English
العربية
Български
粤语
中文(简体)
中文(漢字)
Nederlands
Suomi
Français
Deutsch
Ελληνικά
Magyar
Italiano
日本語
한국어
Polski
Português
Română
Русский
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Tiếng Việt
sensor NTC
Medical surface temperature sensor for infants with tolerance of ±0.1℃
Medical surface temperature sensor is used to measure human surface temperature. The product nominal resistance is 2.252kΩ or 10kΩ. The probe is a stainless steel φ5.6 probe, which can be equipped with a 2-pin aviation plug (or other plugs according to customer requirements). The measurement temperature tolerance is (25℃~45℃) ±0.1℃.
Micro medical radiofrequency ablation electrode temperature sensor
φ0.30mm PI tube packaged medical temperature sensor. This product is a miniature medical radiofrequency ablation electrode temperature sensor. The product uses a polyimide tube with an outer diameter of Maxφ0.30mm to encapsulate epoxy resin, and the lead wire uses an enameled wire with an outer diameter of 0.05mm. The resistance value of the miniature thermistor sensor is calibrated one by one.
NTC Sensor for Thermostat Temperature Controller air Conditioner, Refrigerator
Custom 5K 10K 15K 20K 25k 50K 100K NTC thermistor sensors ( rubber head copper head sensor probe Kit ) are used to measure the temperature of the HVAC, Freezer, evaporator and of the conditioned interior. An air-conditioning installation can also serve for heating in winter.
Sensor de temperatura NTC
What Is The NTC Temperature Sensor? NTC temperature sensor is an thermistor after the wire welding, encapsulate into a different probe and then use an epoxy seal. The temperature sensor retains all the features of the thermistor. After the optimization of the injection and cooling stages, will be made into a complete product, mass production is a continuous cycle of this processing step produced.
Línea de adquisición de temperatura BMS del sensor de temperatura NTC
El sensor de temperatura NTC BMS es un dispositivo pequeño pero preciso diseñado para sistemas de gestión de baterías. (BMS) temperatura controlada. Línea de adquisición de temperatura BMS Con terminal de anillo para una fácil conexión, Se basa en la tecnología NTC para monitorear las variaciones de temperatura en los paquetes de baterías.. Este sensor es crucial para mantener la seguridad y eficiencia de la batería., evitando el sobrecalentamiento o daños. Su sencilla instalación e integración en sistemas BMS lo convierten en una herramienta indispensable para una gestión eficaz de la temperatura de la batería..
Sensor de temperatura NTC con línea de conexión de terminal de sobremoldeo
NTC temperature sensor probe with Overmolding Connector (JST, Molex, RJ11, RJ12, RJ45, RJ50, XH, SM, PH, Aviation plug, terminal blocks, 5557, Faston terminal, audio jack, etc.). The sensor head is made from TPE material, which has a good adhesion and sealing.
Sonda y cable de termistor NTC
Sonda/conjunto NTC de temperatura superficial; Conjunto/Sonda NTC Aire-Gas; Conjunto/sonda NTC del sistema HVAC/refrigeración; Conjunto/sonda NTC de nivel de líquido; Sonda/conjunto NTC de monitorización de pacientes.
NTC Thermistor Sensor Water Temperature Measurement using EPCOS NTC thermistor
1k, 2k, 2.7k, 3k, 5k, 10k, 15k, 20k, 30k, 40k, 47k, 50k, 100k, 200k ohm; B25/50: 3950 3435 3977K thermistor probe ntc temperature Measurement sensor using EPCOS NTC thermistor. NTC Thermistors sensor provide voltage and noise suppression as well as temperature measurement and compensation in automotive applications. These thermistors sensor probe feature multilayer NTC with inner electrodes, nickel barrier termination, and superior resistance temperature Measurement stability during soldering.
NTC thermistor sensors probe used in Electric Heater
NTC thermistor sensors design is focused on the heater requirements control with 3 Meter PVC Cover Cable and widely used in dry and high temperature environments. UL recognized models available upon request.
CNT, PTC, PT100, DS18B20 para sensores de sonda de temperatura
Thermocouple probe: It uses the thermoelectric effect to measure temperature, and has the characteristics of a wide measurement range and fast response speed.
Thermal resistance probe: uses the property that the resistance of metal or semiconductor materials changes with temperature to measure temperature, and has the characteristics of high measurement accuracy and good stability.
Semiconductor probe: uses the property that the conductivity of semiconductor materials changes with temperature to measure temperature, and has the characteristics of small size, light weight and low power consumption.
SHIBAURA Thermistor Sensor Components – Probes
KG3 thermistor (KG3, KG3B-35, KG3B-41, KG3T-43, KG3T-45, KG3T-51); KG2 thermistor (KG2, KG2B-35, KG2B-41, KG2T-43, KG2T-45, KG2T-51); RB1 thermistor series (RB1-N, RB1-S1, RB1-S3); PL thermistor series (PL, PL2, PL3); NSⅢ-U1 thermistor (NSⅢ-U1); NSⅡ-E3 thermistor (NSⅡ-E3); ADVANCED NSⅡ-E1 thermistor (NSⅡ-E1);
Stainless Steel NTC Thermistor Probe B3950 10K in water dispenser
The NTC temperature sensor 1% B3950 10K, 5 x 25mm with XH2.54 Connector in a water dispenser is a device used to measure the temperature of water. This sensor is usually a temperature sensor that converts the temperature information of the water into an electrical signal.