Product Categories
Product Tags
armored thermocouples sensor
blade Fuse Holder
Car blade fuse
Car Fuse
Ceramic Tube Fuse
Circuit Breaker
Disc Thermostats
Ds18b20 Temperature Sensor
electrical Fuse
Fast/slow-blow fuse
Fuse box-holder
Glass Tube Fuse
Inline Fuse Holder
Limit Snap Disc Thermostat
Mini Circuit Breakers
Motor overload protector
Motor thermal protection
NTC sensor
NTC thermistor sensor
PCB Mount Fuse Holder
PPTC Resettable Fuse
PT100 Temperature sensor
PTC thermistor
sensor connector harness
Sensor Probes & Cables
single-stage capillary thermostat
Slow Blow Micro Fuse
Smart Thermostat
Surface Mount Fuses
Temp Cutoff Link
Temperature control switch
Temperature Fuse
Temperature Sensor
Temperature sensor cable
Temperature Sensor Probe
temp switch
Thermal cut-off
Thermal Cut out Switch
Thermal Fuse
thermal protector
Thermal switch
Thermistor Sensor Probe
Recent Posts
German McCormick Thermik S06 120.05 150.05 125.05 motor thermostat switch
Product series: ST06 motor thermostat switch Replaces German McCormick Thermik S06 S06 120.05 150.05 125.05
Electrical parameters: 6,3 A ~ 25 A
Normal closed;
Automatic reset;
With connecting wire;
Normal closed;
Automatic reset;
With connecting wire;
Polyester film – Nomex paper insulation;
Product series: ST06 motor thermostat switch Replaces German McCormick Thermik S06 S06 120.05 150.05 125.05
Electrical parameters: 6,3 A ~ 25 A
Normal closed;
Automatic reset;
With connecting wire;
Polyester film – Nomex paper insulation;
Main components of ST06 U1 thermal protector:
1) Ceramic cover 2) Static contact 3) Riveted shaft pin 4) Bimetallic strip 5) Pot 6) Moving contact 7) Shell
Connection structure
The static contact and ceramic cover are riveted together;
The moving contact, bimetallic strip and pot are riveted together through the shaft pin;
The moving contact is in close contact with the static contact under the pre-pressure of the pot; The current passes through the static contact and the moving contact to form a circuit.
Working principle
When the circuit is working normally, the moving contact and the static contact are in a closed state. When the temperature rises to the operating temperature, the bimetallic strip is deformed by the heat and quickly flips over, and moves downward with the pot piece through the riveted shaft pin, so that the moving contact piece and the static contact are separated and the circuit is cut off. After the circuit is cut off, the ambient temperature begins to drop. When it drops to the reset temperature, the bimetallic strip automatically flips back to the initial state, and the pot piece also rebounds to the initial state, so that the moving contact piece and the static contact are reconnected, and the circuit returns to normal working state.
S06 Thermik motor thermostat switch is applicable to Electric equipment, Small motor, Transformers, Lighting, electric product, household appliance, the protection of temperature control, thermal overload in circuit board, Communication power supply , switching power supply,UPS power supply, medical power supply, fire power ,the module power supply ,audio amplifier equipment, various types of rechargeable devieces, rectifiers, inverters, welding equipment ,aerospace instrumentation electronic equipment , automation equipment ,military, Commercial product temperature control or temperature protection.
S06Imported series temperature protectionTechnical parameters:
Rated voltage:50 / 60HZ, 250V, AC
Rated current:2.5 (1.6) A / 10 (6.3) A COS phi = 1.0 (0.6)
Rated disconnect temperature range:60~ 200Each5For a file
Reset temperature range: Disconnect the temperature is below30 15K
Authenticate:UL,VDE,SGS
Model | S01 | S06 |
Contact types | Normally closed/Normally open | Normally closed/Normally open |
Rated switching temperature (NST) Each5A | 35℃-200℃ | 35℃-200℃ |
Standard Tolerances | 5K | 5K |
Reset temperature range | 30K 15K | 30K 15K |
Applying a voltage…AC… /DC | … 500V ~ / … 100V ~ = | … 500V ~ / … 100V ~ = |
Rated voltage, AC | 250V 500V | 250V 500V |
Rated current, ACCOS = 1.0 | 2.5A 0.75A | 10.0A 3.5A |
Rated current, ACCOS = 0.6 | 1.6A 0.50A | 6.3A 2.0A |
InInAndUnWhen switching times | 10.000 | 10.000 |
Maximum switching current250V ~ /Switching times | 5.0A / 2000 | 25A / 2000 |
Contact bounce time | <1ms | <1ms |
Contact resistance(ReferenceMIL-Stand, R5757) | <50m | <50m |
Immersion resistance(According toThermikTest) | Suit | Suit |
Seismic capacity10-60Hz | 100m / s2 | 100m / s2 |
Protection level | 1 | 1 |
Standard connection | Lead0.25mm2 | Lead0.75mm2 |
Diameterd (There is/Without insulating sleeve) | 9.4 / 9.0mm | 9.8 / 9.3mm |
Heighth (There is/Without insulating sleeve) | 4.8 / 4.3mm | 7.5 / 7.2mm |
Insulating sleeve length | 16mm | 18 |
Contact Us
Waiting for your email, we will reply you within 12 hours with valuable information you needed.
RELATED PRODUCTS
Motor thermal protector
A temperature control switch using a bimetallic sheet as a temperature sensing element:
Motor thermal protector KSD9700, 8AM, 3MP, 6AP, 5AP, 2MP series products are a thermostat that uses a bimetallic sheet as a temperature sensing element. When the electrical appliance is working normally, the bimetallic piece is in a free state and the contacts are in a closed/open state.
Replacement Hi-limit Cut off Thermostat & Resettable Thermal Switch
KSD301, KD302, KSD306, KD308 Hi-limit Cut off Thermostat & Resettable Thermal Switch When the circuit is working properly, the contacts are in a closed state. When the rated operating temperature is reached, the bimetal is deformed by heat and breaks quickly, cutting off the circuit. After that, the device begins to cool down.