서미스터 센서 와이어 하네스 & 케이블 어셈블리

필요한 크기가 다르고 나사가 장착 된 장치에 고정 된 표면 장착 유형 센서입니다. . 제품은 다른 온도에 따라 사용자 정의 할 수 있습니다. 이것은 싱글입니다 (1) 서미스터 또는 팬 와이어 하네스. Harness measures 36″ (914.4mm), 22 AWG. 회로 보드를 선택할 수 있습니다 (람보, 미니 램버,

Temperature sensor wiring harness & Cable Assembly for ntc, PTC. Common temperature probe packages are: 유리, epoxy resin, threaded, 세라믹.
Thermistor sensors are heat-sensitive semiconductor resistors designed for temperature measurement and compensation. Its portfolio covers the NTC thermistor series with excellent long-term stability in high-temperature and high-humidity environments, such as ultra-small products for smartphones and tablet terminals, 자동차 애플리케이션, LED modules, and industrial applications. High-precision resistor tolerances and B-values give chip NTC thermistors extremely precise temperature sensing capabilities.

Temperature detection of LED flash substrate based on thermistor sensor harness
NTC thermistor is a thermal resistance element whose resistance drops sharply as the temperature increases. Utilizing this characteristic, in addition to being designed as a temperature sensor, it is also used as a temperature protection element to prevent circuit overheating.
By installing an NTC thermistor close to the heat source, the heat source temperature can be accurately detected. 하지만, due to limitations such as substrate size and PCB wiring, it is sometimes necessary to install it away from heat sources.
We assumed this situation, used the LED on the LED flash substrate as the heat source, and confirmed the measured temperature difference due to the different mounting positions of the LED and NTC thermistor through heating simulation. 게다가, the influence of substrate thickness was confirmed and the results are explained.

3D Printer Bambu Lab X1/X1C Thermistor 100K Thermistor Temp Sensor and 2pcs Cartridge Heater, Hotend Quick Replacement Parts, for 3D Printer

3D Printer Bambu Lab X1/X1C Thermistor 100K Thermistor Temp Sensor and 2pcs Cartridge Heater, Hotend Quick Replacement Parts, for 3D Printer

50cm NTC Thermistor Temperature Waterproof Probe Wire 10K 1% 3950 W1209 W1401 Cable Sensor

50cm NTC Thermistor Temperature Waterproof Probe Wire 10K 1% 3950 W1209 W1401 Cable Sensor

mini cooper coolant temperature sensor pigtail Coolant Temperature Sensor Plug Harness

mini cooper coolant temperature sensor pigtail Coolant Temperature Sensor Plug Harness

Application notes
Fault manifestations and countermeasures of NTC thermistors in actual use
A negative temperature coefficient (NTC) thermistor is a semiconductor resistor whose resistance decreases as temperature increases, and the rate of change in resistance is large.
광범위한 응용 프로그램이 있습니다, and its main uses include temperature detection in electronic equipment and temperature compensation in various applications, such as modular products.

When using NTC thermistors, users must ensure that they are used correctly.
Improper use can result in the product not operating to its full potential and, in the worst case, malfunctioning.
Below we will list two manifestations of NTC thermistor failure caused by incorrect use, namely “cracks” and “substrate melting”.
Explain the causes of the failure and provide corresponding countermeasures.

Product type characteristics:
Sensor Type: HVAC/R, Surface Sensor

Electrical characteristics:
저항 [KΩ] 25°C에서 (kΩ): 10
베타값 (25/85) (케이): 3976

Mechanical accessories:
Wire/Covering: 22 AWG zipcord
와이어 길이: 3048 mm [120 ~에]

Usage environment:
작동 온도 범위: -40 – 105 ℃ [ -40 – 221 °F ]
저항기의 기준 온도: 25 ℃ [77 °F]
Temperature Accuracy (℃): ± .2 (0 – 70), ± .2 (0 – 70)
저항 공차 (%): ±.88

3M 10K B3950 Thermistor Temperature Sensor,able to Support -25 에게 125 Degree Celsius,Sensitive NTC Temperature Sensor Probeprobes has 5- 25mm Stainless Steel housing

3M 10K B3950 Thermistor Temperature Sensor,able to Support -25 에게 125 Degree Celsius,Sensitive NTC Temperature Sensor Probeprobes has 5- 25mm Stainless Steel housing

10K NTC 서미스터 프로브 15.7 에어컨의 인치 에폭시 민감한 온도 온도 센서

10K NTC 서미스터 프로브 15.7 에어컨의 인치 에폭시 민감한 온도 온도 센서

3D 프린터 서미스터 온도 센서 NTC100K 5 3- 렌더로 밀봉 된 빠른 교체 싱글 엔드 유리를 포장하십시오 3 v2, 끝 3 프로 엔드 5

3D 프린터 서미스터 온도 센서 NTC100K 5 3- 렌더로 밀봉 된 빠른 교체 싱글 엔드 유리를 포장하십시오 3 v2, 끝 3 프로 엔드 5

Probe characteristics:
조사: Nickel plated brass

서미스터는 온도 변화에 따라 저항이 변하는 센서 저항기입니다.. 다양한 온도 계수에 따라, they are divided into positive temperature coefficient thermistor (PTC 서미스터) and negative temperature coefficient thermistor (NTC 서미스터). The resistance value of a positive temperature coefficient thermistor increases as the temperature increases, and the resistance value of a negative temperature coefficient thermistor decreases as the temperature increases. They are both semiconductor devices.

The main features of thermistor sensors are:
① It has high sensitivity, its temperature coefficient of resistance is 10 에게 100 times greater than that of metal, and it can detect temperature changes of 10-6°C;
② Wide operating temperature range, normal temperature devices are suitable for -55℃~315℃, high temperature devices are suitable for temperatures higher than 315℃ (currently up to 2000℃), and low temperature devices are suitable for -273℃~-55℃;
③ Small in size, it can measure the temperature of gaps, cavities and blood vessels in living organisms that cannot be measured by other thermometers;
④ Easy to use, the resistance value can be selected from 0.1 to 100kΩ;
⑤ Easy to process into complex shapes and can be produced in large quantities;
⑥ Good stability and strong overload capability.

Basic characteristics of thermistor sensors
The resistance-temperature characteristics of the thermistor sensor can be approximately expressed by the following formula: R=R0exp{B(1/T-1/T0)}: 아르 자형: resistance value at temperature T (케이). Ro: Resistance value at temperature T0, (케이) 비: B 값, *티(케이)=t(ºC)+273.15. 사실은, the B value of the thermistor is not constant, and its variation varies depending on the material composition, and can even reach a maximum of 5K/°C. 그러므로, when applying Equation 1 in a larger temperature range, there will be a certain error between it and the actual measured value. Here, if the B value in Equation 1 is calculated as a function of temperature as shown in Equation 2, the error from the actual measured value can be reduced and it can be considered to be approximately equal.
BT=CT2+DT+E. In the above formula, 씨, D and E are constants. 게다가, fluctuations in the B value caused by different production conditions will cause the constant E to change, but the constants C and D remain unchanged. 그러므로, when discussing the fluctuation of the B value, only the constant E needs to be considered. Calculation of constants C, 디, and E. Constants C, 디, and E can be calculated from 4 points of (온도, 저항값) 데이터 (T0, R0). (T1, R1). (T2, R2) 그리고 (T3, R3), Calculate through equations 3 에게 6. 첫 번째, find B1, B2, and B3 based on the resistance values of T0 and T1, T2, and T3 from pattern 3, and then substitute them into the following patterns.
Resistance value calculation example: According to the resistance-temperature characteristic table, find the resistance value at 25°C to be 5 (kΩ). The resistance value of a thermistor with a B value deviation of 50 (케이) between 10°C and 30°C. 단계 (1) According to the resistance-temperature characteristic table, find the constants C, 디, and E. To=25+273.15T1=10+273.15T2=20+273.15T3=30+273.15
(2) Substitute BT=CT2+DT+E+50 to find BT.
(3) Substitute the numerical value into R=5exp {(BT1/T-1/298.15)} to find R. *티:10+273.15~30+273.15.

There are many types of thermistors. Please inform us of the following parameters when ordering:

serial number Description of parameters to be selected Optional parameter recommendations
1 Thermistor R value and B value? Commonly used R25: 5KΩ/10KΩ/50 KΩ/100 KΩ
2 Precision choice? ±1%
±2%
±5%
3 온도 측정 범위? -40~300℃ optional
4 Lead length? 0.05m~100m optional
5 Appearance packaging form? Water dripper/straight pipe/thread/copper nose/surface sticker, 등.
6 How to deal with the end of the line? Dip tin/U-shaped fork/straight pin/aviation plug/waterproof connector/terminal, 등.
7 For other requirements not mentioned, please inform us in detail.

문의하기

이메일을 기다리는 중, 이내에 답변해 드리겠습니다. 12 필요한 귀중한 정보를 몇 시간 동안.

관련 상품

조회를 요청하다

견적 요청 양식을 작성하시면 최대한 빨리 귀하의 메시지에 답변해 드리겠습니다.!