15Egy 16A 250V hőmérsékletű biztosíték, leválasztó kapcsolat kábelköteggel

A Temp fuse Cutoff Linket hőbiztosítéknak is nevezik (GB9816.1-2013), amely egy hőmérséklet-érzékelő áramkör megszakító berendezés. The Temp fuse Cutoff Link can sense the overheating generated by the abnormal operation of electrical and electronic products, thereby cutting off the circuit to avoid fire. Commonly used in: hajszárítók, elektromos vasalók, rizsfőzők, electric stoves, transzformátorok, motors, water dispensers, coffee pots, stb. The Temp fuse Cutoff Link cannot be used again after operation, and only operates once at the fuse temperature.
It consists of a movable contact (sliding contact), a spring (spring), and a fusible (electrically nonconductive thermalpellet). Before the temperature fuse is activated, the current flows from the left lead to the movable contact (sliding contact), and flows to the right lead through the metal shell. When the external temperature reaches the predetermined temperature, the organic fusible melts and the compression spring becomes loose. That is, the spring expands, and the movable contact (slidingcontact) is separated from the left lead. The circuit is opened, and the current between the movable contact (sliding contact) and the left lead is cut off.

15Egy 16A 250V hőmérsékletű biztosíték, leválasztó kapcsolat

Temp Cutoff fuse crimping terminal wire assembly

Hőmérséklet-biztosíték Lezárási összeköttetés a kábelszerelvény szállítójával

Thermal fuses have different functions depending on the product they are packaged in. Fuses made of special materials can protect circuits from overheating, vagyis, hőbiztosítékok, also known as thermal fuses. Thermal fuses cut off circuit devices through temperature sensing, and can sense whether the electronic products of electrical equipment are overheating during abnormal operation, and cut off the circuit to avoid fire. What if you don’t know much about thermal fuses? Next, let’s see how to install and use them.
The steps of the thermal fuse installation method are explained as follows:
(1) When using lead bending, please bend from the part more than 6 mm away from the root. When bending, do not damage the root or lead. Do not forcefully stretch, press or twist the lead.

(2) When the thermal fuse is fixed by screws, rivets or terminals, prevent poor contact caused by mechanical creep.

(3) The connector should be able to work reliably within the working range of the electrical product and will not be displaced due to vibration and impact.

(4) When welding the lead, limit the heating humidity to a minimum. Be careful not to add high temperature to the thermal fuse, forcibly stretch, press, or twist the thermal fuse and lead. Please cool for more than 30 seconds immediately after welding.

(5) Thermal fuses can only be used within the specified rated voltage, current, and specified temperature. Pay special attention to the maximum continuous temperature that the thermal fuse can withstand.

Termékleírás

SEFUSE Thermal Cutoff fuse SEFUSE 250V 15A Thermal Cut Out Link

Termékleírás

Termékjellemzők

Rated Current: 15A, Névleges feszültség: 250V, Rated Functioning Temperature: 73~240 Degree

Advantage: One shot operation, stable and precise, compact, durable and reliable by hermetic seal structure, excellently sensitive to ambient temperature.

Funkció: Hőbiztosíték, Widely Used in Electric Current Appliance as Heat Protection. When temperatures exceed the specified TF level, Electrical Contacts will Open.

Alkalmazások: Suitable for electric home appliances, electric industrial equipment, office automation equipment, plain paper copiers, transzformátorok, motors, stb.

Specifikáció

(SEFUSE SF-E thermal fuse, thermal cutoff, thermal link)

• Opening Temperature Tolerance: TF+0°C/-5°C
• Hőmérséklet minősítés (Tf):Rated opening temperature
• Holding temperature (Th):Maximum temperature measured at the case end ofthe thermal cutoff at which the thermal cutoff can be maintained for a period for 168 hours without opening.
• Maximum temperature (Tm):The maximum temperature at which a thermal cutoff can be maintained for10 minutes as an open circuit and can then be maintained at twice rated voltage for a period of 2 minutes during which its mechanical and electrical properties will not be impaired