Categorías de Producto
- Sensor de temperatura 32
- Interruptor térmico 58
- Fusible del coche 19
- Fusibles atornillados 7
- fusible térmico 29
- fusibles de montaje en superficie 12
- termistor 2
- Portafusibles de montaje en PCB 27
- Arnés de cableado 1
- Portafusibles de cuchilla 17
- termostato 34
- Fusible eléctrico 14
- Disyuntor térmico 20
- Portafusibles 36
Etiquetas de productos
sensor de termopares blindados
portafusibles de cuchilla
Fusible de cuchilla para coche
Fusible del coche
Fusible de tubo de cerámica
Cortacircuitos
Termostatos de disco
Sensor de temperatura Ds18b20
fusible electrico
Fusible de acción rápida/lenta
Portafusibles
Fusible de tubo de vidrio
Portafusibles en línea
Termostato de disco limitador
Mini disyuntores
Protector de sobrecarga del motor
Protección térmica del motor
sensor NTC
Sensor termistor NTC
Portafusibles de montaje en PCB
Fusible reiniciable PPTC
Sensor de temperatura PT100
termistor PTC
arnés del conector del sensor
Sondas de sensor & cables
Microfusible de acción lenta
Fusibles de montaje en superficie
Enlace de corte temporal
Interruptor de control de temperatura
Fusible de temperatura
Sensor de temperatura
Cable del sensor de temperatura
Sonda del sensor de temperatura
interruptor de temperatura
corte térmico
Interruptor de corte térmico
Fusible térmico
protector térmico
Interruptor térmico
Sonda del sensor del termistor
Digital DS18B20 Temperature Sensor Module Kit Waterproof 100CM Sensor Cable
The China Custom Digital temperature sensors come with the original DS18B20, high quality in a stainless steel housing (6 * 30milímetros) and 3m #24 30# 2651, UL4411 28# Silicone cable (120 inches) in length.
1-Wire interface Digital DS18B20 Temperature Sensor, Usable temperature range: -55 to 125°C (-67°F to +257°F) · 9 to 12 bit . DS18B20 3M Cable Digital Temperature Thermal Waterproof Probe Sensor -55°C to +125°C compatible with Arduino and Raspberry Pi Open Source Programming!
The China Custom Digital temperature sensors come with the original DS18B20, high quality in a stainless steel housing (6 * 30milímetros) and 3m #24 30# 2651, UL4411 28# Silicone cable (120 inches) in length.
DS18B20 temperature sensor will enable you to easily measure and read the temperature via available and open-source libraries.
Our DS18B20 temperature sensor is perfect to use with Arduino and Raspberry Pi and other microcontrollers, and due to waterproof cable is also suitable for outdoor use.
Simple temperature readout through ready-to-use open source libraries for the DS18B20 temperature sensor! Wide measuring range from -55°C to +125°C and low deviation of only +/- 0.5°C between -10°C and +85°C!
Product Name: | 1-Wire DS18B20 Temperature Sensor | Output: | Digital Sensor |
Cable: | Customized | Voltage Supply: | 3.0V~5.5V |
Operating Temperature: | -55°C ~ 125°C | Max Power: | 450mW |
Shell Material: | Acero inoxidable | Connector: | 2.54MM Connector |
Drivepipe: | Heat Shrinkable Tube | Feature: | Waterproof |
High Light: | 5.5VDC DS18B20 Temperature Sensor use with Arduino and Raspberry Pi |
Descripción del Producto
Stainless Steel Package Waterproof Probe NTC Digital Temperature Sensor DS18B20 Temperature Sensor
Output: Digital
Uso: Temperature measurement use with Arduino and Raspberry Pi
Longitud del cable: Custom 0.5M, 1M, 2M or more
Theory: Resistance Sensor
Probe material: Acero inoxidable
Accuracy: -10~+125℃, the accuracy is±0.5℃
Cable material: PVC, Silicone,PTFE
Description of Digital DS18B20 Temperature Sensor
DS18B20 temperature sensor is composed of DALLAS, Stainless steel probe, cable and connectors. DS18B20 is a commonly used digital temperature sensor, and its output is digital signal. It has the characteristics of small size, low hardware overhead, strong anti-interference ability and high precision.
Specification of Digital DS18B20 Temperature Sensor
Digital chip | DS18B20 |
Power supply | 3.0~5.5VDC |
Resolution ratio | 9~12 bit, Corresponding distinguish temperature are 0.5℃,0.25℃,0.125℃ and 0.0625℃ |
Tolerance | -10℃ to +125℃ ±0.5℃ |
Treatment proccess | Waterproof |
Operating temperature range | -50~+125℃ (when the temperature is -10~+85℃, the accuracy is±0.5℃) |
Shell size | Diámetro:¢6~¢9mm,length : 10mm~1000mm |
Wire | UL Series(such as UL1007), Supply line number, using temperature range, outside diameter and material requirements. |
Shell material | Stainless steel |
Connector | Molex, JST, DuPont, CWB, CJT, U type etc. |
Drivepipe | Heat shrinkable tube; PVC tube, glass fiber tube; |
Connection mode | Black : GND, Yellow: DATA Red:VDD+ |
Characteristic of Stainless Steel Digital DS18B20 Temperature Sensor
1. Digital signal output
Wire interface Requires Only one port pin for communication. Requires no external components
2. High Accuracy
Operating temperature range:-55°C to +125°C (-67F to +257F), ±0.5°C accuracy from -10°C to +85°C
3. Data Line Power Supply
Can be powered from data line. Power supply range is 3.0V to 5.5V
4. Fast Response
Thermometer resolution is programmable from 9 to 12 bits.
5. Various Probe Design
Probe dimension :6*30milímetros, 6*50mm or customized
Application of Waterproof Digital DS18B20 Temperature Sensor
Water Temperature Monitoring, HVAC, Medical Instrument, GPS Oil Tank Temperature Monitoring
FAQ of DS18B20 Temperature Sensor
Q: Where physically on the device does the temperature measurement take place?
A: The DS18B20 does not sense temperature directly through the package. For all package types, the DS18B20 senses temperature primarily through the GND pin. Ensuring a good thermal connection between the GND pin of the device and the heat source you wish to measure will provide the best results.
Q: Is there a way to extend the temperature range of the DS18B20?
A: No, there is not a way to increase the range it reads. The DS18B20 reads with an accuracy of ±0.5°C from -10°C to +85°C and ±2°C accuracy from -55°C to +125°C.
Contáctenos
Esperando tu email, le responderemos dentro de 12 horas con la valiosa información que necesitabas.
PRODUCTOS RELACIONADOS
China Custom Thermistor sensor Probe Assembly for temperature control
High-End Resistor sensor Probe Manufacturer — YAXUN specializes in thermistor featuring temperature sensitivity and AEC-Q200 qualified. TCTR - NTC Thick Film Thermistor. 47-1.6MΩ. Tightest tolerance 1%. B Value 2410K - 4800k.
Thermistor Temp Sensor — Silicon-Based Linear Thermistors At The Same Cost And Size Of Traditional NTC Thermistors. Achieve High Accuracy System Reliability With The Industry's Smallest Linear Thermistors.
Sensor de temperatura NTC
What Is The NTC Temperature Sensor? NTC temperature sensor is an thermistor after the wire welding, encapsulate into a different probe and then use an epoxy seal. The temperature sensor retains all the features of the thermistor. After the optimization of the injection and cooling stages, will be made into a complete product, mass production is a continuous cycle of this processing step produced.
What is thermocouple sensor?
The appearance of various thermocouple sensor probes is often very different due to needs. Sin embargo, their basic structures are roughly the same, usually composed of main parts such as a thermode, an insulating sleeve protection tube, and a junction box, and are usually used in conjunction with display instruments, recording instruments and electronic regulators.