Protector térmico bimetálico SIN interruptor de control de temperatura KSD9700 / seki

Proceso de protector térmico bimetálico de tamaño pequeño personalizado NO / CAROLINA DEL NORTE (KSD9700 / Interruptor de control de temperatura Seki Plástico, Bimetálico; Tensión nominal : 250V; Actual : 5~ 25 amperios ; ).

Interruptor protector térmico de tamaño pequeño, limitador de temperatura de alto amperaje personalizado -20~280℃

Uxcell KSD9700 Thermostat 55℃ N.C 10A Metal Bimetal Temperature Control Switch

Protector termal bimetálico NINGÚN interruptor de control de temperatura 250V 40-100℃

Bimetal Thermal Protector is a temperature control switch that uses bimetal as a temperature sensing element. Cuando el aparato funciona normalmente, the bimetal strip is in a free state and the contacts are in a connected state. When the temperature rises to the operating temperature point, the bimetal element is heated to generate internal stress and quickly operates, opening the contacts and cutting off/connecting the circuit, desempeñando así un papel de protección térmica. Cuando la temperatura ambiente desciende hasta la temperatura de reinicio del protector, Los contactos se cerrarán nuevamente para conectar el circuito..

Nombre del producto : Temperature Control Switch;
Modelo. No : KSD9700;
Material : Plástico, Bimetálico
Contacto : CAROLINA DEL NORTE(Normal Close);
Tensión nominal : 250V;
Actual : 5~ 25 amperios
Max Rated Disconnection Temperature : 70do;
Color : Silver Tone, Negro
Cable Length : 6.5cm/ 2.6″;
Head Dimension : 20 X 8 x 3mm / 0.79″ x 0.31″ x 0.12″(L*W*T)

I’m looking KSD9700 temperature switches and came across this type which warns against shorts and instructs you to use a provided plastic sleeve to prevent this.

I’d like to understand exactly what could short to what. I wouldn’t have thought that the outer metal shell would be conductive to the leads, but is that actually what this warning is about? If not, what are they warning against? YES

Aside from the risk of a short causing a problem, I would ideally want the metal case to be directly on the object whose temperature is being measured for the fastest response without any insulating effect of the plastic.

Process of Custom Thermal Protector NO / CAROLINA DEL NORTE (KSD9700 / seki) Temperature Control Switch
①: Discutir los requisitos con los clientes. (Controlar el punto de temperatura de corte térmico., modo de acción (reinicio manual y automático), restablecer la temperatura, método de instalación y tamaño);
②: Submit preliminary plan for feasibility analysis of customer request;
③: Financial accounting cost;
④: Technical preparation experiment and design simulation;
⑤: Procurement investigation of various material costs;
⑥: Production knows product processing flow and staffing;
⑦: Quality evaluation and inspection process;

Descripción del Producto

What’s the difference between N/C and N/O
Normalmente cerrado: When the temperature falls to the reset temperature, the thermostat contact can be connected again.
Normalmente abierto: When the temperature falls to the reset temperature, the thermostat contact can be disconnected again.

KSD9700 Seki Temperature Control Switch Dimension & Structure