KSD301 10A 250V NC / NEE Thermostaattemperatuurschakelaar Thermische controleschakelaar

KSD301NC / NEE (Normaal open/normaal gesloten) Elektrische classificatie thermische schakelaar : 16Een 125V wisselstroom (Resistieve belasting). 10Een 250V AC-thermostaat. 16Een 250V wisselstroom. Bedrijfstemperatuur : 50 ~ 230℃ (UL.CUL 205℃). bimetaal reactie,automatische reset thermostaat, kunststof thermostaathuis, vaste beschermerhouder. Fully encapsulated thermostat in industrial quality. Opens after reaching prescribed (action) temperature. At lower temperature the thermostat is closed.

KSD301 Temperatuurschakelaar Thermostaat 150C N.C 250V 10A

KSD301 10A 250V Bimetal thermostat Normally Closed Temperature Switch Thermosta

KSD301 Temperatuurschakelaar Bedieningssensor Thermische thermostaat 50°-160° klompvoet

Productbeschrijving
KSD301 thermostat is a small temperature controller. Its working temperature performance is fixed, no adjustment is required, crisp, reliable, no arcing, long service life, and less radio interference. It is mainly used in disinfection cabinets, electric water bottles, coffee pots, electronic tile supports, hot water bags, water dispensers, hair dryers, stofzuigers, electric heaters, microwave ovens, elektrische strijkijzers, clothes dryers, motors and other electrical appliances.

Current Ratinf(En): 5A,10A,15A 16A;
Spanningswaarde(Ur):125V 250V ac;
Tf Tolerance: ±5℃
Elektrische intensiteit: AC2000V 50/60Hz
Contactweerstand: less than 50mΩ
Isolatieweerstand: more than 100MΩ
Reactiesnelheid: ≤1℃/min
Life time: more than 30000 cycli
Goedkeuringen: UL TUV CQC

Actietemperatuur(Tf) & Reset Temperature(Tr)

Dimension of KSD301 Bimetal Thermostat Temperature Switch Thermal control Switch

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Upright Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Movable Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, Fixed Bracket

KSD301 Bimetallic Bimetal thermostat Normally Open/Normal Closed Horizontal Terminal, no bracket

KSD301 Temperature Control Switch Upright Terminal, no bracket

What’s the difference between NC and NO?
Normaal gesloten: the thermostat is closed(connected) at normal status
Normaal geopend: the thermostat is open(disconnected) at normal status

Please Note :
During installation, the switch should be completely fixed close to the mounting surface of the tested appliance.
Do not collapse or deform the plastic / metal shell during installation.
For metal temperature controller, do not remove the insulating sleeve to avoid electric leakage.
Not suitable for air temperature sensing, only applied to contact sensing.

Standaardpakket
100stuks per zak

Verzending Termijn:
EXW, DDU, DDP, C&F, FOB

Verzendmethoden:
Internationale Express, Per lucht, Over zee