catégories de produits
- thermistance 1
- Porte-fusible à montage sur circuit imprimé 27
- Faisceau de câblage 1
- Porte-fusibles à lame 17
- thermostat 34
- Fusible électrique 14
- Thermal Circuit Breaker 20
- Porte-boîte à fusibles 36
- Capteur de température 30
- Interrupteur thermique 58
- Fusible de voiture 19
- Fusibles boulonnés 7
- fusion thermique 29
- fusibles à montage en surface 12
Mots clés du produit
capteur à thermocouples blindé
blade Fuse Holder
Fusible de lame de voiture
Fusible de voiture
Fusible à tube en céramique
Disjoncteur
Thermostats à disque
Capteur de température DS18B20
Fusible électrique
Fusible à fusion rapide/lente
Porte-boîte à fusibles
Fusible en tube de verre
Porte-fusible en ligne
Limit Snap Disc Thermostat
Mini Circuit Breakers
Protecteur de surcharge du moteur
Protection thermique du moteur
Capteur CTN
Capteur à thermistance NTC
Porte-fusible à montage sur circuit imprimé
Fusible réinitialisable PPTC
Capteur de température PT100
Thermistance PTC
faisceau de connecteur de capteur
Sondes de capteur & Câbles
Micro-fusible à soufflage lent
Fusibles à montage en surface
Lien de coupure de température
Interrupteur de contrôle de la température
Fusible de température
Capteur de température
Câble du capteur de température
Sonde de capteur de température
interrupteur de température
Coupure thermique
Interrupteur de coupure thermique
Fusion thermique
protecteur thermique
Interrupteur thermique
Sonde de capteur de thermistance
Thermik Pressure Resistant Round Thermal Protector S01
The temperature switch (protecteur thermique) produced by THERMIK Company is characterized by its small size, extremely high mechanical stress resistance, high shock resistance, and excellent stability. PTC thermistor is characterized by small size, fast response, 4 layers of protection, et 3 heads connected in series. It can be buried in the three-phase coil of the motor and can protect different temperatures.
The PTC thermistors and thermal protectors produced by the German THERMIK company are stable products successfully developed in 1968. It enjoys a high reputation in the international market and is recognized as an excellent choice for protecting motors, transformateurs, ballasts, power tools, etc.. The temperature switch (protecteur thermique) produced by THERMIK Company is characterized by its small size, extremely high mechanical stress resistance, high shock resistance, and excellent stability. PTC thermistor is characterized by small size, fast response, 4 layers of protection, et 3 heads connected in series. It can be buried in the three-phase coil of the motor and can protect different temperatures. It can also protect key parts such as motor bearings and lubricants; in this field, THERMIK represents high quality, reliability and durability. Tempertur (TPQE): Thermik's first agent/rare distributor/first-level agent/authorized sales in China.
ST01 series temperature switch
Product advantages:
• Same thermal protection function, low price
• Obtained UL and TUV certification, breaking Germany's 30-year monopoly on temperature switches.
• Good airtightness, which can prevent product failure during the vacuum dipping process.
• Small size, suitable for being buried inside the coil.
• Metal shell, can withstand 50KG coil shaping pressure, has good thermal conductivity, and is sensitive to temperature.
• Pure temperature products, the current does not flow through the bimetal, no current heating effect, accurate temperature control.
technology:
• Integrate global supply chain resources, and the bimetallic sheet uses materials from the world's largest manufacturer, the United States EMS. The shell adopts the stamping and forming technology of German supplier.
• The reed is made of Japanese NGK material, which is processed and produced by Japanese stamping parts suppliers.
• The shell and reed are silver-plated, which greatly reduces the contact resistance.
• The core components of the two pieces adopt fully automated molding equipment and temperature screening tunnel kiln production testing, with good consistency and stable performance.
Technical Parameters
With insulation sleeve | S01 | |
1 | Contact type | Usually closed |
2 | Rated switching temperature (NST) every 5 ℃ | 60-200℃ |
3 | Standard tolerance | ±5K |
4 | Reset temperature range according to UL / CSA at rated switching temperature | 30K±15K |
5 | Applied voltage ... AC ... / DC | ...500V ~/...100V= |
6 | Rated voltage, AC | 250V|500V |
7 | Rated current, alternating current cosφ = 1.0 | 2.5UN|0.75UN |
8 | Rated current, alternating current cosφ = 0.6 | 1.6UN|0.50UN |
9 | Number of switches in In and Un conditions | 10.000 |
10 | Current sensitivity in In | No |
11 | Maximum switching current at 250V ~ / number of switching | 5.0A/2000 |
12 | Contact bounce time | < 1ms |
13 | Contact resistance (refer to MIL-Stand, R5757) | < 50mΩ |
14 | Impregnation resistance (according to Thermik test) | Fit |
15 | Vibration resistance at 10-60Hz | 100m/s2 |
16 | Casing pressure stability (special test to maximum) | 450N(45kg) |
17 | High voltage insulation (no C type) | 2 kV |
18 | Protection level | I |
19 | Standard connection | lead 0.25mm2 |
20 | Diameter d (with / without insulation sleeve) | 9.4/9.0mm |
21 | Height h (with / without insulation sleeve) | 4.8/4.3mm |
22 | Insulation sleeve length | 16mm |
23 | Screw / -length | - |
24 | Wrench size / maximum torque | - |
25 | Approved according to safety design | VDE.UL.BEAB.CSA.SEMKO |
AGENCY FILE NUMBER STANDARD NUMBER APPLICATION
UL E305764 873 Motor protection
VDE 40016121 EN60730-2-2 Motor protection
TUV R50109800 EN60730-2-3 Lighting Protection
TUV R50110965 EN60730-2-9 Thermal cut-out
CB CN5785 IEN60730-2-2 Motor protection
CQC CQC05002013372 GB14536.1 GB14536.3 Motor protection Limit and regulating controls
Contactez-nous
En attente de votre email, nous vous répondrons dans les 12 heures avec des informations précieuses dont vous aviez besoin.
PRODUITS CONNEXES
250v 2a /10a Lien à coupure thermique pour ventilateur de table/mixeur
Le fusible thermique peut détecter la surchauffe générée par un fonctionnement anormal des produits électriques et électroniques, coupant ainsi le circuit pour éviter un incendie. Couramment utilisé dans: sèche-cheveux, fers à repasser électriques, cuiseurs à riz, cuisinières électriques, transformateurs, moteurs, distributeurs d'eau, cafetières, etc.. Le fusible thermique ne peut plus être utilisé après l'opération, et ne fonctionne qu'une seule fois à la température de fusion.
Dispositifs de coupure thermique à résistance mécanique (Série DF SF 10 ampères)
Ensuite, la tension entre les contacts du coupe-circuit thermique et le circuit DC augmente pour garantir que le circuit DC est déconnecté. Grâce à la présente invention, le problème selon lequel la coupure thermique dans le circuit CC ne peut pas couper efficacement le circuit est résolu, et l'effet d'amélioration de la sécurité du circuit est obtenu.
Tamura/NEC SF metal casing 15A Temperature fuse
The working principle of the AUPO / Tamura / NEC SF thermal fuse is based on the thermal expansion and conductive properties of the material. When the temperature in the circuit rises to the rated trigger temperature of the fuse, the metal material of the fuse will expand due to heat. When this expansion reaches a certain degree, it will cause the resistance inside the fuse to rise sharply.
Thermal Fuse Function and Application
The Thermal Fuse (Thermal Cutoff, Fusible de température) is Axial / Radial / Organic Thermal-Link(OTCO) safety parts that stops the flow of electricity to the motor circuit when a overheats. If the fuse is missing or broken, your motor will not start. The thermal fuse is sensitive to external temperature, and the operating temperature is accurate and stable. Petite taille, structure scellée. Performances fiables. Low resistance value. Une action unique coupe le courant, and the current interruption capacity reaches 250VAC/25A.