Комплект модулен модул за цифров DS18B20 температурен сензор Водоустойчив 100CM сензорен кабел

1-Wire interface Digital DS18B20 Temperature Sensor, Използваем температурен диапазон: -55 до 125°C (-67°F до +257°F) · 9 към 12 bit . DS18B20 3M Cable Digital Temperature Thermal Waterproof Probe Sensor -55°C to +125°C compatible with Arduino and Raspberry Pi Open Source Programming!

Цифров температурен 1-жилен сензор DS18B20 Водоустойчив, 1м

Температурен сензор DS18B20, съвместим с Arduino и Raspberry Pi

DS18B20 Цифров температурен сензор -55 до 125°C (-67°F до +257°F) Module For Arduino

Китайските потребителски цифрови температурни сензори се доставят с оригиналния DS18B20, високо качество в корпус от неръждаема стомана (6 * 30мм) и 3м #24 30# 2651, UL4411 28# Силиконов кабел (120 инча) по дължина.
DS18B20 temperature sensor will enable you to easily measure and read the temperature via available and open-source libraries.
Our DS18B20 temperature sensor is perfect to use with Arduino and Raspberry Pi and other microcontrollers, and due to waterproof cable is also suitable for outdoor use.
Simple temperature readout through ready-to-use open source libraries for the DS18B20 temperature sensor! Wide measuring range from -55°C to +125°C and low deviation of only +/- 0.5°C between -10°C and +85°C!

Име на продукта:	1-Wire DS18B20 Temperature Sensor	Изход:	Digital Sensor
Кабел:	Персонализирано	Voltage Supply:	3.0V~5.5V
Работна температура:	-55°C ~ 125°C	Max Power:	450mW
Shell Material:	Неръждаема стомана	Конектор:	2.54MM Connector
Drivepipe:	Heat Shrinkable Tube	Характеристика:	Waterproof
Висока светлина:	5.5VDC DS18B20 Temperature Sensor use with Arduino and Raspberry Pi

Описание на продукта
Stainless Steel Package Waterproof Probe NTC Digital Temperature Sensor DS18B20 Temperature Sensor
Изход: Digital
Usage: Temperature measurement use with Arduino and Raspberry Pi
Дължина на кабела: Custom 0.5M, 1М, 2M or more
Theory: Resistance Sensor
Probe material: Неръждаема стомана
точност: -10~+125℃, the accuracy is±0.5℃
Cable material: PVC, Silicone,PTFE

Description of Digital DS18B20 Temperature Sensor
DS18B20 temperature sensor is composed of DALLAS, Stainless steel probe, cable and connectors. DS18B20 е често използван цифров температурен сензор, and its output is digital signal. Има характеристиките на малък размер, ниски хардуерни разходи, силна способност против смущения и висока точност.

Specification of Digital DS18B20 Temperature Sensor

Digital chip	DS18B20
Захранване	3.0~5.5VDC
Resolution ratio	9~12 bit, Corresponding distinguish temperature are 0.5℃,0.25℃,0.125℃ and 0.0625℃
Tolerance	-10℃ to +125℃ ±0.5℃
Treatment proccess	Waterproof
Диапазон на работната температура	-50~+125℃ (when the temperature is -10~+85℃, the accuracy is±0.5℃)
Shell size	Диаметър:¢6~¢9mm,дължина : 10mm~1000mm
Тел	UL Series(such as UL1007), Supply line number, using temperature range, outside diameter and material requirements.
Shell material	Stainless steel
Конектор	Молекс, JST, DuPont, CWB, CJT, U type etc.
Drivepipe	Heat shrinkable tube; PVC tube, glass fiber tube;
Connection mode	черен : GND， Жълто: DATA Red:VDD+

Characteristic of Stainless Steel Digital DS18B20 Temperature Sensor
1. Digital signal output
Wire interface Requires Only one port pin for communication. Requires no external components

2. High Accuracy
Диапазон на работната температура:-55°C до +125 °C (-67F to +257F), ±0.5°C accuracy from -10°C to +85°C

3. Data Line Power Supply
Can be powered from data line. Power supply range is 3.0V to 5.5V

4. Fast Response
Thermometer resolution is programmable from 9 към 12 битове.

5. Various Probe Design
Probe dimension :6*30мм, 6*50mm or customized

Application of Waterproof Digital DS18B20 Temperature Sensor
Water Temperature Monitoring, ОВК, Medical Instrument, GPS Oil Tank Temperature Monitoring

FAQ of DS18B20 Temperature Sensor
Q: Where physically on the device does the temperature measurement take place?
А: The DS18B20 does not sense temperature directly through the package. For all package types, the DS18B20 senses temperature primarily through the GND pin. Ensuring a good thermal connection between the GND pin of the device and the heat source you wish to measure will provide the best results.

Q: Is there a way to extend the temperature range of the DS18B20?
А: No, there is not a way to increase the range it reads. The DS18B20 reads with an accuracy of ±0.5°C from -10°C to +85°C and ±2°C accuracy from -55°C to +125°C.