catégories de produits
- Fusible électrique 14
- Disjoncteur thermique 20
- Porte-boîte à fusibles 36
- Capteur de température 67
- Interrupteur thermique 64
- Fusible de voiture 19
- Fusibles boulonnés 7
- fusion thermique 32
- fusibles à montage en surface 12
- thermistance 22
- Porte-fusible à montage sur circuit imprimé 27
- Faisceau de câblage 6
- Porte-fusibles à lame 17
- thermostat 46
Mots clés du produit
Messages récents
Disjoncteur à réinitialisation automatique personnalisé en Chine avec boulon
Qu'est-ce qu'un disjoncteur à réinitialisation automatique? Fonctions et applications du disjoncteur:
Le disjoncteur à réinitialisation automatique utilise les caractéristiques d'action des bandes bimétalliques comme principe de fonctionnement du produit. Il est utilisé en courant nominal AC/DC 5-50A.; Tension d'entrée: norme 12 V CC; 125VCA/250VAC50-60HZ; circuits 24 V CC personnalisables qui doivent être protégés contre les surcharges ou les courants excessifs.
Qu'est-ce qu'un disjoncteur à réinitialisation automatique? Fonctions et applications du disjoncteur:
Le disjoncteur à réinitialisation automatique utilise les caractéristiques d'action des bandes bimétalliques comme principe de fonctionnement du produit. It is used in AC/DC circuits that need to be protected from overload or excessive current. When a short circuit to ground, or too much current flows through the circuit breaker, the contacts inside auto heat up and separate, interrupting the flow of electricity and protecting your circuit. E5 ATV Auto reset circuit breakers are commonly used to protect electrical wiring and components in 12 volt vehicles from short circuits and excessive current draw. They have been reliably used for decades as a replacement to costlier fuses and fusible link wires.
Connections to the E5 circuit breaker is made using the two #8 – 32 studs protruding from the face. One connection stud is for your power connection, and is labeled ‘BAT’. The other stud connection is labeled ‘AUX’, which is where you attach the electrical device you want to protect. The base of the short stop breaker comes in two mounting feet configurations, and also is available without mounting feet. E5 Auto reset circuit breakers operate in the following way – When a short circuit to ground, or too much current flows through the breaker, the contacts inside heat up and separate, interrupting the flow of electricity and protecting your circuit. When the short stop breaker cools, the electrical contacts inside will re-connect, thereby automatically resetting the circuit breaker. If the short circuit or over current condition still exists, the breaker will trip again and repeat the cycle. One of the most common circuit breakers found in automobiles, trucks, boats, équipement, and RV’s.
Product performance:
● Rated current 5-50A;
● Input voltage: norme 12 V CC; 125VCA/250VAC50-60HZ; customizable 24VDC
● Withstand voltage: 1500VAC/1min, leakage current ≤0.5mA;
● Insulation resistance: 500VDC1Min≥100MΩ;
● Rated short-circuit capacity: 2500A@12VDC;
● Reset mode: E511, E512, E513; E516, E517, E518 automatically reset T1;
● Reset mode for other products: E521, E5122, E523 unplug the power to reset T2; E536, E537, E538 manually reset T3;
● The shell is a metal shell, colored zinc E511, E512, E513, indicating that T1 automatically resets;
● The other is blue zinc, E521, E5122, E523, indicating that T2 unplugs the power to reset.
The plastic shell is ultrasonically welded, with good airtightness and waterproof. The mounting aperture of the plastic shell can be freely selected according to needs: 5.1mm, 5.8mm, 6.7mm, etc..
There are three types of installation positions: no wings, horizontal wings, longitudinal wings, and single wings. Strong bolt selection: divided into #10-32 thread bolts (9.4mm, 14.2mm, 16.8mm), 250 bornes à fiche. The company can also customize according to customer needs.
● The E5 series has many sizes and specifications. Customers can further ask the business personnel for the “E5 product catalog”;
Action characteristics:
● Test environment temperature: 25±3℃, courant nominal 100%, no tripping within one hour; courant nominal 135%, trébucher 30 minutes; courant nominal 200%, trébucher 60 secondes;
Safety certification
● Meets SAE standard requirements.
● Meets EU RoHS environmental protection directive requirements.
● Meets EU REACH environmental protection directive requirements
Contactez-nous
En attente de votre email, nous vous répondrons dans les 12 heures avec des informations précieuses dont vous aviez besoin.