Tuoteryhmät
Tuotetunnisteet
panssaroitu termopari-anturi
terän sulakepidike
Auton terän sulake
Auton sulake
Keraaminen putken sulake
Katkaisija
Levytermostaatit
Ds18b20 lämpötila-anturi
sähkösulake
Nopea/hidas sulake
Sulakekotelon pidike
Lasiputken sulake
Inline sulakepidike
Limit Snap Disc -termostaatti
Pienet katkaisijat
Moottorin ylikuormitussuoja
Moottorin lämpösuojaus
NTC anturi
NTC termistori anturi
PCB-asennettava sulakepidike
PPTC nollattava sulake
PT100 lämpötila-anturi
PTC termistori
anturin liittimen johtosarja
Anturin anturit & Kaapelit
Hitaasti palava mikrosulake
Pinta-asennettavat sulakkeet
Temp Cutoff -linkki
Lämpötilan säätökytkin
Lämpötilasulake
Lämpösensori
Lämpötila-anturin kaapeli
Lämpötila-anturi
lämpötilakytkin
Lämpökatkaisu
Lämpökatkaisukytkin
Lämpösulake
lämpösuoja
Lämpökytkin
Termistori anturin anturi
Bimetal KST Heating Thermostat for Electric Heater Temperature Control Switch
Bi-Meta Thermostat KST Temperature Control Switch with setting temperature 60°C~250°C load capacity 16A/250VAC. Bi-Metal Line Voltage Thermostat is designed to regulate precise temperature in commercial, teollinen, and agricultural settings. Widely used in Elextric Heater, Electric Iron, Fryer, Rice Cooker, Toaster, Fat fryer, Warm electric light, Oven and so on.
Luokat: Lämpökytkin, termostaatti
Tunnisteet: Lämpötilan säätökytkin, Lämpökatkaisukytkin, lämpösuoja, Lämpökytkin
Bi-Meta Thermostat KST Temperature Control Switch with setting temperature 60°C~250°C load capacity 16A/250VAC. Bi-Metal Line Voltage Thermostat is designed to regulate precise temperature in commercial, teollinen, and agricultural settings. Widely used in Elextric Heater, Electric Iron, Fryer, Rice Cooker, Toaster, Fat fryer, Warm electric light, Oven and so on.
Name: | Adjustable Bimetal Thermostat KST 10A 16A 250V | Model: | KST- A,B,C,D,R |
Agency Approvals: | UL&CUL ,TUV, CQC | Operating Temperature: | 260℃ Max |
Tolerance: | ±5℃,±10℃ (customizable) | Reset Temp: | 10℃ To 30℃ (customizable) |
Contact Resistance: | Less Than 50mΩ | Hi-Pot Test: | 1500vac 0.5mA 1min |
Endurance: | 100,000 Cycles | Insulation Resistance: | > 10MΩ |
Ratings: | 125V~ 15A 250V~ 16A | Type: | Adjustable |
High Light: | KST A Bimetal Temperature Switch, CQC UL TUV 10A / 16A Bimetal Thermostat |
Description Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Rice Cooker
KST series adjustable thermostat is designed for High- power loading appliance with maximum current of 16A. Thermostat is operating by sensing ambient heat and the heat transmit through the metal mounting plate. It has various mounting design customized for different appliance upon requirements. Widely used in fan heater, uuni, and convection heater.
Features Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
* Stable performance
* Adjustable temperature
* High temperature control accuracy
* High reliability
* Long life
* Less interference with radio.
Dimensions Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer (mm)
1 | Metal Bracket |
2 | Block Plate |
3 | Ceramic Tube |
4 | Turning Shaft |
5 | Stud Screw |
6 | Terminal Tab |
7 | Upper Spring Sheet/Connect Sheet |
8 | Lower Spring Sheet/Calefaction Sheet/Mica Washer |
9 | Thin Ceramic Pin/Calefaction Sheet |
10 | Bi-metal |
11 | Fixed Contact |
12 | Moving Contact |
13 | Contact Plate |
14 | Ceramic Pin |
15 | Rivet |
16 | Ceramic |
17 | Mounting Plate |
Applications Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
KST series temperature switch, KST – A, KST – B – C, KST – D and KST – R.
KST series temperature switch is mainly applied to grill, sähkösilitysrauta, fan heater, oil heater, simmer pot,
frying pan and protection circuits.
Standard Ratings Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
UL&CUL | 125V AC 15A |
TUV | 250V AC 10A/16A |
CQC | 250V AC 10A |
Operating Life: | |
UL&CUL | 100000 cycle |
TUV | 100000 cycle |
CQC | 10000 cycle |
Max. Ambient Temperature | T250 oC |
Temperature Control Range | 60~250°C |
Temperature Control Precision | + 10 oC |
ON~OFF Difference | 10~40 oC, |
length of tune up shaft | can design depending on demand |
Hi-pot | 2000V AC 1 minute |
Approval | UL&CUL TUV CQC ROHS |
PRODUCT ADVANTAGES Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
● The structure and size of the mounting plate can be changed according to the actual situation of the customer;
● The terminal can be screwed or fast-connected according to customer’s requirements. The position of the terminal can also be changed according to the actual situation.
● The dimensions in parentheses are variable according to the actual situation. The drawings are for reference only.
INSTALLATION AND DIRECTION FOR USE Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
1. Grounding method: Connected to the grounding metal parts of the equipment through the metal casing of the thermostat.
2. The thermostat shall be operated in a general indoor environment where the relative humidity of the air is not more than 90%, no corrosive gas, no flammable gas and conductive dust.
3. When the temperature controller is in contact with the temperature, the cover should be placed close to the heat-generating part of the controlled appliance, and the thermal surface of the cover should be coated with thermal grease or other similar heat-conducting medium.
4. When the temperature controller is exposed to liquid or steam, it is recommended to use a stainless steel cover and a reliable leak-proof measure to prevent liquid from seeping into the insulation of the thermostat.
5. It is not possible to collapse or deform the top of the cover to avoid changes in operating temperature or other properties.
6. Do not allow liquid to penetrate inside the thermostat! The housing must be protected from excessive forces to prevent cracking; the housing should be kept clean to prevent contamination of conductive materials to prevent short-circuit breakdown due to reduced insulation.
7. The terminal cannot be bent during use, otherwise the reliability of the electrical connection will be affected.
Ota yhteyttä
Sähköpostiasi odotellessa, vastaamme sinulle sisällä 12 tuntia arvokasta tietoa, jota tarvitset.
LIITTYVÄT TUOTTEET
Bimetal Overload Thermal Protection for Three /Single Phase AC/DC Motor
Hi-Amp motor bimetal overload thermal protection switch are installed in motor circuits, and the current going to the motor passes through the bimetallic tripping element. The most salient feature of 17AM / KSD9700 / TB / 6AP/ 3MP/ 5AP series thermal overload switch / motor thermal protection switch is small volume and large current carrying capacity.
China Custom Limit Disc Thermostat Control Switches Therm o-Disc
Snap Disc, or 3/4" Limit switch thermostats (KSD301/KSD302/KSD304/KSD308) are bimetal mechanical thermostats that function via the thermal expansion and contraction of a bimetal disc that “snaps” from a convex to a concave shape at a set temperature. carrying up to AC 110V/400V, 10A-60A amps-240 Volts, Action mode: automatic reset, manual reset (normally open/normally closed).
JUC-31F/KSD-01F/67F040 Temperature Switch TO220 bimetal thermal Control Thermostat
JUC-31F/KSD-01F/67F040 Temperature Switch (Normally Opened) TO220 plug-in bimetal thermal Control Thermostat for Testers Cooling Air Conditioning. JUC 31F Series TO-220 PCB-Bimetal Disc Thermostat meets RoHs standards. As a snap action SPST bimetallic thermostat, it gives accurate regulation for one device.
Motor thermal protector
A temperature control switch using a bimetallic sheet as a temperature sensing element:
Motor thermal protector KSD9700, 8AM, 3MP, 6AP, 5AP, 2MP series products are a thermostat that uses a bimetallic sheet as a temperature sensing element. When the electrical appliance is working normally, the bimetallic piece is in a free state and the contacts are in a closed/open state.