중국 TO-220 디스크 온도 조절기 열 스위치 공급 업체

중국 사용자 정의 TO-220 열 차단 스위치 JUC-31F/KSD-01F instead 6700 시리즈 초소형 온도조절기. JUC-31F/KSD-01F는 RoHS를 준수합니다., 포지티브 스냅 액션, 단극 / 한 번 던지기, 단일 장치에서 정확하고 안정적인 감지 및 스위칭을 제공하는 초소형 바이메탈 온도 조절기. The JUC-31F/ KSD-01에프, 6700 series thermostat dimensionally conforms to the international product package standard Y220 / TO220.

6700 30-150Deg 과부하 250V 2A 미니 열 스위치

한국예탁결제원-01F 250V 2A Mini Bimetallic Thermostat Thermal Switch

한국예탁결제원-01F 열 차단 스위치 , 터치형 열 차단 스위치

Thus, theJUC-31F / 한국예탁결제원-01에프, 6700 may be automatically placed and soldered onto PC boards with high speed automated equipment, eliminating the need for the expensive hand placement and termination required today for most power supply thermostats.

JUC-31F / 한국예탁결제원-01에프, 6700 특징
RoHS compliant per EU directive 2002 / 95 / EC, UL, TUV;
TO-220 / Y-220 international electronic package standard;
Ideal for surface and air sensing on PC boards and heat sinks;
VDE approved with “P” bracket option;
Gold-plated contacts;
Up to 20,000 life cycles @ max standard amperage;
Up to 100,000 life cycles @ max gold contact amperage;

접촉 저항 : 50 최대 밀리옴 (before and after rated life)
Contact Ratings : Cycles Voltage Amps (resistive); 20,000 48 VDC 0.5; 100,000 5 VDC 0.001 (gold).
Contact Operations : Either close on rise (make) or open on rise (break)
작동 온도 : 40°C to 130°C (104°F to 266°F)
Temperature Tolerance : Standard of ±5°C (±9°F) with nominal operating temperature settings in 5°C increments
Short Term / Long Term Exposure Limit Short = 260°C (500°F), 10 second duration; Long = -55°C to 160°C (-67°F to 320°F)
유전 강도 : Nickel-plated copper bracket has 1480 VAC 60Hz, 1 second duration terminals to case. Plastic bracket has 2000 VAC 60Hz, 1 second duration terminals to case.
절연저항 : 100 Mohms at 500 VDC
Contact Bounce : 3 milliseconds max (make)
Vibration : Per Mil-Std-202, method 204D, test condition D, 10 에게 2,000 헤르츠
Shock : Per Mil-Std-202, method 213, test condition C, 100 G’s for 6 millisecond duration, 1⁄2 sine wave
Seal : High temperature epoxy sealed for wave soldering and cleaning, moisture proof per Sensata specification S-722 (unit will not leak while submerged in 9” of water for a minimum of two minutes)
Base Material : PPS (Polyphenylene Sulfide), 94 VO rated
Terminal Material : 65% 구리, 18% Nickel
Contact Material : Gold-plated or overlay, silver crossbar
Mounting Bracket Material : Nickel-plated copper bracket has 1480 VAC 60Hz, 1 second duration terminals to case. Plastic bracket has 2000 VAC 60Hz, 1 second duration terminals to case.
Chemical Resistance : Unit is resistance to water, salt, 술, 암모니아, trichlorethane and most other organic solvents
Solderability : Terminal material is selectively striped with lead-free solder for improved solderability
Soldering Heat Resistance : Per Mil-Std-202G, method 210F, test condition C & 케이, test condition K validated at 260°C for 25 seconds
Weight : Approximately 0.5 grams
Agency Approvals : cЯUus recognized E36687
VDE approval 0631/12.83 : RoHS Compliant per EU Directive 2002/95/EC

Mini Bimetallic Thermostat Thermal Controller Switch JUC-31F 250V 2A 0 To 130 Degree

6700 TO220 Thermostat Thermal Switch Dimensions

1. JUC-31F thermostat’s Principle and structure
The product is a sensor of belonging to touch-type plastic Snap temperature thermostat ,the adoption of international TO220/Y220 standard package ,the product has high reliability ,sensitive and accurate ,작은 크기 ,가벼운 무게 ,very easy to install and so on , very suitable for PCB circuit board / heat equipment/ power device installed Specification
2. JUC-31F thermal protector’s Specification
2.1. Contact load: AC 120V 1A; DC48V 1A; AC 220V 1.5A/3A; DC 24V 1.5A/3A
2.2. 접촉 유형 : D for normally closed type; H for normally open type
2.3. 온도

2.4. Overheating temperature:250 도
2.5. 접촉 저항: 50mΩ 미만
2.6. 절연저항 : 이상 100 mΩ
2.7. Dielectric withstand voltage: more than 1500V
2.8. 제품 수명: 이상 10000 타임스
2.9. Weight:1.7 g
2.10. Action temperature deviations:+-5 도
3. The drawing of JUC-31F