Θερμοστάτης δίσκου δίσκων διμερών

Ο θερμοστάτης δίσκου δίσκου ( Κιτ θερμικής αποκοπής, κιτ θερμικού διακόπτη δίσκου Snap Disc) Αποτρέπει τον υπερθέρμανση του στεγνωτηρίου όταν ο θερμικός διακόπτης του στεγνωτηρίου αποτυγχάνει σε κατάσταση κλειστού κυκλώματος.

Ο θερμοστάτης δίσκου δίσκου ( Κιτ θερμικής αποκοπής, κιτ θερμικού διακόπτη δίσκου Snap Disc) Αποτρέπει τον υπερθέρμανση του στεγνωτηρίου όταν ο θερμικός διακόπτης του στεγνωτηρίου αποτυγχάνει σε κατάσταση κλειστού κυκλώματος. This part Cut-Off Circuit when the heater housing does not have adequate airflow through it; this is normally caused by restriction in the exhaust vent, plugged lint screen, or broken blower wheel. If this part fails, the dryer may not produce any heat. This kit includes one snap disc Thermal switch with a limit of 250 βαθμούς Φαρενάιτ, and one thermal cut-off fuse. jumper wires, and new female spade terminals Wire harness . Both components are mounted on the heater housing, and measure approximately 2 inches long and 1.5 inches wide each. This Thermal Cut-Off comes in silver and is constructed of metal.

Technical Parameters
1. Ηλεκτρικές παραμέτρους: 1) CQC, VDE, UL, CUL? AC250V 50 ~ 60Hz 5A / 10ΕΝΑ / 15ΕΝΑ (ωμικό φορτίο)
2) UL AC 125V 50Hz 15A (ωμικό φορτίο)
2. Εύρος θερμοκρασίας λειτουργίας: 0 ~ 240 ° C (προαιρετικός), temperature accuracy: ± 2 ± 3 ± 5 ± 10 ° C
3. The difference between recovery and action temperature: 8 ~ 100 ℃ (προαιρετικός)
4. Μέθοδος καλωδίωσης: plug-in terminal 250 # (optional bend 0 ~ 90 °); plug-in terminal 187 # (optional bend 0 ~ 90 °, πάχος 0.5, 0.8mm προαιρετικά)
5. Service life: ≥100,000 times
6. Ηλεκτρική αντοχή: AC 50Hz 1800V για 1 λεπτό, κανένα τρεμόπαιγμα, καμία βλάβη
7. Αντοχή επαφής: ≤50mΩ
8. Αντοχή μόνωσης: ≥100MΩ
9. Φόρμα επικοινωνίας: Κανονικά κλειστό: temperature rise, contact open, temperature drop, contact open;
Κανονικά ανοιχτό: Temperature rises, contacts turn on, πέφτει η θερμοκρασία, contacts turn off
10. Enclosure protection level: IP00
11. Μέθοδος γείωσης: Connected to the grounded metal parts of the device through the thermostat metal case.
12. Μέθοδος εγκατάστασης: It can be directly reinforced by the mother.
13.Temperature working range: -25 ℃ ∽ + 240 ℃ + 1 ℃ ∽2 ℃
Χαρακτηριστικά
It has the characteristics of stable performance, high accuracy, μικρό μέγεθος, ελαφρύ βάρος, υψηλή αξιοπιστία, μακρά ζωή, and little concern for radio.

 Bimetal thermal protection

Bimetal thermal protection

Reset Snap Disc Thermostat

Reset Snap Disc Thermostat

Διακόπτες θερμικής αποκοπής στεγνωτηρίου

Διακόπτες θερμικής αποκοπής στεγνωτηρίου

Επικοινωνήστε μαζί μας

Αναμονή για το email σας, θα σας απαντήσουμε εντός 12 ώρες με πολύτιμες πληροφορίες που χρειαζόσουν.

ΣΧΕΤΙΚΑ ΠΡΟΪΟΝΤΑ

Ζητήστε μια προσφορά

Συμπληρώστε τη φόρμα αιτήματος προσφοράς και θα απαντήσουμε στο μήνυμά σας το συντομότερο δυνατό!