Chine Fournisseur de commutateur thermique de thermostat à disque TO-220

Chine Interrupteur de coupure thermique TO-220 personnalisé JUC-31F/ KSD-01F instead 6700 série Thermostat Subminiature. JUC-31F/KSD-01F est conforme à RoHS, action instantanée positive, unipolaire / lancer simple, un thermostat bimétallique subminiature qui fournit une détection et une commutation précises et fiables dans un seul appareil. The JUC-31F/ KSD-01F, 6700 series thermostat dimensionally conforms to the international product package standard Y220 / TO220.

6700 30-150Deg surcharge 250V 2A mini interrupteur thermique

KSD-01F 250V 2A Mini Bimetallic Thermostat Thermal Switch

KSD-01F Interrupteur de coupure thermique , Interrupteur de coupure thermique de type tactile

Thus, theJUC-31F / KSD-01F, 6700 may be automatically placed and soldered onto PC boards with high speed automated equipment, eliminating the need for the expensive hand placement and termination required today for most power supply thermostats.

JUC-31F / KSD-01F, 6700 Caractéristiques
RoHS compliant per EU directive 2002 / 95 / EC, UL, TUV;
TO-220 / Y-220 international electronic package standard;
Ideal for surface and air sensing on PC boards and heat sinks;
VDE approved with “P” bracket option;
Gold-plated contacts;
Up to 20,000 life cycles @ max standard amperage;
Up to 100,000 life cycles @ max gold contact amperage;

Résistance des contacts : 50 milliohms maximum (before and after rated life)
Contact Ratings : Cycles Voltage Amps (resistive); 20,000 48 VDC 0.5; 100,000 5 VDC 0.001 (gold).
Contact Operations : Either close on rise (make) or open on rise (break)
Température de fonctionnement : 40°C to 130°C (104°F to 266°F)
Temperature Tolerance : Standard of ±5°C (±9°F) with nominal operating temperature settings in 5°C increments
Short Term / Long Term Exposure Limit Short = 260°C (500°F), 10 second duration; Long = -55°C to 160°C (-67°F to 320°F)
Rigidité diélectrique : Nickel-plated copper bracket has 1480 VAC 60Hz, 1 second duration terminals to case. Plastic bracket has 2000 VAC 60Hz, 1 second duration terminals to case.
Insulation Resistance : 100 Mohms at 500 VDC
Contact Bounce : 3 milliseconds max (make)
Vibration : Per Mil-Std-202, method 204D, test condition D, 10 à 2,000 Hz
Shock : Per Mil-Std-202, method 213, test condition C, 100 G’s for 6 millisecond duration, 1⁄2 sine wave
Seal : High temperature epoxy sealed for wave soldering and cleaning, moisture proof per Sensata specification S-722 (unit will not leak while submerged in 9” of water for a minimum of two minutes)
Base Material : PPS (Polyphenylene Sulfide), 94 VO rated
Terminal Material : 65% Cuivre, 18% Nickel
Contact Material : Gold-plated or overlay, silver crossbar
Mounting Bracket Material : Nickel-plated copper bracket has 1480 VAC 60Hz, 1 second duration terminals to case. Plastic bracket has 2000 VAC 60Hz, 1 second duration terminals to case.
Chemical Resistance : Unit is resistance to water, salt, alcool, ammoniac, trichlorethane and most other organic solvents
Solderability : Terminal material is selectively striped with lead-free solder for improved solderability
Soldering Heat Resistance : Per Mil-Std-202G, method 210F, test condition C & K, test condition K validated at 260°C for 25 seconds
Weight : Approximately 0.5 grams
Agency Approvals : cЯUus recognized E36687
VDE approval 0631/12.83 : RoHS Compliant per EU Directive 2002/95/EC

Taper:	Switch Snap Action	Application:	PCB,power Suppl
Supplier Type:	Original Manufacturer	Cross Reference:	KSD-01F, KSD-05F
Media Available:	Datasheet, Photo, EDA/CAD Models	Type de contact:	D For Normally Closed & H For Normally Open
Écart de température:	±3°C / ±5°C / ±7°C	Cycle de vie:	10000fois
Quantité minimale de commande:	1000PC	Mode de paiement:	TT ou négocier les conditions de paiement
Délai de livraison:	7 À 15 Jours ouvrables	Modèle:	JUC-31F
Matière première:	Mèche, Cuivre, Plastique, Métal, Aluminium	Évaluation électrique:	AC250V / 5UN;AC250V 10A; AC125V / 8UN
Plage de température d'action:	0~130℃ (one Step For Every 5°C)
Souligner:	Bimetallic Thermostat Switch for PCB, 2A Bimetallic Thermostat Mini Thermal Switch

Mini Bimetallic Thermostat Thermal Controller Switch JUC-31F 250V 2A 0 À 130 Degree

Évaluation électrique	AC250V / 5UN;AC250V 10A; AC125V / 8UN
Plage de température	0~130℃ (one step for every 5°C)
Différence de température de récupération et d’action	Diminution de la température de fonctionnement de 15 à 45°C
Écart de température	±3°C / ±5°C / ±7°C
Résistance des circuits	≤50mΩ (Valeur initiale)
Résistance d'isolation	≥100 mΩ (État normal DC500V)
Rigidité diélectrique	CA 50 Hz 1 500 V / min, pas de panne aveuglante (État normal)
Cycle de vie	10000 fois
Type de contact	D for Normally closed & H for Normally open
Délai de livraison	7 à 15 jours ouvrables
Quantité minimale de commande	1000PC
Mode de paiement	TT ou négocier les conditions de paiement
Délai de livraison	7 à 15 jours ouvrables
Quantité minimale de commande	500PC
Champ d'application	JUC-31F thermostat is applicable to Electric equipment, electric product, household appliance, the protection of temperature control, thermal overload in circuit board, Communication power supply , switching power supply,UPS power supply, medical power supply, fire power ,the module power supply ,audio amplifier equipment, various types of rechargeable devieces, rectifiers, inverters, welding equipment ,aerospace instrumentation electronic equipment , automation equipment ,military, Commercial product temperature control or temperature protection.

6700 TO220 Thermostat Thermal Switch Dimensions

1. JUC-31F thermostat’s Principle and structure
The product is a sensor of belonging to touch-type plastic Snap temperature thermostat ,the adoption of international TO220/Y220 standard package ,the product has high reliability ,sensitive and accurate ,petite taille ,poids léger ,very easy to install and so on , very suitable for PCB circuit board / heat equipment/ power device installed Specification
2. JUC-31F thermal protector’s Specification
2.1. Contact load: AC 120V 1A; DC48V 1A; AC 220V 1.5A/3A; DC 24V 1.5A/3A
2.2. Type de contact : D for normally closed type; H for normally open type
2.3. Temperature

Operating temperature/°C	Recovery temperature/°C(lower than Operating temperature)	Error	Testing way (Speed of temperature rise and fall)
0~99	5~35	±3°C	1°C/min
100~130	7~40	±5°C	1°C/min

2.4. Overheating temperature:250 degrés
2.5. Contact resistance: less than 50mΩ
2.6. Résistance d'isolation : more than 100 mΩ
2.7. Dielectric withstand voltage: more than 1500V
2.8. Product life: more than 10000 fois
2.9. Weight:1.7 g
2.10. Action temperature deviations:+-5 degrés
3. The drawing of JUC-31F