Temperature Limit Controller SPST Switch, Auto Reset Snap-Disc Thermostats

Surface mount limit control switch (オープンオンライズ, SPST, Auto Reset thermostats) provide fail-safe controls for temperatures above the safety snap-disc thermostats. They operate using temperature-sensitive metals that change shape and disconnect the connected circuit when the trigger temperature is reached. They are installed on flat surfaces using two mounting holes and fasteners to hold them in place. Commonly used as protection devices to turn systems on or off when temperatures exceed or drop below their setpoint.

Surface mount limit control switch

China custom Temperature Open on Rise, SPST thermostats

Limit Switch High Surface Mount 220 Degrees Fahrenheit

Snap-Disc thermostatic switch, also known as temperature limit controller SPST switch, is an bimetal automatic control element that physically deforms inside the switch according to the temperature change of the working environment, thereby generating a conduction or disconnection action. Its working principle is mainly to use the characteristics of bimetal thermal expansion and contraction of objects, sense the temperature through the temperature sensing element, and then control the on and off of the circuit.

Snap-Disc thermostatic switches are widely used in various devices that require temperature control, such as air conditioners, 冷蔵庫, 給湯器, 等. In air conditioners, the thermostatic switch can sense the indoor temperature and control the start and stop of the compressor according to the set temperature range, so as to keep the indoor temperature constant.

Thermostatic switches can be divided into many types according to their control methods and structural characteristics, such as vapor pressure type, Capillary tube type, gas adsorption type, bimetal expansion type and electronic thermostat. Different types of thermostatic switches have different characteristics and applicable scopes, and users can choose according to specific needs.

加えて, when using a thermostatic switch, it is necessary to pay attention to its rated working voltage, current and other parameters to ensure its normal operation and avoid safety accidents. 同時に, it is also necessary to pay attention to the installation method and environmental requirements to ensure the accuracy and reliability of the thermostatic switch.

In short, the temperature control switch is one of the indispensable and important components in modern electronic equipment. Its accuracy and reliability have an important impact on the normal operation and service life of the equipment.

Snap Disc Limit Switch, or snap action thermostats

Snap Disc Limit Control, カットイン- 210 F度, 切り取る – 250 F度 (オープンオンライズ)

Auto Reset Snap-Disc Thermostats switch-1

Temperature Limit Controller switch: Close on Rise, SPST, 90°F_130°F Closing, 70°F_110°F Opening, 20°F (6UEE1)

China custom Temperature Limit Control – Thermo-Disc Thermostats.
Close on Rise;
自動リセット;
Switch Opening Temperature70 °F; 110 °F.
Switch Closing Temperature 90 °F; 130 °F.
Temperature Differential 20°F
表面実装
Adjustable Temperature range
製品説明:

Product Details
ブランド: YAXUN
Manufacturer Part Number: KDS301，KSD302
Product Type: Temperature Limit Controller Switch
応用: Limit Control
スイッチアクション: オープンオンライズ
お問い合わせフォーム: SPST
Input Voltage: 120交流電圧; 277交流電圧
Pilot Contact Rating:125 VA
Resistive Amps @ 120V AC: 15 A~45 Amp
Resistive Amps @ 240V AC: 10 A~40 Amp
Resistive Amps @ 277V AC: 25 A~60 Amp
Inductive Amps @ 120V : 10 A~60 Amp
Inductive Amps @ 240V: 5 A~60 Amp
リセットタイプ: 自動リセット
Switch Closing Temperature: 160 °F
Switch Opening Temperature: 200 °F
Temperature Differential” 40°F
Wire Connections: Spade Terminals
取り付け: 表面実装
Mounting Hole Diameter: 1/8 in
Mounting Hole Center to Center Distance: 1-5/8 in
Mounting Base Length: 2 in
Mounting Base Width: 1-5/8 in
Overall Height: 1 in
Overall Width: 2-3/4 in
Overall Depth: 1-1/2 in
端子サイズ: 1/4 in
規格: cULus Recognized
Country of Origin: 中国