Tuoteryhmät
Tuotetunnisteet
panssaroitu termopari-anturi
terän sulakepidike
Auton terän sulake
Auton sulake
Keraaminen putken sulake
Katkaisija
Levytermostaatit
Ds18b20 lämpötila-anturi
sähkösulake
Nopea/hidas sulake
Sulakekotelon pidike
Lasiputken sulake
Inline sulakepidike
Limit Snap Disc -termostaatti
Pienet katkaisijat
Moottorin ylikuormitussuoja
Moottorin lämpösuojaus
NTC anturi
NTC termistori anturi
PCB-asennettava sulakepidike
PPTC nollattava sulake
PT100 lämpötila-anturi
PTC termistori
anturin liittimen johtosarja
Anturin anturit & Kaapelit
Hitaasti palava mikrosulake
Pinta-asennettavat sulakkeet
Temp Cutoff -linkki
Lämpötilan säätökytkin
Lämpötilasulake
Lämpösensori
Lämpötila-anturin kaapeli
Lämpötila-anturi
lämpötilakytkin
Lämpökatkaisu
Lämpökatkaisukytkin
Lämpösulake
lämpösuoja
Lämpökytkin
Termistori anturin anturi
UMI TAM 250V 1A, 2A, 3A, 5A Ceramic Thermal Cutoff Fuse Link
Luokka: lämpösulake
Tunnisteet: Temp Cutoff -linkki, Lämpötilasulake, Lämpökatkaisu, Lämpösulake
UMI TAM temperature fuse is also called thermal fuse. It is a safety overheat protection component. It is generally installed in electrical products that are prone to heat. When the electrical appliance overheats and the temperature exceeds the abnormal temperature, the temperature fuse will automatically melt and cut off the power supply to prevent the electrical appliance from causing a fire. Under normal circumstances, the temperature fuse only serves as a power supply path in the circuit. If it does not exceed its rated value during use, it will not be melted and will not have any effect on the circuit. Only when the electrical product fails or produces abnormal temperature will it be melted to cut off the power circuit. This is different from the current fuse (nykyinen sulake), which melts due to the heat generated when the rated current is exceeded in the circuit.
Specifications
P/N | Tf
(℃) |
Ta
(℃) |
Th
(℃) |
Tm
(℃) |
Ir | Ur |
T0F | 76 | 72±3 | 55 | 200 | 1A | AC 250V |
T1F | 86 | 81±2 | 60 | 200 | 1A | AC 250V |
T2F | 102 | 98±3 | 75 | 200 | 2A | AC 250V |
T3F | 115 | 111±2 | 95 | 200 | 2A | AC 250V |
T4F | 127 | 123±2 | 110 | 200 | 2A | AC 250V |
T7F | 145 | 140±2 | 125 | 200 | 1A | AC 250V |
Temperature Rating (Tf):Rated opening temperature
Action Temprature (Ta): Actual measured opening temperature
Holding temperature (Th):Maximum temperature measured at the case end ofthe thermal cutoff at which the thermal cutoff can be maintained for a period for 168 hours without opening.
Maximum temperature (Tm):The maximum temperature at which a thermal cutoff can be maintained for10 minutes as an open circuit and can then be maintained at twice rated voltage for a period of 2 minutes during which its mechanical and electrical properties will not be impaired
Product Description
Item | lämpösulake, thermal cutoff, thermal link |
Brand | UMI |
P/N | T1F |
Lead Dia | 0.7mm |
Lead Length | 68+68mm |
Voltage Rating | 250V AC |
Current Rating | 1A |
Opening Temp | 86C |
Mounting Type | axial leaded |
Body Dia | 2mm |
Body Length | 6.3mm |
Certifications | UL cUL VDE CCC KC |
Dimension
Leads Type | Length(mm) | ||||
A | B | C | D | E | |
T-F | 6.3±0.3 | 2.0±0.1 | 2.3 | 0.53±0.05 | 68±3.0 |
T-F(C) | 6.3±0.3 | 2.0±0.1 | 2.3 | 0.53±0.05 | 38±3.0 |
Ota yhteyttä
Sähköpostiasi odotellessa, vastaamme sinulle sisällä 12 tuntia arvokasta tietoa, jota tarvitset.
LIITTYVÄT TUOTTEET
Emerson G4 / G5 series microtemp 10A / 20A thermal fuse
Emerson Group production MICROTEMP® G4 G5 series thermal fuse, According to different product specifications, Rated load current, respectively, up to AC250V 10A, AC120V 15A and DC24V 5A. To provide reliable protection against overheating, In the same industry products, MICROTEMP® G4 G5 series thermal fuse has established its flagship status can not be shaken.
SET Square TCO Thermal Fuse use Flat iron
A piece of fusible alloy wire is connected between the two pins of the thermal fuse, which is covered by a special transparent resin square shell. Current can flow from one pin to another. When the temperature around the thermal fuse rises to its set operating temperature, its fusible alloy wire melts and shrinks into a spherical shape, and is attached to the ends of the two pins with the help of surface tension and special resin. In this way, the circuit is permanently cut off.
Thermik paineenkestävä pyöreä lämpösuoja S01
Lämpötilakytkin (lämpösuoja) Tuottama THERMIK Company on pieni koko, erittäin korkea mekaanisen rasituksen kestävyys, korkea iskunkestävyys, ja erinomainen vakaus. PTC-termistorille on ominaista pieni koko, nopea vastaus, 4 suojakerroksia, ja 3 sarjaan kytketyt päät. Se voidaan upottaa moottorin kolmivaiheiseen kelaan ja se voi suojata eri lämpötiloja.