Product Categories
Product Tags
armored thermocouples sensor
blade Fuse Holder
Car blade fuse
Car Fuse
Ceramic Tube Fuse
Circuit Breaker
Disc Thermostats
Ds18b20 Temperature Sensor
electrical Fuse
Fast/slow-blow fuse
Fuse box-holder
Glass Tube Fuse
Inline Fuse Holder
Limit Snap Disc Thermostat
Mini Circuit Breakers
Motor overload protector
Motor thermal protection
NTC sensor
NTC thermistor sensor
PCB Mount Fuse Holder
PPTC Resettable Fuse
PT100 Temperature sensor
PTC thermistor
sensor connector harness
Sensor Probes & Cables
Slow Blow Micro Fuse
Surface Mount Fuses
Temp Cutoff Link
Temperature control switch
Temperature Fuse
Temperature Sensor
Temperature sensor cable
Temperature Sensor Probe
temp switch
Thermal cut-off
Thermal Cut out Switch
Thermal Fuse
thermal protector
Thermal switch
Thermistor Sensor Probe
temperature sensing probe (PT100, thermistor) Manufacturer
The temperature sensor known as the temperature sensing probe . In the home appliance control, it is generally used as a sensing element (PT100, thermistor, Ds18b20) that senses the temperature of a specific part, and converts the temperature signal into an electrical signal to control the system to operate in a prescribed mode. The temperature sensors used in the refrigerator industry are mainly direct-heated negative temperature coefficient (NTC) thermistors: That is, in the working range, the thermistor whose resistance value decreases as the temperature of its resistor body increases.
Precautions for using the temperature probe:
In order to feel the accuracy of the temperature point, each temperature sensor must be fixedly installed in the corresponding position. In particular, the temperature probe of each evaporator must be closely attached to the evaporator and in good contact with the evaporator. The sensing line and the temperature sensor must be sealed intact, without damage or cracking, to avoid parameter drift caused by moisture intrusion.
The first NTC sensor: Next to the second tube of the evaporator in the refrigerator;
The second NTC sensor: Inside the hinged lid on the door;
The third thermistor sensor: On the right side of the inner shelf of the upper shelf of the fruit and vegetable box in the refrigerator;
The fourth PT100 sensor: Beside the refrigeration tube behind the second drawer of the freezer;
5th Ds18b20 sensor: Inside the soft freezer evaporator.
The main function of the refrigerator NTC sensor:
1. Variable temperature zone Ds18b20 sensor: Temperature sensor for displaying the temperature and control of the changing greenhouse.
2. Refrigerator evaporator NTC sensor: Temperature sensor for controlling the temperature of the refrigerator compartment.
3. Defrost NTC sensor: The temperature sensor is generally disconnected at normal temperature, closed below -7 ° C, and the defrosting heater is energized to generate heat and defrost the evaporator.
4. The refrigerator operation sensor is used to observe whether the compressor is running.
5. The compressor protection sensor is used to protect the compressor.
6. There is a sensor for the refrigerator door. When the refrigerator door is opened, the light inside the refrigerator is turned on, the refrigerator door closed light is turned off, and so on.
model | Rated resistance value(R25) | B value | Operating temperature | Dissipation factor(mW/℃) | Thermal time constant(S) | |
resistance value (KΩ) | Tolerance (± %) | Nominal value (K) | ||||
MF53-102-3950 | 1 | ±1% ±2% ±3% ±5% | 3950 | -40℃ ~ +300℃ | ≥2.0 Still air | ≤15 Still air |
MF53-202-3435 | 2 | 3435 | ||||
MF53-472-3950 | 4.7 | 3950 | ||||
MF53-502-3470 | 5 | 3470 | ||||
MF53-502-3950 | 5 | 3950 | ||||
MF53-682-3950 | 6.8 | 3950 | ||||
MF53-103-3435 | 10 | 3435 | ||||
MF53-103-3470 | 10 | 3470 | ||||
MF53-103-3600 | 10 | 3600 | ||||
MF53-103-3950 | 10 | 3950 | ||||
MF53-103-3977 | 10 | 3977 | ||||
MF53-103-4100 | 10 | 4100 | ||||
MF53-153-3950 | 15 | 3950 | ||||
MF53-203-3950 | 20 | 3950 | ||||
MF53-233-3950 | 23 | 3950 | ||||
MF53-303-3950 | 30 | 3950 | ||||
MF53-333-3950 | 33 | 3950 | ||||
MF53-40.27-3950 | 40.27 | 3950 | ||||
MF53-473-3950 | 47 | 3950 | ||||
MF53-493.12-3950 | 49.12 | 3950 | ||||
MF53-503-3950 | 50 | 3950 | ||||
MF53-503-3990 | 50 | 3990 | ||||
MF53-503-4050 | 50 | 4050 | ||||
MF53-104-3950 | 100 | 3950 | ||||
MF53-104-3990 | 100 | 3990 | ||||
MF53-104-4200 | 100 | 4050 | ||||
MF53-204-3950 | 200 | 3950 | ||||
MF53-204-4260 | 200 | 4260 |
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
DALLAS Ds18b20 Temperature Sensor Probe
Ultra-small size, ultra-low hardware overhead, strong anti-interference ability, high precision, and strong additional functions make DS18B20 more popular. The advantages of DS18B20 are our best choice for learning microcontroller technology and developing temperature-related small products. Understanding the working principles and applications can broaden your ideas for microcontroller development.
probe & cable of thermal resistance sensor
The probe & cableof platinum resistance sensor: stainless steel probe package, thread, magnetic body package, spring top tight, ABS shell, glass fiber and other waterproof protection temperature probes and High temperature wire silicone braided cable, mica wire, glass fiber wire, electronic wire, Teflon wire.
Production of platinum temperature sensor
STT-M series temperature sensors Probe are packaged with magnetic bodies. For paramagnetic metal surfaces, it can be easily sucked to the surface for temperature measurement and can be easily installed and removed. It is suitable for the detection of the key point temperature of large equipment before leaving the factory, and other occasions where the temperature detection point needs to be replaced frequently, so as to improve the efficiency of temperature detection
PT100 RTD sensor Probe & Cables
PT100 thermal resistance acquisition modules can be connected to the RS-485 local control network through the isolated 485 communication interface. RS-485 allows up to 32 PT100 thermal resistance acquisition modules to be hung on the same bus. However, if Link-Max's RS-485 repeater is used, up to 256 PT100 thermal resistance acquisition modules can be connected to the same network, and the maximum communication distance is 1200m.