Биметален термичен протектор NO Превключвател за контрол на температурата KSD9700 / Секи

Процес на персонализиран малък биметален термичен протектор NO / NC (KSD9700 / Пластмасов превключвател за контрол на температурата Seki, Биметални; Номинално напрежение : 250V; Текущ : 5A~25 Amp ; ).

Персонализиран -20~280℃ Hi-Amp Температурен ограничител Малък размер Термичен протектор Превключвател

Uxcell KSD9700 Thermostat 55℃ N.C 10A Metal Bimetal Temperature Control Switch

Биметален термичен протектор NO Превключвател за контрол на температурата 250V 40-100 ℃

Bimetal Thermal Protector is a temperature control switch that uses bimetal as a temperature sensing element. Когато уредът работи нормално, the bimetal strip is in a free state and the contacts are in a connected state. When the temperature rises to the operating temperature point, the bimetal element is heated to generate internal stress and quickly operates, opening the contacts and cutting off/connecting the circuit, като по този начин играе термична защитна роля. When the ambient temperature drops to the reset temperature of the protector, the contacts will close again to connect the circuit.

Име на продукта : Temperature Control Switch;
Модел. No : KSD9700;
Материал : Пластмаса, Биметални
Контакт : NC(Normal Close);
Номинално напрежение : 250V;
Текущ : 5A~25 Amp
Max Rated Disconnection Temperature : 70° С;
Цвят : Silver Tone, черен
Дължина на кабела : 6.5cm/ 2.6″;
Head Dimension : 20 х 8 x 3mm / 0.79″ x 0.31″ x 0.12″(L*W*T)

I’m looking KSD9700 temperature switches and came across this type which warns against shorts and instructs you to use a provided plastic sleeve to prevent this.

I’d like to understand exactly what could short to what. I wouldn’t have thought that the outer metal shell would be conductive to the leads, but is that actually what this warning is about? If not, what are they warning against? YES

Aside from the risk of a short causing a problem, I would ideally want the metal case to be directly on the object whose temperature is being measured for the fastest response without any insulating effect of the plastic.

Process of Custom Thermal Protector NO / NC (KSD9700 / Секи) Temperature Control Switch
①: Обсъдете изискванията с клиентите (контрол на температурната точка на термично изключване, режим на действие (ръчно и автоматично нулиране), нулиране на температурата, начин на монтаж и размер);
②: Submit preliminary plan for feasibility analysis of customer request;
③: Financial accounting cost;
④: Technical preparation experiment and design simulation;
⑤: Procurement investigation of various material costs;
⑥: Production knows product processing flow and staffing;
⑦: Quality evaluation and inspection process;

Описание на продукта

What’s the difference between N/C and N/O
Нормално затворен: When the temperature falls to the reset temperature, the thermostat contact can be connected again.
Нормално отворен: When the temperature falls to the reset temperature, the thermostat contact can be disconnected again.

KSD9700 Seki Temperature Control Switch Dimension & Структура