Proveedor de interruptor térmico a presión de límite bimetálico SPST de China

SPST-NO/NC Interruptor térmico bimetálico Las aplicaciones incluyen motores eléctricos, calentador, transformadores, bobinas térmicas, electrónica, climatización, y electrodomésticos. Interruptor térmico bimetálico a presión de límite personalizado de China (250v 10a / 125en 16a) es un dispositivo sensor de temperatura que está hecho con un disco bimetálico formado de 1/2 ′ ′ o 3/4 ′′ que se “encaja” a una temperatura preestablecida. YAXUN KSD9700, ST-22, TB02 Series Bimetal Snap-Action Temperature Switches are based on a bimetal snap disc two-contact system with response sensitivity to a combination of temperature and current. The functions of these switches include thermal motor protection, temperature limiting, and thermal cut-off. The series features high power ratings and no vibrational noise, with availability in normally closed or normally open configurations. The KSD302/17AM/6ap/S06/S01 Series switches are sealed so they can be used in vacuum-impregnated applications with various varnishes and glues. The rated maximum currents are 6.3A (type T12) with maximum switching currents of 60A. A low tolerance of ±1K is possible with the T10 models. KSD302 Series Bimetal Snap-Action Temperature Switches are available in a wide range of packaging, mounting, and design options and can be wired in twin or triplet configurations.

Limit Snap Thermal Switch THERMOSTAT 37DEG C SPST-NC Senser

Sonda de interruptor térmico bimetálico para protección contra sobrecalentamiento del motor.

Interruptor termal bimetálico de la ingeniería 25a~60 Amp del interruptor de temperatura del disco del reinicio manual

KSD301, KSD302, KSD303 Series Limit Snap Thermal Switch
Aplicaciones
⑴ sterilizer,
⑵ dishwasher,
⑶ dryer,
⑷ microwave,
⑸ drinking fountains,
⑹ electric kettle,
⑺ office equipment,
⑻ coffee maker,
⑼ sandwich toaster,
⑽ car seat heaters, automobile antifreeze, electric cooker, refrigerador, acondicionador de aire, laminator and other electric appliances.

Manual Reset Disc Temperature Switch Bimetal Thermal Switch installation dimensions

●KSD301, KSD302, KSD303 series Limit Snap Thermal Switch technical parameters
⑴ parámetros eléctricos: 1) CCC, TUV, UL, CUL AC250V 50 ~60Hz 5A / 10A / 16A (carga resistiva)
2) UL AC125V 50Hz 16A (carga resistiva),
Temperature Performance
Normalmente cerrado, operating temperature：170±3℃ ；Restablecer temperatura: ON: 155±5.
⑵ rango de temperatura de funcionamiento: 0-230 ℃ (opcional), exactitud de la temperatura: ± 2 ± 3 ± 5 ± 10 ℃
⑶ reply and action temperature difference: 8 ~ 100 ℃ (opcional)
⑷ Conexión: terminales de enchufe 250 # (doblar 0 ~ 90 ° opcional); terminales de enchufe 187 # (doblar 0 ~ 90 ° optional thickness 0.5,0.8mm optional)
⑸ vida: ≥ 100,000 veces
⑹ fuerza eléctrica: CA 50 Hz 1800 V duró 1 minuto., sin parpadeo, sin avería
⑺ contact resistance: ≤50mΩ
⑻ Resistencia de aislamiento: ≥100MΩ
⑼ Formulario de contacto: Normally closed type: aumento de temperatura, contactos abiertos, la temperatura baja, contacto conectado;
Tipo normalmente abierto: aumento de temperatura, contacto conectado, la temperatura baja, the contact is open
⑽ grado de protección de la carcasa: IP00
Instalación: Anillo de actividades ordinarias de instalación serie KSD301, instalación de anillos pequeñas actividades redondas, instalación de anillo activo de panel plano, ordinary large aluminum cover with mounting holes, with mounting holes lengthened aluminum cover.

●KSD301, KSD302, KSD303 series Limit Snap Thermal Switch competitive advantage
⑴ rendimiento estable
⑵ alta precisión
⑶ tamaño pequeño, peso ligero
⑷ alta confiabilidad, larga vida
⑸ dry worries small radio
⑹ no arc

●KSD301, KSD302, KSD303 series Limit Snap Thermal Switch Notice
⑴ grounding: The thermostat metal cover metal parts connected to the equipment grounding.
⑵ when using contact temperature installation should be charged with snapping the metal to cover up the installation of surface equipment, to ensure that the temperature effect, should be coated with thermal grease or other properties like heat transfer medium in surface temperature.
⑶ not install when the top cover surface collapsed, loose or deformed, so as not to affect performance.
⑷ not allow liquid to penetrate the internal temperature, not cause the shell cracks, not free to change the shape of the external terminals.
⑸ product in less than 5A current of the circuit used, should be selected cross-section of 0.5 5-1㎜2 copper wires; not more than 10A current in the circuit, chose the copper wires cross-section 0.75-1.5㎜2 .
⑹ product should be less than 90% relative humidity, ambient temperature below 40 ℃ ventilated, limpio, seco, non-corrosive gases stored in the warehouse.
⑺ use can not bend the terminals, otherwise it will affect the reliability of the electrical connections.

KSD301 OPEN TEMP&RESTABLECER TEMPERATURA

CÓDIGO	TEMPERATURA ABIERTA	RESTABLECER TEMPERATURA	CÓDIGO	TEMPERATURA ABIERTA	RESTABLECER TEMPERATURA
45	45±5°C	≥33°C	140	140±5°C	100±15°C
50	50±5°C	≥35°C	145	145±5°C	100±15°C
55	55±5°C	42±6°C	150	150±5°C	105±15°C
60	60±5°C	45±8°C	155	155±5°C	110±15°C
65	65±5°C	48±10°C	160	160±5°C	115±15°C
70	70±5°C	50±12°C	165	165±5°C	120±15°C
75	75±5°C	53±14°C	170	170±3°C	155±5°C
80	80±5°C	55±15°C	175	175±5°C	130±15°C
85	85±5°C	60±15°C	180	180±5°C	135±15°C
90	90±5°C	65±15°C	185	185±5°C	140±15°C
95	95±5°C	70±15°C	190	190±5°C	145±15°C
100	100±5°C	70±15°C	195	195±5°C	150±15°C
105	105±5°C	75±15°C	200	200±5°C	155±15°C
110	110±5°C	75±15°C	205	205±5°C	160±15°C
115	115±5°C	80±15°C	210	210±5°C	165±15°C
120	120±5°C	85±15°C	215	215±5°C	170±15°C
125	125±5°C	85±15°C	220	220±5°C	175±15°C
130	130±5°C	90±15°C	225	225±5°C	180±15°C
135	135±5°C	95±15°C	230	230±5°C	185±15°C