English
العربية
Български
粤语
中文(简体)
中文(漢字)
Nederlands
Suomi
Français
Deutsch
Ελληνικά
Magyar
Italiano
日本語
한국어
Polski
Português
Română
Русский
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Tiếng Việt
recente berichten
UMI TAM 250V 1A, 2A, 3A, 5A Ceramic Thermal Cutoff Fuse Link
UMI TAM temperature fuse is also called thermal fuse. It is a safety overheat protection component. It is generally installed in electrical products that are prone to heat. When the electrical appliance overheats and the temperature exceeds the abnormal temperature, the temperature fuse will automatically melt and cut off the power supply to prevent the electrical appliance from causing a fire. Under normal circumstances, the temperature fuse only serves as a power supply path in the circuit. If it does not exceed its rated value during use, it will not be melted and will not have any effect on the circuit. Only when the electrical product fails or produces abnormal temperature will it be melted to cut off the power circuit. This is different from the current fuse (current fuse), which melts due to the heat generated when the rated current is exceeded in the circuit.
 UMI Microtemp Thermal Fuse Axial Type Cutoff 2A 250V |
 UMI Microtemp Thermal Fuse Axial Type 122 TF Cutoff |
 Original Tam Umi Vs16 1A 2A 3A 5A 250V Thermal Cut off Fuse |
Specificaties
| P/N | Tf
(℃) |
Ta
(℃) |
Th
(℃) |
Tm
(℃) |
En | Ur |
| T0F | 76 | 72±3 | 55 | 200 | 1A | AC 250V |
| T1F | 86 | 81±2 | 60 | 200 | 1A | AC 250V |
| T2F | 102 | 98±3 | 75 | 200 | 2A | AC 250V |
| T3F | 115 | 111±2 | 95 | 200 | 2A | AC 250V |
| T4F | 127 | 123±2 | 110 | 200 | 2A | AC 250V |
| T7F | 145 | 140±2 | 125 | 200 | 1A | AC 250V |
Temperature Rating (Tf):Rated opening temperature
Action Temprature (Ta): Actual measured opening temperature
Holding temperature (Th):Maximum temperature measured at the case end ofthe thermal cutoff at which the thermal cutoff can be maintained for a period for 168 hours without opening.
Maximum temperature (Tm):The maximum temperature at which a thermal cutoff can be maintained for10 minutes as an open circuit and can then be maintained at twice rated voltage for a period of 2 minutes during which its mechanical and electrical properties will not be impaired
Productbeschrijving
| Item | thermische zekering, thermal cutoff, thermal link |
| Brand | UMI |
| P/N | T1F |
| Lead Dia | 0.7mm |
| Lead Length | 68+68mm |
| Spanningswaarde | 250V AC |
| Huidige score | 1A |
| Opening Temp | 86C |
| Montagetype | axiaal geleid |
| Body Dia | 2mm |
| Body Length | 6.3mm |
| Certifications | UL cUL VDE CCC KC |
Dimension
Ceramic Thermal Cutoff Fuse Link Dimension
| Leads Type | Length(mm) | ||||
| A | B | C | D | E | |
| T-F | 6.3±0.3 | 2.0±0,1 | 2.3 | 0.53±0.05 | 68±3.0 |
| T-F(C) | 6.3±0.3 | 2.0±0,1 | 2.3 | 0.53±0.05 | 38±3.0 |
Neem contact met ons op
Wachten op uw e-mail, wij zullen u binnen antwoorden 12 uur met waardevolle informatie die u nodig had.
GERELATEERDE PRODUCTEN
250v 2a /10a Thermal cut link for Table fan/ Blender
Thermal fuse can sense the overheating generated by abnormal operation of electrical and electronic products, thereby cutting off the circuit to avoid fire. Commonly used in: hair dryers, elektrische strijkijzers, rijstkokers, elektrische kachels, transformatoren, motors, water dispensers, coffee pots, enz. The thermal fuse cannot be used again after operation, and only operates once at the melting temperature.
Tamura/NEC SF metalen behuizing 15A Temperatuurzekering
Het werkingsprincipe van de AUPO / Tamura / De thermische zekering NEC SF is gebaseerd op de thermische uitzetting en geleidende eigenschappen van het materiaal. Wanneer de temperatuur in het circuit stijgt tot de nominale triggertemperatuur van de zekering, het metalen materiaal van de zekering zal door hitte uitzetten. Wanneer deze expansie een bepaald niveau bereikt, het zal ervoor zorgen dat de weerstand in de zekering scherp stijgt.