KSD301 10A 250V NC / NO Termostato Interruptor de temperatura Interruptor de control térmico

KSD301NC / NO (Normalmente abierto/normalmente cerrado) Clasificación eléctrica del interruptor de control térmico : 16Una CA de 125 V (Carga resistiva). 10Un termostato de 250 V CA. 16Una CA de 250 V. Temperatura de funcionamiento : 50 ~ 230 ℃ (UL.CUL 205℃). reacción bimetálica,termostar de reinicio automático, carcasa de termostato de plástico, soporte protector fijo. Fully encapsulated thermostat in industrial quality. Opens after reaching prescribed (action) temperatura. At lower temperature the thermostat is closed.

Termostato del interruptor de control de temperatura KSD301 150C N.C 250V 10A

KSD301 10A 250V Bimetal thermostat Normally Closed Temperature Switch Thermosta

Termostato térmico con Sensor de Control de interruptor de temperatura KSD301, pie zambo de 50°-160°

Descripción del Producto
KSD301 thermostat is a small temperature controller. Its working temperature performance is fixed, no adjustment is required, crisp, confiable, no arcing, larga vida útil, and less radio interference. It is mainly used in disinfection cabinets, botellas de agua electricas, cafeteras, electronic tile supports, hot water bags, dispensadores de agua, secadores de pelo, aspiradoras, calentadores electricos, hornos microondas, planchas electricas, secadoras de ropa, motors and other electrical appliances.

Current Ratinf(Y): 5A,10A,15A 16A;
Clasificación de voltaje(Ur):125V 250V ac;
Tf Tolerance: ±5℃
Intensidad eléctrica: AC2000V 50/60Hz
Resistencia de contacto: less than 50mΩ
Resistencia de aislamiento: more than 100MΩ
Velocidad de respuesta: ≤1℃/minuto
Life time: más que 30000 ciclos
Aprobaciones: UL TUV CQC

Temperatura de acción(tf) & Reset Temperature(Tr)

Dimension of KSD301 Bimetal Thermostat Temperature Switch Thermal control Switch

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, no bracket

KSD301 Temperature Control Switch Upright Terminal, no bracket

What’s the difference between NC and NO?
Normalmente cerrado: the thermostat is closed(connected) at normal status
Normalmente abierto: the thermostat is open(disconnected) at normal status

Please Note :
During installation, the switch should be completely fixed close to the mounting surface of the tested appliance.
Do not collapse or deform the plastic / metal shell during installation.
For metal temperature controller, do not remove the insulating sleeve to avoid electric leakage.
Not suitable for air temperature sensing, only applied to contact sensing.

Paquete estándar
100piezas por bolsa

Plazo de envío:
EXW, DDU, DDP, do&F, ENGAÑAR

Métodos de envío:
Expreso Internacional, En avión, Por mar