PT100 / PT1000 RTD Temperature sensor probes with Process Connection

TM4101 PT100/PT1000 RTD Temperature sensor probes for Precise temperature measurement in containers, tanks and pipes;
For the connection to an evaluation unit;
RTD probes Very short response time for use in processes with fast temperature fluctuations;
Robust stainless steel housing with high protection rating and high pressure resistance;
Variable process connection using adapters.

RTD Pt100 Ohm Sensor Temperature Control Thermocouple Probe,1/2” Thread with M12 Molded Connectors | PR-22-3-100-A-M6-100-M12

ProSense temperature sensor, Pt100 RTD, lead wire transition probe, 6in insertion length, 1/4in probe diameter

Hőmérséklet érzékelő : Pt100 RTD, -58 hogy 572 deg F stainless steel sheath, 6ft 24 AWG wire leads

PRODUCT PROFILE
China-made PT100/PT1000 platinum thermal resistor temperature sensor. The localization process of PT100/PT1000 platinum thermal resistor temperature sensor is accelerating as the international situation is pressing. It came into being to cooperate with many companies to fully localize platinum thermal resistors. The PT100/PT1000 platinum thermal resistor element is independently developed and produced in China, which can meet the use of temperature sensors under most working conditions. The current accuracy can reach ±0.15℃. All the shapes of our products can be used for the packaging of this domestic resistor.

SPECIFICATION PARAMATER

Technical parameters of platinum resistance:
Temperature coefficient: TCR= 3850ppm/K
Specifikáció: DIN EN 60751 (compliant with IEC751)
Long-term stability: RO drift is less than or equal to 0.04% (500℃, after 1000 hours)
Vibration resistance level: at least 40g acceleration (10-2000Hz)
Self-heating coefficient: 0.4K/mW (at 0°C)
Response time: water @0.4m/s t0.5=0.05S t0.9=0.15S; air @2m/s t0.5=3.0S t0.9=10.0S
Measurement current: PT100 0.3-max 0.5 mA/PT1000 0.1 to 0.3mA

Measuring range

-40…150 °C

-40…302 °F

Process connection

threaded connection G 1/4

Installation length EL [mm]

Application

System	gold-plated contacts
Measuring element	1 x Pt 100; (to DIN EN 60751, class A)
Media	liquids and gases
Pressure rating [bar]	400

Electrical data

Protection class

III

Measuring/setting range

Probe length L [mm]

Measuring range

-40…150 °C

-40…302 °F

Accuracy / deviations

Accuracy [K]

± (0,15 K + 0,002 x|t|)

Reaction times

Dynamic response T05 / T09 [s]

1 / 3; (according to DIN EN 60751)

Operating conditions

Ambient temperature [°C]	-25…80
Storage temperature [°C]	-40…100
Protection	IP 68; IP 69K

Tests / approvals

Shock resistance

DIN EN 60068-2-27

50 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

20 g (10…2000 Hz)

MTTF [years]

22831.05

Mechanical data

Súly [g]	61
Anyag	stainless steel (1.4404 / 316L)
Materials (wetted parts)	stainless steel (1.4404 / 316L); FKM
Tightening torque [Nm]	35
Process connection	threaded connection G 1/4
Probe diameter [mm]	6
Installation length EL [mm]	25