製品カテゴリ
- ヒューズボックスホルダー 36
- 温度センサー 30
- サーマルスイッチ 58
- カーヒューズ 19
- ボルトダウンヒューズ 7
- 温度ヒューズ 29
- 表面実装ヒューズ 12
- サーミスター 1
- PCB マウント ヒューズ ホルダー 27
- ワイヤハーネス 1
- ブレードヒューズホルダー 17
- サーモスタット 34
- 電気ヒューズ 14
- サーマルサーキットブレーカー 20
製品タグ
装甲熱電対センサー
ブレードヒューズホルダー
車のブレードヒューズ
カーヒューズ
セラミック管ヒューズ
サーキットブレーカー
ディスクサーモスタット
DS18b20 温度センサー
電気ヒューズ
速断/遅断ヒューズ
ヒューズボックスホルダー
ガラス管ヒューズ
インラインヒューズホルダー
リミットスナップディスクサーモスタット
ミニサーキットブレーカー
モーター過負荷保護装置
モーターの熱保護
NTCセンサー
NTCサーミスタセンサー
PCB マウント ヒューズ ホルダー
PPTC リセッタブル ヒューズ
PT100 温度センサー
PTCサーミスタ
センサーコネクターハーネス
センサープローブ & ケーブル
スローブローマイクロヒューズ
表面実装ヒューズ
温度カットオフリンク
温度調節スイッチ
温度ヒューズ
温度センサー
温度センサーケーブル
温度センサープローブ
温度スイッチ
サーマルカットオフ
サーマルカットアウトスイッチ
温度ヒューズ
サーマルプロテクター
サーマルスイッチ
サーミスタセンサープローブ
88A Manual Reset Protector KUOYUH MINI Overcurrent Protector Breaker
88A series equipment manual reset circuit breakers (commonly known as motor overcurrent protectors) are suitable for AC 50/60Hz, rated working voltage to 250Vac, DC 32Vdc, rated current to 3A-20A for additional overload protection in the internal branch circuit of electrical equipment, a key part of the product The temperature sensing protector.
カテゴリー: サーマルサーキットブレーカー
タグ: サーキットブレーカー, ミニサーキットブレーカー, モーター過負荷保護装置, モーターの熱保護
88A series equipment manual reset circuit breakers (commonly known as motor overcurrent protectors) are suitable for AC 50/60Hz, rated working voltage to 250Vac, DC 32Vdc, rated current to 3A-20A for additional overload protection in the internal branch circuit of electrical equipment, a key part of the product The temperature sensing protector. 88 Series Push-to-Reset circuit breaker is a unipolar, single-push reset thermal protector product, used to protect motor equipment.
Product name: 88A series
rating :3A-20A;
(Input Power):125VAC/250VAC/32VDC 50-60Hz;
(Withstand voltage strength):1500VAC/1min;
Leakage current: ≤0.5mA(1500VAC/min,the leaked current is less than≤0.5mA);
(Insulation Resistance):500VDC1Min≥100MΩ;
(Rated short-circuit capacity):125VAC/1000A,250VAC/1000A;
(Rated breaking capacity): 6 times rated current;
(reset): Manual Push Reset;
(Reset Time): Within 60s”;
Tripping characteristics
(The test environment temperature):25℃±3℃;
(200% of Ratcd Currcnt): 5-30s” Seconds Trip;
(150% of Rated Current): Trip within 1 Hour;
(100% of Rated Current): Hold, No Trip ;
Main Technical Parameters
定格電流 | 125/250VAC |
32VDC | |
定格電圧 | XXA |
Interrupt Capacity | 1000あ(UL1077) |
Insulation Resistance | 500VDC 5s″, insulation resistance≥100ΜΩ |
Dielectric Strength | 1500VAC/min |
Reset Time | within 60S |
Reset Type | Manual reset |
Mechanical/Environmental Data
Working temperature: -10℃ to 60℃
Terminal: Quick-connect terminal or solder terminal
Nut: a variety of options, see product appendix and diagram
Terminal temperature rise: rated current <65℃ (ambient temperature is 25℃)
Contact life: >500Cycles at rated current and 125VAC×150%
Table of Environmental Correction Factors
(Derating Factor) | |
-5℃ | (3A-4A)×1.2, (5A-30A)×1.12 |
+40℃ | (3A-4A)×0.92,(5A-30A)×0.94 |
The time current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping. Please multiply the current brea ker current ratings by the derating factor shown below
Example:
Normal Continuous Current= 10A
Ambient Temperature = 45 ℃
Multiplication Factor = 0.85
Recommended Rating=10A/0.85=11.8A
Select the Nea rest Rating = 12A
OVERLOAD | TRIP TIME |
150% | Trip in a hour |
200% | 5.0-30.0 SEC |
300% | 1.2-12.0 SEC |
400% | 0.6-5.0 SEC |
500% | 0.4-2.8 SEC |
600% | 0.3-1.8 SEC |
800% | 0.18-0.9 SEC |
1000% | 0.12-0.7 SEC |
Performance form of the experiment
Max Resistance V.S.Current Rating at 25℃ | Derating Factor | ||
温度 | Rating Amp | ||
Current Rating in Amp | Max Resistance in ohms | 60℃ | X 0.6 |
3-4Amp | < 0.05 | 50℃ | X 0.7 |
5-6Amp | < 0.04 | 40℃ | X 0.8 |
7-8Amp | < 0.025 | 30℃ | X 0.9 |
9-11Amp | < 0.02 | 25℃ | X 1.0 |
12-13Amp | < 0.01 | 20℃ | X 1.1 |
14-16Amp | < 0.008 | 10℃ | X 1.3 |
17-25Amp | < 0.007 | 0℃ | X 1.5 |
Approval | File No. | 定格電流 | 定格電圧 | Standard |
CUL | E155159 | 3-30あ | 125/250VAC | UL1077 |
TUV | B140558611005 | 3-30あ | 125-250VAC | EN60934 |
32VDC | ||||
CCC | 2011010307520568 | 3-30あ | 125/250VAC | GB17001 |
お問い合わせ
メールを待っています, 以内に返信させていただきます 12 必要な貴重な情報を何時間も入手できる.
関連製品
92 Series Manual Reset Overload Protector Battery Circuit Breaker 32VDC 0.5A~20A
KUOYUH 92 Series Overload Protector Circuit Breaker has automatic reset protector, manual reset protector, switch and other series. It has passed CQC, TUV, VDE, UL, CE, CB, SAA, KC and other certifications. It can be used for additional overload protection in branch circuits inside electrical equipment with AC 50/60Hz, rated working voltage up to 250Vac, DC 32Vdc, and rated current 0.5A to 300A.
China Custom Auto Reset Circuit Breaker With Bolt
What Is it a auto reset circuit breaker? Functions and applications of circuit breaker:
Auto reset circuit breaker uses the action characteristics of bimetallic strips as the working principle of the product. It is used in AC/DC Rated current 5-50A; Input voltage: standard 12VDC; 125VAC/250VAC50-60HZ; customizable 24VDCcircuits that need to be protected from overload or excessive current.