Categorie di prodotti
- termistore 1
- Portafusibili per montaggio su PCB 27
- Cablaggio 1
- Portafusibili a lama 17
- termostato 34
- Fusibile elettrico 14
- Interruttore termico 20
- Portafusibili 36
- Sensore di temperatura 30
- Interruttore termico 58
- Fusibile per auto 19
- Fusibili imbullonati 7
- fusibile termico 29
- fusibili a montaggio superficiale 12
Tag dei prodotti
Sensore a termocoppie corazzate
Portafusibile a lama
Fusibile a lama per auto
Fusibile per auto
Fusibile a tubo ceramico
Interruttore automatico
Termostati a disco
Sensore di temperatura Ds18b20
Fusibile elettrico
Fusibile rapido/ritardato
Portafusibili
Fusibile per tubo di vetro
Portafusibili in linea
Termostato a disco a scatto limite
Mini interruttori automatici
Protezione da sovraccarico del motore
Protezione termica del motore
Sensore NTC
Sensore termistore NTC
Portafusibili per montaggio su PCB
Fusibile ripristinabile PPTC
Sensore di temperatura PT100
Termistore PTC
cablaggio del connettore del sensore
Sonde sensore & Cavi
Micro fusibile ad azione lenta
Fusibili a montaggio superficiale
Collegamento interruzione temperatura
Interruttore di controllo della temperatura
Fusibile termico
Sensore di temperatura
Cavo del sensore di temperatura
Sonda del sensore di temperatura
interruttore termico
Interruzione termica
Interruttore termico
Fusibile termico
protettore termico
Interruttore termico
Sonda sensore termistore
Asciugacapelli SEKI ST-12 interruttore termico ad azione rapida
The overheating protection SEKI ST-12 of the hair dryer is a temperature controller using a bimetal as a temperature sensing component. Prevent overheating and burnout of the heating wire when the hair dryer is running for a long time.
The overheating protection SEKI ST-12 of the hair dryer is a temperature controller using a bimetal as a temperature sensing component. Prevent overheating and burnout of the heating wire when the hair dryer is running for a long time.
When the hair dryer works normally, the bimetal is in a free state and the contacts are in a closed / open state. When the temperature reaches the operating temperature, the bimetal will quickly act upon the internal stress caused by the heat, opening / closing the contact and cutting / connecting the circuit, thereby controlling the temperature. When the appliance cools down to the reset temperature, the contacts are automatically closed / opened to resume normal working conditions.
The following points should be noted when installing anti-overheating protection SEKI ST-12:
1. When using contact temperature-type installation, the metal cover should be close to the installation surface of the controlled appliance. In order to ensure the effect of temperature sensing, the surface of temperature sensing should be coated with thermal grease or other thermally conductive medium with similar properties.
2. Do not collapse, loosen or deform the top of the cover during installation, so as not to affect the performance.
3. Do not allow liquid to penetrate into the thermostat, do not make the shell crack, and do not change the shape of the external terminal at will.
4. The product is used in a circuit with a current not greater than 5A, and the copper core cross section should be selected as 0. 5-1㎜2 wire connection; For use in circuits with a current not greater than 10A, the copper core cross section should be 0.75-1.5㎜2 wire connection.
5. The product should be stored in a warehouse with a relative humidity of less than 90%, an ambient temperature below 40 °C, ventilated, clean, dry and non-corrosive gas
product description
model:
ST-12 series temperature switch Scope
⑴ hair dryer,
⑵ curlers,
⑶ oven,
⑷ electric heaters,
⑸ popcorn machine,Overheating protection SEKI ST-12
⑹ tableware dryer temperature protection, and other products.
● ST-12 Series Temperature Switch Description:
ST-12 Series Temperature Switch Technical Data
Rated temperature Off temperature Rated temperature Off temperature
55℃ 55±5℃ 105℃ 105±5℃
60℃ 60±5℃ 110℃ 110±5℃
65℃ 65±5℃ 115℃ 115±5℃
70℃ 70±5℃ 120℃ 120±5℃
75℃ 75±5℃ 125℃ 125±5℃
80℃ 80±5℃ 130℃ 130±5℃
85℃ 85±5℃ 135℃ 135±5℃
90℃ 90±5℃ 140℃ 140±5℃
95℃ 95±5℃ 145℃ 145±5℃
100℃ 100±5℃ 150℃ 150±5℃
Reset temperature: When below 75 ℃, operating temperature, operating temperature reset temperature of minus 20 ℃ ± 15 ℃
When the operating temperature at 75 ℃ ~ 100 ℃, operating temperature reset temperature of minus 30 ℃ ± 15 ℃
When the operation temperature above 100 ℃, operating temperature reset temperature is minus 40 ℃ ± 15 ℃
Rated voltage (V) Rated Current (UN)
10125250571015
By certified
⑴ the thermal protection adapted for relative humidity less than 90℅, non-flammable gas and conductive dust exist in general indoor environment.
⑵ thermal protector in the installation process, do not pull pressure shrapnel thermal sensor in order to avoid poor contact, inaccurate temperature.
⑶ prevent dangerous over-temperature components under fault conditions to avoid accidents.
Contattaci
Aspetto la tua email, ti risponderemo entro 12 ore con le preziose informazioni di cui avevi bisogno.
PRODOTTI CORRELATI
Protezione da sovraccarico klixon 3MP+PTC per ripristino dallo spegnimento del motore
3Protettore da sovraccarico di corrente MP+PTC (con funzione di ripristino dello spegnimento)
Funzione autosufficiente del PTC: Quando scatta il sovraccarico, può essere acceso automaticamente dopo aver interrotto l'alimentazione.
Con funzione di protezione dal ritardo. È prodotto con la tecnologia proprietaria di Texas Instruments KLIXON ® negli Stati Uniti.