KSD301 10A 250V NC / NO サーモスタット温度スイッチ 温度制御スイッチ

KSD301NC / NO （ノーマルオープン/ノーマルクローズ） サーマルコントロールスイッチ 電気定格 : 16AC125V (抵抗負荷). 10250V AC サーモスタット. 16AC250V. 動作温度 : 50 ～230℃ (UL.CUL 205℃). バイメタル反応,自動リセットサーモスター, プラスチックサーモスタットシェル, 固定プロテクターホルダー. Fully encapsulated thermostat in industrial quality. Opens after reaching prescribed (action) 温度. At lower temperature the thermostat is closed.

KSD301 温度制御スイッチ サーモスタット 150C N.C 250V 10A

KSD301 10A 250V Bimetal thermostat Normally Closed Temperature Switch Thermosta

KSD301 温度スイッチ制御センサーサーマルサーモスタット 50°-160° 内反足

製品説明
KSD301 thermostat is a small temperature controller. Its working temperature performance is fixed, no adjustment is required, crisp, 信頼性のある, no arcing, long service life, and less radio interference. It is mainly used in disinfection cabinets, 電気ウォーターボトル, コーヒーポット, electronic tile supports, hot water bags, ウォーターサーバー, ヘアドライヤー, 掃除機, 電気ヒーター, 電子レンジ, 電気アイロン, clothes dryers, motors and other electrical appliances.

Current Ratinf(そして): 5あ,10あ,15A 16A;
定格電圧(ウル):125V 250V ac;
Tf Tolerance: ±5℃
Electric intensity: AC2000V 50/60Hz
接触抵抗: less than 50mΩ
絶縁抵抗: more than 100MΩ
応答速度: ≤1℃/min
Life time: より多い 30000 サイクル
承認: UL TUV CQC

動作温度(TF) & Reset Temperature(Tr)

Dimension of KSD301 Bimetal Thermostat Temperature Switch Thermal control Switch

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, no bracket

KSD301 Temperature Control Switch Upright Terminal, no bracket

What’s the difference between NC and NO?
通常閉: the thermostat is closed(connected) at normal status
通常開: the thermostat is open(disconnected) at normal status

Please Note :
During installation, the switch should be completely fixed close to the mounting surface of the tested appliance.
Do not collapse or deform the plastic / metal shell during installation.
For metal temperature controller, do not remove the insulating sleeve to avoid electric leakage.
Not suitable for air temperature sensing, only applied to contact sensing.

標準パッケージ
100袋あたりの個数

出荷期間:
EXW, DDU, DDP, C&F, FOB

配送方法:
国際エクスプレス, 飛行機で, 海によって