Bimetaal thermische beveiliging GEEN temperatuurregelaar KSD9700 / Seki

Proces van aangepaste kleine bimetaal thermische beschermer NO / NC (KSD9700 / Seki temperatuurschakelaar kunststof, Bimetaal; Nominale spanning : 250V; Huidig : 5A~25 Amp ; ).

Aangepaste -20 ~ 280 ℃ Hi-Amp temperatuurbegrenzer kleine thermische beveiligingsschakelaar

Uxcell KSD9700 Thermostat 55℃ N.C 10A Metal Bimetal Temperature Control Switch

Bimetaal thermische beveiliging GEEN temperatuurschakelaar 250V 40-100℃

Bimetal Thermal Protector is a temperature control switch that uses bimetal as a temperature sensing element. Wanneer het apparaat normaal werkt, the bimetal strip is in a free state and the contacts are in a connected state. When the temperature rises to the operating temperature point, the bimetal element is heated to generate internal stress and quickly operates, opening the contacts and cutting off/connecting the circuit, daardoor een rol van thermische bescherming spelen. Wanneer de omgevingstemperatuur daalt tot de resettemperatuur van de beschermer, De contacten sluiten opnieuw om het circuit te verbinden.

Productnaam : Temperature Control Switch;
Model. No : KSD9700;
Materiaal : Plastic, Bimetaal
Contact : NC(Normaal dichtbij);
Nominale spanning : 250V;
Huidig : 5A~25 Amp
Max Rated Disconnection Temperature : 70C;
Kleur : Silver Tone, Zwart
Cable Length : 6.5cm/ 2.6″;
Head Dimension : 20 X 8 x 3mm / 0.79″ x 0.31″ x 0.12″(L*W*T)

I’m looking KSD9700 temperature switches and came across this type which warns against shorts and instructs you to use a provided plastic sleeve to prevent this.

I’d like to understand exactly what could short to what. I wouldn’t have thought that the outer metal shell would be conductive to the leads, but is that actually what this warning is about? If not, what are they warning against? YES

Aside from the risk of a short causing a problem, I would ideally want the metal case to be directly on the object whose temperature is being measured for the fastest response without any insulating effect of the plastic.

Process of Custom Thermal Protector NO / NC (KSD9700 / Seki) Temperature Control Switch
①: Bespreek de wensen met klanten (controle van het thermische uitschakeltemperatuurpunt, actie modus (handmatige en automatische reset), temperatuur opnieuw instellen, installatiemethode en grootte);
②: Submit preliminary plan for feasibility analysis of customer request;
③: Financial accounting cost;
④: Technical preparation experiment and design simulation;
⑤: Procurement investigation of various material costs;
⑥: Production knows product processing flow and staffing;
⑦: Quality evaluation and inspection process;

Productbeschrijving

What’s the difference between N/C and N/O
Normaal gesloten: When the temperature falls to the reset temperature, the thermostat contact can be connected again.
Normaal geopend: When the temperature falls to the reset temperature, the thermostat contact can be disconnected again.

KSD9700 Seki Temperature Control Switch Dimension & Structure