Bimetál pattintótárcsás termosztát

A bimetál pattintótárcsás termosztát ( Termikus lekapcsoló készlet, pattintótárcsa Hőkapcsoló készlet) Megakadályozza a szárítógép túlmelegedését, ha a szárító felső határa Hőkapcsoló zárt körben meghibásodik.

A bimetál pattintótárcsás termosztát ( Termikus lekapcsoló készlet, pattintótárcsa Hőkapcsoló készlet) Megakadályozza a szárítógép túlmelegedését, ha a szárító felső határa Hőkapcsoló zárt körben meghibásodik. This part Cut-Off Circuit when the heater housing does not have adequate airflow through it; this is normally caused by restriction in the exhaust vent, plugged lint screen, or broken blower wheel. If this part fails, the dryer may not produce any heat. This kit includes one snap disc Thermal switch with a limit of 250 Fahrenheit fok, and one thermal cut-off fuse. jumper wires, and new female spade terminals Wire harness . Both components are mounted on the heater housing, and measure approximately 2 inches long and 1.5 inches wide each. This Thermal Cut-Off comes in silver and is constructed of metal.

Műszaki paraméterek
1. Elektromos paraméterek: 1) CQC, VDE, UL, CUL? AC250V 50 ~ 60Hz 5A / 10A / 15A (ellenálló terhelés)
2) UL AC 125V 50Hz 15A (ellenálló terhelés)
2. Üzemi hőmérsékleti tartomány: 0 ~ 240 °C (választható), temperature accuracy: ± 2 ± 3 ± 5 ± 10 °C
3. The difference between recovery and action temperature: 8 ~ 100 ℃ (választható)
4. Kábelezési módszer: plug-in terminal 250 # (optional bend 0 ~ 90 °); plug-in terminal 187 # (optional bend 0 ~ 90 °, vastagság 0.5, 0.8MM opcionális)
5. Service life: ≥100,000 times
6. Elektromos szilárdság: AC 50Hz 1800 V 1 percig, nem villog, Nincs bontás
7. Érintkezési ellenállás: ≤50mΩ
8. Szigetelési ellenállás: ≥100MΩ
9. Kapcsolattartó űrlap: Normally closed: temperature rise, contact open, temperature drop, contact open;
Normál nyitva: Temperature rises, contacts turn on, hőmérsékleti cseppek, contacts turn off
10. Enclosure protection level: Ip00
11. Földelési módszer: Connected to the grounded metal parts of the device through the thermostat metal case.
12. Telepítési módszer: It can be directly reinforced by the mother.
13.Temperature working range: -25 ℃ ∽ + 240 ℃ + 1 ℃ ∽2 ℃
Jellemzők
It has the characteristics of stable performance, nagy pontosságú, small size, light weight, nagy megbízhatóság, long life, and little concern for radio.

 Bimetal thermal protection

Bimetal thermal protection

Reset Snap Disc Thermostat

Reset Snap Disc Thermostat

szárító Termikus lekapcsoló kapcsolók

szárító Termikus lekapcsoló kapcsolók

Lépjen kapcsolatba velünk

Várom az e-mailedet, belül válaszolunk 12 óra értékes információkkal, amelyekre szüksége van.

KAPCSOLÓDÓ TERMÉKEK

Kérjen árajánlatot

Töltse ki ajánlatkérő űrlapunkat, és a lehető leghamarabb válaszolunk üzenetére!