catégories de produits
- Capteur de température 32
- Interrupteur thermique 58
- Fusible de voiture 19
- Fusibles boulonnés 7
- fusion thermique 29
- fusibles à montage en surface 12
- thermistance 2
- Porte-fusible à montage sur circuit imprimé 27
- Faisceau de câblage 1
- Porte-fusibles à lame 17
- thermostat 34
- Fusible électrique 14
- Thermal Circuit Breaker 20
- Porte-boîte à fusibles 36
Mots clés du produit
capteur à thermocouples blindé
blade Fuse Holder
Fusible de lame de voiture
Fusible de voiture
Fusible à tube en céramique
Disjoncteur
Thermostats à disque
Capteur de température DS18B20
Fusible électrique
Fusible à fusion rapide/lente
Porte-boîte à fusibles
Fusible en tube de verre
Porte-fusible en ligne
Limit Snap Disc Thermostat
Mini Circuit Breakers
Protecteur de surcharge du moteur
Protection thermique du moteur
Capteur CTN
Capteur à thermistance NTC
Porte-fusible à montage sur circuit imprimé
Fusible réinitialisable PPTC
Capteur de température PT100
Thermistance PTC
faisceau de connecteur de capteur
Sondes de capteur & Câbles
Micro-fusible à soufflage lent
Fusibles à montage en surface
Lien de coupure de température
Interrupteur de contrôle de la température
Fusible de température
Capteur de température
Câble du capteur de température
Sonde de capteur de température
interrupteur de température
Coupure thermique
Interrupteur de coupure thermique
Fusion thermique
protecteur thermique
Interrupteur thermique
Sonde de capteur de thermistance
Thermal Cut-Off (TCO) is an overheat protection component. When the temperature inside the device or system exceeds the preset safety value, the TCO disconnects the circuit to prevent damage to the device or fire. This type of fuse is often used in electronic equipment, automobiles, and industrial equipment to provide additional safety. This article summarizes the working principle, structural characteristics, process flow, selection parameters, and design considerations of the thermal fuse.
Notes on the installation of thermal fuse:
1. When using lead bending, it should be bent from a part more than 6 mm from the root; When bending, do not damage the roots and leads, and do not pull, press, or twist the leads forcibly.
2. When the thermal fuse is fixed by screws, riveting or binding posts, it should be able to prevent mechanical creep and poor contact.
3. The connecting parts should be able to work reliably within the working range of the electrical product without displacement due to vibration and shock.
4. When welding the lead wire, the heating humidity should be limited to a minimum, and no high temperature should be applied to the thermal fuse; Do not forcibly pull, press, or twist thermal fuses and leads; After welding, it should be cooled for more than 30 seconds immediately.
5. The thermal fuse can only be used under the conditions of the specified rated voltage, current and specified temperature. Pay particular attention to the maximum continuous temperature that the thermal link can withstand.
Note: Nominal current, lead length and temperature can be Designed according to customer requirements.
N-F Series
Thermal Fuse Features
Fusing temperature thermal fuse accurate, high withstand voltage, petite taille, and temperature resistance.
Belonging unrecoverable type thermal fuses. Temperature fuse melting off, even if the surrounding temperature falls, it will not be turned on.
Use insulating housing.
No lead (Pb) and cadmium (Cd), and comply with RoHS.
REACH does not contain the specified 46 categories SVHC (SVHC).
Thermal Fuse Size
Cable length | Dimensions (mm) | ||||
UN | B | C | D | E | |
Standard N-F | 4.1±0.1 | 5.2±0.1 | 2.0±0.1 | 0.53±0.05 | 36±3.0 |
Long N-F(L) | 4.1±0.1 | 5.2±0.1 | 2.0±0.1 | 0.53±0.05 | 68±3.0 |
Model | Rated temperature Tf(℃) |
Operating temperature (℃) |
Rated current (A) |
Rated voltage (V) |
maintaining the temperature Th(℃) |
Maximum temperature limit Tm(℃) |
N06F | 65 | 61±3 | 1.0 | AC250 | 50 | 200 |
N0F | 76 | 72±3 | 1.0 | AC250 | 50 | 200 |
N1F | 86 | 81±2 | 1.0 | AC250 | 60 | 200 |
N2F | 102 | 98±3 | 1.0 | AC250 | 75 | 200 |
N3F | 115 | 111±2 | 1.0 | AC250 | 95 | 200 |
N4F | 127 | 123±2 | 1.0 | AC250 | 105 | 200 |
N13F | 133 | 129±3 | 1.0 | AC250 | 105 | 200 |
N5F | 136 | 131±2 | 1.0 | AC250 | 100 | 200 |
N6F | 139 | 134±2 | 1.0 | AC250 | 110 | 200 |
N7F |
Contactez-nous
En attente de votre email, nous vous répondrons dans les 12 heures avec des informations précieuses dont vous aviez besoin.
PRODUITS CONNEXES
Dispositifs de coupure thermique à résistance mécanique (Série DF SF 10 ampères)
Ensuite, la tension entre les contacts du coupe-circuit thermique et le circuit DC augmente pour garantir que le circuit DC est déconnecté. Grâce à la présente invention, le problème selon lequel la coupure thermique dans le circuit CC ne peut pas couper efficacement le circuit est résolu, et l'effet d'amélioration de la sécurité du circuit est obtenu.
Le fusible thermique carré TCO SET utilise un fer plat
A piece of fusible alloy wire is connected between the two pins of the thermal fuse, which is covered by a special transparent resin square shell. Current can flow from one pin to another. When the temperature around the thermal fuse rises to its set operating temperature, its fusible alloy wire melts and shrinks into a spherical shape, and is attached to the ends of the two pins with the help of surface tension and special resin. In this way, the circuit is permanently cut off.