Product Categories
Product Tags
armored thermocouples sensor
blade Fuse Holder
Car blade fuse
Car Fuse
Ceramic Tube Fuse
Circuit Breaker
Disc Thermostats
Ds18b20 Temperature Sensor
electrical Fuse
Fast/slow-blow fuse
Fuse box-holder
Glass Tube Fuse
Inline Fuse Holder
Limit Snap Disc Thermostat
Mini Circuit Breakers
Motor overload protector
Motor thermal protection
NTC sensor
NTC thermistor sensor
PCB Mount Fuse Holder
PPTC Resettable Fuse
PT100 Temperature sensor
PTC thermistor
sensor connector harness
Sensor Probes & Cables
Slow Blow Micro Fuse
Surface Mount Fuses
Temp Cutoff Link
Temperature control switch
Temperature Fuse
Temperature Sensor
Temperature sensor cable
Temperature Sensor Probe
temp switch
Thermal cut-off
Thermal Cut out Switch
Thermal Fuse
thermal protector
Thermal switch
Thermistor Sensor Probe
Defrost Low Temperature Thermal Cutoff Switch
Defrost Thermal Cutoff Switch Feature:1. Use the defrost temperature control switch + thermal fuse harness : Refrigerators are generally equipped with a cooling regulator. Users can adjust the temperature inside the refrigerator by turning the knob of the cooling regulator. Generally speaking, the temperature adjustment range is 1℃-7℃, and users can adjust it freely according to their needs.
Category: Thermal switch
Tags: temp switch, Thermal Cut out Switch, thermal protector, Thermal switch
Defrost Thermal Cutoff Switch Feature:
1. Use the defrost temperature control switch: Refrigerators are generally equipped with a cooling regulator. Users can adjust the temperature inside the refrigerator by turning the knob of the cooling regulator. Generally speaking, the temperature adjustment range is 1℃-7℃, and users can adjust it freely according to their needs.
2. Use an electronic control panel: Some high-end models of refrigerators are equipped with electronic control panels through which users can adjust the temperature of the refrigerator. Generally speaking, users can see the current temperature on the electronic control panel and adjust the temperature through buttons or knobs.
3. Adjust the built-in temperature controller of the refrigerator: Some refrigerators have a built-in temperature controller. Users can adjust the temperature by opening the refrigerator door and finding the built-in temperature controller. Generally speaking, the temperature controller is usually located on the top or side of the refrigerator. Users can adjust the temperature of the refrigerator by turning the knob on the temperature controller.
No matter which method is used, users need to note that adjusting the temperature of the refrigerator is not an immediate thing and usually requires a certain amount of time to reflect. In addition, in order to avoid improper temperature adjustment causing the refrigerator to not work properly, it is recommended that users carefully read the operating instructions of the refrigerator before use.
- Slim
- With plastic casing can be completely waterproof
- Dual contact the contact, the contact resistance excellent.
- Get SEMKO, UL, CAS certification
specification:
- Rated voltage and current 15A / 125V AC
7.5A / 250V AC
- Operating temperature range -20C- 150C
- The maximum service life 100,000 Cycle
product name | LG6615JB2003J refrigerator defrost thermostat on Klixon |
use | Temperature control / overheating protection |
Reset Type | automatic |
Basic materials | Heat-resistant resin matrix |
Electrical Ratings | 15A/125VAC,7.5A/250VAC |
maximum. Operating temperature | 150℃ |
lowest. Operating temperature | -20℃ |
tolerance | +/- 5 ℃, open the Action (optional +/- 3 C or lower) |
Protection class | IP00 |
Contact Material | silver |
Dielectric strength | AC 1500V1 minutes or seconds AC1800V1 |
Insulation resistance | DC 500V more than 100MW by Meg tester |
Resistance between terminals | Less than 100mW |
Bimetal Diameter | Φ12.8mm(1/2“) |
Authenticate | UL/ TUV/ VDE/ CQC/ KC |
terminal type | custom made |
Cover / Stand | custom made |
6. optimum temperature °c | ||||||||||||
| ||||||||||||
7. bottom temperature tolerance code | ||||||||||||
| ||||||||||||
8. optimum temperature°c | ||||||||||||
| ||||||||||||
9. bottom temperature tolerance code | ||||||||||||
|
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
China Thermal switch Manufacturers
What Is A Thermal switch?
Thermal switch is based on the working environment of the temperature changes, physical deformation occurs inside the product, a control element which is automatically turned on or off, also known as temperature control switch, thermal protection, temperature controller and so on. Commonly used temperature control methods are:
CREEP ACTION THERMOSTAT, MOTOR PROTECTOR
VA1/VAA1 replaces the PEPI creep action thermostat bimetal thermal protector with higher current sensitivity:
[The PEPI CREEP ACTION THERMOSTAT] VAA1 adopts bimetallic control, and the inside is a low-resistance circuit with gold-plated contacts. Constant temperature control design and small size. It is suitable for electric blankets, electric heating pads and all kinds of small household appliances that require constant temperature function.
Custom Bimetal Disc Snap Thermostat
KSD301/KSD302 (NO/NC) series of products is the most widely used Bi-metal Disc Thermostat. In YaXun, we provide high-precision dish-type bimetallic stamping, temperature classification, assembly, product testing one-stop service. Our product development for the needs of the market, there are a variety of different product size, different temperature control methods.
Thermal Cut out Switch
The function of automatic cut-off switch to prevent overheating
The automatic cut-off device against overheating is an electronic technology protection device. It can automatically cut off the power supply when electrical equipment overheats to avoid damage and danger caused by overheating of electrical equipment. In modern electrical equipment, automatic cut-off devices to prevent overheating have become an indispensable safety measure.