Tuoteryhmät
Tuotetunnisteet
panssaroitu termopari-anturi
terän sulakepidike
Auton terän sulake
Auton sulake
Keraaminen putken sulake
Katkaisija
Levytermostaatit
Ds18b20 lämpötila-anturi
sähkösulake
Nopea/hidas sulake
Sulakekotelon pidike
Lasiputken sulake
Inline sulakepidike
Limit Snap Disc -termostaatti
Pienet katkaisijat
Moottorin ylikuormitussuoja
Moottorin lämpösuojaus
NTC anturi
NTC termistori anturi
PCB-asennettava sulakepidike
PPTC nollattava sulake
PT100 lämpötila-anturi
PTC termistori
anturin liittimen johtosarja
Anturin anturit & Kaapelit
Hitaasti palava mikrosulake
Pinta-asennettavat sulakkeet
Temp Cutoff -linkki
Lämpötilan säätökytkin
Lämpötilasulake
Lämpösensori
Lämpötila-anturin kaapeli
Lämpötila-anturi
lämpötilakytkin
Lämpökatkaisu
Lämpökatkaisukytkin
Lämpösulake
lämpösuoja
Lämpökytkin
Termistori anturin anturi
Custom KSD302 Hi-Amp 3/4″ Snap Action Bimetal Disc Thermostat
Luokat: Lämpökytkin, termostaatti
Tunnisteet: Levytermostaatit, Lämpötilan säätökytkin, Lämpökatkaisukytkin, Lämpökatkaisu, Lämpökytkin
The KSD302 / KSD308 Snap action bimetal 3/4” Disc thermostat from YAXUN Electric is a versatile, cost effective design. The snap action of the temperature sensing bimetal disc provides high speed contact separation resulting in resulting in high life characteristics at loads of 25A ~ 60 Amp @ 250 VAC.
120°F Close On-Rise (Normally Open) 3/4” KSD302 Disc Thermostat
The circuit will CLOSE when the temperature reaches 120 °F (± 5 °F), typically turning something on, and the circuit will OPEN when the temperature falls to 100°F (± 5 °F), typically turning something off.
These direct sensing thermostats are larger than standard thermostats, giving them an even more powerful bimetallic disc and a higher electrical rating (25A ~ 60 Amp). They are ideal for use with heating and air conditioning systems as well as with industrial equipment.
KSD302 Designed for maximum airflow around the thermostat to give quick and accurate response.
KSD302 Featuring a bimetallic, temperature-sensitive disc for snap-action in opening and closing the switch contacts. The bimetallic 3/4” disc is thermally and electrically insulated from the electrical circuit, eliminating self-heating effects. Only the temperature of the controlled equipment causes the switch to actuate.
Switch operation is rapid and positive due to the characteristics of the bimetallic 3/4” disc and the wiping action of the current-carrying contacts. Contact chattering is virtually eliminated, as is false cycling and sparking.
Electric Ratings:
25AMP @ 250Vac
60AMP@400V
Applications For Thermostat:
Water Heater bimetal Thermostat
Dishwasher bimetal Thermostat
Boilers bimetal Thermostat
Clothes Dryer bimetal Thermostat
Industrial Heater bimetal Thermostat
Washing Machine bimetal Thermostat
Air-conditioning bimetal Thermostat
HVAC bimetal Thermostat
Welding Machine bimetal Thermostat
250VAC KSD302 3/4″ Snap Action Bimetal Disc Thermostat For Electric Welding Machine
Kuvaus
Voltage Current: | 250v 2a To 60a | Temperature Range: | 50 To 180C |
Life Times: | 50000 Times | Use For: | Electric Welding Machine |
Product Name: | KSD302 Bimetal Thermostat | Current: | 10A/15A/16A |
Reset Type: | Auto-reset And Manual-reset | Rated Voltage: | 250VAC |
Rated Current: | 10A/16A | ||
High Light: | Electric Welding Machine KSD302 Thermostat, KSD302 3/4″ Snap Action Bimetal Disc Thermostat |
50 to 180C KSD302 3/4″ Snap Action Bimetal Disc Thermostat Electric Welding Machine
KSD302 Hi-Amp temperature protector’s Principle and structure
KSD302 series 3/4″ Snap Action Bimetal Disc Thermostat, is to bring the double shell fully enclosed metal contact temperature type temperature relay, according to heat bilges cold shrink principle make sheet metal bending, to set off the temperature, temperature drop can be manually reset after, on electric up security role.
KSD302 large current 3/4″ Snap Action Bimetal Disc Thermostat specification
(1) Function: temperature protection and overheating protection, prevent dry heating
(2) The electrical characteristics: AC250V ~ 400 V / 15 A ~ 60 A
(3) the highest environment temperature: 180 °C
(4) working temperature range: 0 °C ~ 250 °C (valinnainen). Temperature tolerance: ± 5
(5) Normal headscarf insulation resistance: > 100 M Ω
(6) normal contact resistance: more than 100 m Ω
(7) service life: > 50000 kertaa
Application of KSD302 3/4″ Snap Action Bimetal Disc Thermostat
(1) Electric welding machine, electric
(2) Electric equipment,
(3) Electric products,
(4) Steam heater
(5) High power machinery equipment
(6) Demand Water Heaters
Attention of KSD302 3/4″ Snap Action Bimetal Disc Thermostat
(1) By using the contact temperature type when installed, should make metal cap surface adhere is accused of mounting surface of the appliance.
(2) When installation shall not cover surface pressure deformation, lest affect performance.
(3) To prevent leakage, when using, can’t let the fluid infiltration within the thermostat, lest affect electric reliability.
(4) This product for bipolar type wiring way, when using, according to mark symbol, correct connection.
The product should be a headscarf in relative humidity is less than 90%, the environment temperature below 40 ℃ ventilation, clean, dry, no corrosive gas storage in the warehouse.
CODE | OPEN TEMP | RESET TEMP | CODE | OPEN TEMP | RESET TEMP | |
45 | 45±5°C | ≥33°C | 140 | 140±5°C | 100±15°C | |
50 | 50±5°C | ≥35°C | 145 | 145±5°C | 100±15°C | |
55 | 55±5°C | 42±6°C | 150 | 150±5°C | 105±15°C | |
60 | 60±5°C | 45±8°C | 155 | 155±5°C | 110±15°C | |
65 | 65±5°C | 48±10°C | 160 | 160±5°C | 115±15°C | |
70 | 70±5°C | 50±12°C | 165 | 165±5°C | 120±15°C | |
75 | 75±5°C | 53±14°C | 170 | 170±3°C | 155±5°C | |
80 | 80±5°C | 55±15°C | 175 | 175±5°C | 130±15°C | |
85 | 85±5°C | 60±15°C | 180 | 180±5°C | 135±15°C | |
90 | 90±5°C | 65±15°C | 185 | 185±5°C | 140±15°C | |
95 | 95±5°C | 70±15°C | 190 | 190±5°C | 145±15°C | |
100 | 100±5°C | 70±15°C | 195 | 195±5°C | 150±15°C | |
105 | 105±5°C | 75±15°C | 200 | 200±5°C | 155±15°C | |
110 | 110±5°C | 75±15°C | 205 | 205±5°C | 160±15°C | |
115 | 115±5°C | 80±15°C | 210 | 210±5°C | 165±15°C | |
120 | 120±5°C | 85±15°C | 215 | 215±5°C | 170±15°C | |
125 | 125±5°C | 85±15°C | 220 | 220±5°C | 175±15°C | |
130 | 130±5°C | 90±15°C | 225 | 225±5°C | 180±15°C | |
135 | 135±5°C | 95±15°C | 230 | 230±5°C | 185±15°C |
Ota yhteyttä
Sähköpostiasi odotellessa, vastaamme sinulle sisällä 12 tuntia arvokasta tietoa, jota tarvitset.
LIITTYVÄT TUOTTEET
Bimetal KST Heating Thermostat for Electric Heater Temperature Control Switch
Bi-Meta Thermostat KST Temperature Control Switch with setting temperature 60°C~250°C load capacity 16A/250VAC. Bi-Metal Line Voltage Thermostat is designed to regulate precise temperature in commercial, teollinen, and agricultural settings. Widely used in Elextric Heater, Electric Iron, Fryer, Rice Cooker, Toaster, Fat fryer, Warm electric light, Oven and so on.
China TO-220 Disc Thermostat Thermal Switch Supplier
China Custom TO-220 Thermal Cutoff Switch JUC-31F/ KSD-01F instead Airpax® 6700 series Subminiature Thermostat. JUC-31F/ KSD-01F is a RoHS compliant, positive snap action, single pole / single throw, a subminiature bimetallic thermostat that provides accurate and reliable sensing and switching in a single device.
JUC-31F/KSD-01F/67F040 Temperature Switch TO220 bimetal thermal Control Thermostat
JUC-31F/KSD-01F/67F040 Temperature Switch (Normally Opened) TO220 plug-in bimetal thermal Control Thermostat for Testers Cooling Air Conditioning. JUC 31F Series TO-220 PCB-Bimetal Disc Thermostat meets RoHs standards. As a snap action SPST bimetallic thermostat, it gives accurate regulation for one device.
Motor thermal protector
A temperature control switch using a bimetallic sheet as a temperature sensing element:
Motor thermal protector KSD9700, 8AM, 3MP, 6AP, 5AP, 2MP series products are a thermostat that uses a bimetallic sheet as a temperature sensing element. When the electrical appliance is working normally, the bimetallic piece is in a free state and the contacts are in a closed/open state.