Kategorie produktów
- termistor 1
- Uchwyt bezpiecznika do montażu na płytce drukowanej 27
- Wiązka przewodów 1
- Uchwyty bezpieczników ostrza 17
- termostat 34
- Bezpiecznik elektryczny 14
- Thermal Circuit Breaker 20
- Uchwyt skrzynki bezpieczników 36
- Czujnik temperatury 30
- Wyłącznik termiczny 58
- Bezpiecznik samochodowy 19
- Przykręcić bezpieczniki 7
- bezpiecznik termiczny 29
- bezpieczniki do montażu powierzchniowego 12
Tagi produktów
czujnik z termoparą pancerną
Uchwyt bezpiecznika ostrza
Bezpiecznik ostrza samochodowego
Bezpiecznik samochodowy
Bezpiecznik rurowy ceramiczny
Wyłącznik automatyczny
Termostaty dyskowe
Czujnik temperatury DS18b20
Bezpiecznik elektryczny
Bezpiecznik szybki/wolny
Uchwyt skrzynki bezpieczników
Bezpiecznik szklany
Wbudowany uchwyt bezpiecznika
Limit Snap Disc Thermostat
Mini Circuit Breakers
Zabezpieczenie przed przeciążeniem silnika
Zabezpieczenie termiczne silnika
Czujnik NTC
Czujnik termistorowy NTC
Uchwyt bezpiecznika do montażu na płytce drukowanej
Bezpiecznik resetowalny PPTC
PT100 Czujnik temperatury
Termistor PTC
wiązka złącza czujnika
Sondy czujnikowe & Kable
Mikrobezpiecznik zwłoczny
Bezpieczniki do montażu powierzchniowego
Łącze odcięcia temperatury
Przełącznik kontroli temperatury
Bezpiecznik temperaturowy
Czujnik temperatury
Kabel czujnika temperatury
Sonda czujnika temperatury
przełącznik temp
Odcięcie termiczne
Wyłącznik termiczny
Bezpiecznik termiczny
ochraniacz termiczny
Wyłącznik termiczny
Sonda czujnika termistora
Hair dryer SEKI ST-12 snap action thermal switch
The overheating protection SEKI ST-12 of the hair dryer is a temperature controller using a bimetal as a temperature sensing component. Prevent overheating and burnout of the heating wire when the hair dryer is running for a long time.
The overheating protection SEKI ST-12 of the hair dryer is a temperature controller using a bimetal as a temperature sensing component. Prevent overheating and burnout of the heating wire when the hair dryer is running for a long time.
When the hair dryer works normally, the bimetal is in a free state and the contacts are in a closed / open state. When the temperature reaches the operating temperature, the bimetal will quickly act upon the internal stress caused by the heat, opening / closing the contact and cutting / connecting the circuit, thereby controlling the temperature. When the appliance cools down to the reset temperature, the contacts are automatically closed / opened to resume normal working conditions.
The following points should be noted when installing anti-overheating protection SEKI ST-12:
1. When using contact temperature-type installation, the metal cover should be close to the installation surface of the controlled appliance. In order to ensure the effect of temperature sensing, the surface of temperature sensing should be coated with thermal grease or other thermally conductive medium with similar properties.
2. Do not collapse, loosen or deform the top of the cover during installation, so as not to affect the performance.
3. Do not allow liquid to penetrate into the thermostat, do not make the shell crack, and do not change the shape of the external terminal at will.
4. The product is used in a circuit with a current not greater than 5A, and the copper core cross section should be selected as 0. 5-1㎜2 wire connection; For use in circuits with a current not greater than 10A, the copper core cross section should be 0.75-1.5㎜2 wire connection.
5. The product should be stored in a warehouse with a relative humidity of less than 90%, an ambient temperature below 40 ° C, ventilated, clean, dry and non-corrosive gas
product description
model:
ST-12 series temperature switch Scope
⑴ hair dryer,
⑵ curlers,
⑶ oven,
⑷ electric heaters,
⑸ popcorn machine,Overheating protection SEKI ST-12
⑹ tableware dryer temperature protection, and other products.
● ST-12 Series Temperature Switch Description:
ST-12 Series Temperature Switch Technical Data
Rated temperature Off temperature Rated temperature Off temperature
55℃ 55±5℃ 105℃ 105±5℃
60℃ 60±5℃ 110℃ 110±5℃
65℃ 65±5℃ 115℃ 115±5℃
70℃ 70±5℃ 120℃ 120±5℃
75℃ 75±5℃ 125℃ 125±5℃
80℃ 80±5℃ 130℃ 130±5℃
85℃ 85±5℃ 135℃ 135±5℃
90℃ 90±5℃ 140℃ 140±5℃
95℃ 95±5℃ 145℃ 145±5℃
100℃ 100±5℃ 150℃ 150±5℃
Reset temperature: When below 75 ℃, operating temperature, operating temperature reset temperature of minus 20 ℃ ± 15 ℃
When the operating temperature at 75 ℃ ~ 100 ℃, operating temperature reset temperature of minus 30 ℃ ± 15 ℃
When the operation temperature above 100 ℃, operating temperature reset temperature is minus 40 ℃ ± 15 ℃
Rated voltage (V) Rated Current (A)
10125250571015
By certified
⑴ the thermal protection adapted for relative humidity less than 90℅, non-flammable gas and conductive dust exist in general indoor environment.
⑵ thermal protector in the installation process, do not pull pressure shrapnel thermal sensor in order to avoid poor contact, inaccurate temperature.
⑶ prevent dangerous over-temperature components under fault conditions to avoid accidents.
Skontaktuj się z nami
Czekam na Twój e-mail, odpowiemy Ci w ciągu 12 godziny z cennymi informacjami, których potrzebujesz.
POWIĄZANE PRODUKTY
Chiny Producenci przełączników termicznych
Co to jest wyłącznik termiczny?
Przełącznik termiczny opiera się na środowisku pracy zmian temperatury, wewnątrz produktu następuje fizyczne odkształcenie, element sterujący, który jest automatycznie włączany lub wyłączany, znany również jako przełącznik kontroli temperatury, ochrona termiczna, regulator temperatury i tak dalej. Powszechnie stosowanymi metodami kontroli temperatury są:
CREEP ACTION THERMOSTAT, MOTOR PROTECTOR
VA1/VAA1 replaces the PEPI creep action thermostat bimetal thermal protector with higher current sensitivity:
[The PEPI CREEP ACTION THERMOSTAT] VAA1 adopts bimetallic control, and the inside is a low-resistance circuit with gold-plated contacts. Constant temperature control design and small size. It is suitable for electric blankets, electric heating pads and all kinds of small household appliances that require constant temperature function.
Defrost Low Temperature Thermal Cutoff Switch
Defrost Thermal Cutoff Switch Feature:1. Use the defrost temperature control switch + thermal fuse harness : Refrigerators are generally equipped with a cooling regulator. Users can adjust the temperature inside the refrigerator by turning the knob of the cooling regulator. Generally speaking, the temperature adjustment range is 1℃-7℃, and users can adjust it freely according to their needs.
KSD301 250V 10A NC / Przełącznik kontroli temperatury termostatu NO
Termostat bimetaliczny zatrzaskowy serii KSD301 jest rodzajem miniaturowego, hermetycznie uszczelnionego termostatu bimetalicznego. (1/2" dysk). Szeroko stosowany do kontroli temperatury lub ochrony domowych urządzeń elektrycznych. Wykonane z wysokiej jakości stopu, ten przełącznik został zbudowany tak, aby wytrzymać trudy codziennego użytkowania i utrzymać swoją wydajność przez długi czas. Ma konstrukcję jednobiegunową, jednorzutową i pracuje pod obciążeniem rezystancyjnym. Termostat bimetaliczny KSD301 jest szeroko stosowany w szerokiej gamie kompaktowych domowych urządzeń elektrycznych.