Categorias de Produtos
- Porta-caixa de fusíveis 36
- Sensor de temperatura 30
- Interruptor térmico 58
- Fusível do carro 19
- Fusíveis aparafusados 7
- fusível térmico 29
- fusíveis de montagem em superfície 12
- termistor 1
- Suporte de fusível para montagem em PCB 27
- Chicote de fiação 1
- Porta-fusíveis de lâmina 17
- termostato 34
- Fusível elétrico 14
- Disjuntor térmico 20
Etiquetas de produto
sensor blindado dos termopares
porta-fusível da lâmina
Fusível da lâmina do carro
Fusível do carro
Fusível de tubo cerâmico
Disjuntor
Termostatos de disco
Sensor de temperatura Ds18b20
Fusível elétrico
Fusível de ação rápida/lenta
Porta-caixa de fusíveis
Fusível de tubo de vidro
Porta-fusível em linha
Termostato de disco instantâneo de limite
Minidisjuntores
Protetor de sobrecarga do motor
Proteção térmica do motor
Sensor NTC
Sensor termistor NTC
Suporte de fusível para montagem em PCB
Fusível reajustável PPTC
Sensor de temperatura PT100
Termistor PTC
chicote do conector do sensor
Sondas de sensores & Cabos
Microfusível de sopro lento
Fusíveis de montagem em superfície
Link de corte de temperatura
Interruptor de controle de temperatura
Fusível de temperatura
Sensor de temperatura
Cabo do sensor de temperatura
Sonda do sensor de temperatura
interruptor de temperatura
Corte térmico
Interruptor de corte térmico
Fusível Térmico
protetor térmico
Interruptor térmico
Sonda do sensor termistor
Bimetal Overload Thermal Protection for Three /Single Phase AC/DC Motor
Hi-Amp motor bimetal overload thermal protection switch are installed in motor circuits, and the current going to the motor passes through the bimetallic tripping element. The most salient feature of 17AM / KSD9700 / TB / 6AP/ 3MP/ 5AP series thermal overload switch / motor thermal protection switch is small volume and large current carrying capacity.
Hi-Amp motor bimetal overload thermal protection switch are installed in motor circuits, and the current going to the motor passes through the bimetallic tripping element. The flowing current heats the bimetallic strip which causes the bimetallic material to bend, and after a specific temperature, the bimetallic strip will open the thermal protection switch. The most salient feature of 17AM / KSD9700 / TB / 6AP/ 3MP/ 5AP series thermal overload switch / motor thermal protection switch is small volume and large current carrying capacity.
High Light: motor Bimetal Overload Thermal Protection switch
thermo switch protector for floor heating
BW series thermal protector’s Principle and structure
BW series thermal protector is to use a certain geometry of bimetallic strip, without auxiliary institutions, only by bimetallic strip their own sense of mild heating current, rapid changes in the state of bimetallic element, direct drive contact automatic cutting and processing circuit, overheat protection, overload protection.
BW series thermal protector’s application
It is widely applied in Electric motors and electrical equipment as electric blanket, hot wall, washer motor, soybean milk machine motor, Fan motor, air condition motor, fractional motor, direct current motor, AC brushless motor, water pump, transformer, rectifier, lighting, rechargeable battery,electric heating appliance etc.
BW series thermal protector’s specification
1. Contact’s type: Normally closed and Normally open
2. Electrical rating: 10A/AC120V; 8A/AC250V; 10A/AC250V; 16A/AC250V
3. Circuit resistance: ≤50mΩ (Initial value)
4. Insulation resistance: ≥100mΩ
5. Action temperature range: 40~150℃
6. Case: metal case and plastic case
7. Life: ≥10,000 times
8. Size:
9. Open temperature and reset temperature sheet
Model | L(milímetros) | W(milímetros) | H(milímetros) | Electrical rating | Lead wire (milímetros) |
BW metal | 20 | 7.5 | 3.8 | 5A/250V;10A/250V | AWG#22,AWG#18 high temperature silicone wire L1=L2=70mm, or according to customer’s requirement. |
20 | 8.0 | 4.1 | 16A/250V | ||
BW plastic | 20 | 8.0 | 4.0 | 5A/250V;10A/250V |
Code | Open temp. | Reset temp. | Code | Open temp. | Reset temp. |
40 | 40℃±5℃ | ≥30℃ | 100 | 100℃±5℃ | 70±10℃ |
45 | 45℃±5℃ | ≥30℃ | 105 | 105℃±5℃ | 70±12℃ |
50 | 50℃±5℃ | ≥30℃ | 110 | 110℃±5℃ | 75±12℃ |
55 | 55℃±5℃ | ≥30℃ | 115 | 115℃±5℃ | 80±12℃ |
60 | 60℃±5℃ | 40±10℃ | 120 | 120℃±5℃ | 85±12℃ |
65 | 65℃±5℃ | 45±10℃ | 125 | 125℃±5℃ | 90±12℃ |
70 | 70℃±5℃ | 50±10℃ | 130 | 130℃±5℃ | 95±12℃ |
75 | 75℃±5℃ | 55±10℃ | 135 | 135℃±5℃ | 100±12℃ |
80 | 80℃±5℃ | 60±10℃ | 140 | 140℃±5℃ | 105±12℃ |
85 | 85℃±5℃ | 65±10℃ | 145 | 145℃±5℃ | 110±12℃ |
90 | 90℃±5℃ | 70±10℃ | 150 | 150℃±5℃ | 115±12℃ |
95 | 95℃±5℃ | 75±10℃ |
BW Thermal protector’s competitive advantage
1. Small size and easy installation
2. Quick bimetallic strip, fast reaction
3. The life time high than 10,000 times
4. Prevention again leak of vacuum impregnation process
5. Replacer of SENSATA 17AM 7AM, SEKI ST-22 etc.
Contate-nos
Aguardando seu e-mail, responderemos dentro de 12 horas com informações valiosas que você precisava.
PRODUTOS RELACIONADOS
China Custom Limit Disc Thermostat Control Switches Therm o-Disc
Snap Disc, ou 3/4" Limit switch thermostats (KSD301/KSD302/KSD304/KSD308) are bimetal mechanical thermostats that function via the thermal expansion and contraction of a bimetal disc that “snaps” from a convex to a concave shape at a set temperature. carrying up to AC 110V/400V, 10A-60A amps-240 Volts, Action mode: automatic reset, manual reset (normally open/normally closed).
China SPST Bimetal Limit Snap Thermal Switch Supplier
SPST-NO/NC Bimetal thermal switch Applications include electric motors, heater, transformadores, thermal coils, electronics, HVAC, and white goods. China Custom Limit Snap bimetal thermal switch (250v 10a / 125v 16a) is a temperature sensing device which is made with a formed 1/2′′ or 3/4′′ bi-metal disc that “snaps” at a preset temperature.
Motor thermal protector
A temperature control switch using a bimetallic sheet as a temperature sensing element:
Motor thermal protector KSD9700, 8AM, 3MP, 6PA, 5PA, 2MP series products are a thermostat that uses a bimetallic sheet as a temperature sensing element. When the electrical appliance is working normally, the bimetallic piece is in a free state and the contacts are in a closed/open state.