Micro medical radiofrequency ablation electrode temperature sensor

Medical surface temperature sensor
Product introduction:
φ0.30mm PI tube packaged medical temperature sensor. This product is a miniature medical radiofrequency ablation electrode temperature sensor. The product uses a polyimide tube with an outer diameter of Maxφ0.30mm to encapsulate epoxy resin, and the lead wire uses an enameled wire with an outer diameter of 0.05mm. The resistance value of the miniature thermistor sensor is calibrated one by one.

Medical surface temperature sensor, modelli di prodotto completi, qualità affidabile. 1Resistenza da K a 680K opzionale, durata utile fino a 10 anni. Sensore di temperatura per uso medico, sensore automobilistico, Il chip del sensore dell'elettrodomestico utilizza un chip ad alta precisione, il tempo di risposta può raggiungere 0.5 secondi.

The chip is epoxy encapsulated and can be equipped with a 6.3mm mono audio plug (other plugs can also be equipped according to customer requirements). The measurement temperature tolerance is within (25℃~45℃)±0.1℃, compatible with YSI400 series temperature sensors.

Caratteristiche del prodotto
PI maxφ0.30mm
Enameled wire OD0.05mm
Quick response
Intervallo di temperatura operativa: 0℃~100℃

Product application
Monitoring ablation temperature detection

Product structure and size (Unità: mm)

Selection of medical temperature sensor

Sensore di temperatura medico

Temperature sensor for monitoring ablation temperature detection

Packing quantity: 1 pcs/packing

2.252kΩ or 10kΩ RT temperature resistance table for medical sensors

Monitoring ablation temperature detection temperature sensor product structure and size

Precautions
— Purpose of this product: temperature measurement and control.
— Control the energy dissipation generated by the current flowing through the chip within the required range to avoid measurement errors caused by self-heating of the component.
— If the shrink sleeve is heated at the temperature sensing head, the air outlet of the welding gun should be more than 30mm away from the temperature sensing head to avoid excessive thermal shock of the resistor body caused by high temperature, resulting in resistance drift.
— Storage temperature 0℃～50℃, humidity 30%~80%RH; avoid storage in an environment with corrosive gas or direct sunlight; after opening the package, it needs to be resealed for storage.
— In view of the structural characteristics of epoxy components, users should avoid excessive stretching and bending forces from the lead wires on the component encapsulation head when using it. If the lead wire needs to be bent, the bending point or force point should be controlled on the lead wire 6mm below the encapsulation head to avoid pulling the chip, causing resistance drift or even open circuit, especially when the component is heated.

Services
1. Your inquiry will be replied within 24 ore;
2. Well-trained and experienced staff are always at your service.
3. Unique design products and many private mold product are waiting for your choice.
4. Strictly protect your private information and your ideas of design.

Domande frequenti

Q1. Can I have a sample order for NTC, PT100,PT1000, RTD, and Ds18b20 SENSOR?
UN: SÌ, we welcome sample order to test and check quality. Mixed samples are acceptable.