Fornecedor de interruptor térmico de pressão de limite bimetálico SPST da China

SPST-NO/NC Chave térmica bimetálica As aplicações incluem motores elétricos, aquecedor, transformadores, bobinas térmicas, eletrônica, AVAC, e produtos da linha branca. Interruptor térmico bimetálico personalizado China Limit Snap (250v. 10a / 125v. 16a) é um dispositivo sensor de temperatura feito com um disco bimetálico formado de 1/2 ′ ′ ou 3/4 ′ ′ que “encaixa” a uma temperatura predefinida. YAXUN KSD9700, ST-22, TB02 Series Bimetal Snap-Action Temperature Switches are based on a bimetal snap disc two-contact system with response sensitivity to a combination of temperature and current. The functions of these switches include thermal motor protection, temperature limiting, and thermal cut-off. The series features high power ratings and no vibrational noise, with availability in normally closed or normally open configurations. The KSD302/17AM/6ap/S06/S01 Series switches are sealed so they can be used in vacuum-impregnated applications with various varnishes and glues. The rated maximum currents are 6.3A (type T12) with maximum switching currents of 60A. A low tolerance of ±1K is possible with the T10 models. KSD302 Series Bimetal Snap-Action Temperature Switches are available in a wide range of packaging, mounting, and design options and can be wired in twin or triplet configurations.

Limit Snap Thermal Switch THERMOSTAT 37DEG C SPST-NC Senser

Sonda de chave térmica bimetálica para proteção contra superaquecimento do motor

Bimetálico do interruptor de temperatura do disco da restauração manual que projeta o interruptor térmico de 25a~60 ampères

KSD301, KSD302, KSD303 Series Limit Snap Thermal Switch
Aplicativos
⑴ sterilizer,
⑵ dishwasher,
⑶ dryer,
⑷ microwave,
⑸ drinking fountains,
⑹ electric kettle,
⑺ office equipment,
⑻ coffee maker,
⑼ sandwich toaster,
⑽ car seat heaters, automobile antifreeze, electric cooker, refrigerator, air conditioner, laminator and other electric appliances.

Manual Reset Disc Temperature Switch Bimetal Thermal Switch installation dimensions

●KSD301, KSD302, KSD303 series Limit Snap Thermal Switch technical parameters
⑴ parâmetros elétricos: 1) CQC, TUV, UL, CUL AC250V 50 ~60Hz 5A / 10UM / 16UM (carga resistiva)
2) UL AC125V 50Hz 16A (carga resistiva),
Temperature Performance
Normalmente fechado, operating temperature：170±3℃ ；Redefinir temperatura: ON: 155±5.
⑵ faixa de temperatura operacional: 0-230 ℃ (opcional), precisão de temperatura: ± 2 ± 3 ± 5 ± 10 ℃
⑶ reply and action temperature difference: 8 ~ 100 ℃ (opcional)
⑷ Conexão: terminais de plugue 250 # (dobrar 0 ~ 90 ° opcional); terminais de plugue 187 # (dobrar 0 ~ 90 ° optional thickness 0.5,0.8mm optional)
⑸ vida: ≥ 100,000 vezes
⑹ resistência elétrica: AC 50Hz 1800V durou 1min, sem cintilação, sem avaria
⑺ contact resistance: ≤50mΩ
⑻ Resistência de isolamento: ≥100MΩ
⑼ Formulário de contato: Normally closed type: aumento de temperatura, contatos abertos, a temperatura cai, contato conectado;
Tipo normalmente aberto: aumento de temperatura, contato conectado, a temperatura cai, the contact is open
⑽ grau de proteção de casca: IP00
Instalação: Anel de atividades comuns de instalação da série KSD301, anel instalar pequenas atividades redondas, instalação de anel ativo de tela plana, ordinary large aluminum cover with mounting holes, with mounting holes lengthened aluminum cover.

●KSD301, KSD302, KSD303 series Limit Snap Thermal Switch competitive advantage
⑴ desempenho estável
⑵ alta precisão
⑶ tamanho pequeno, peso leve
⑷ alta confiabilidade, vida longa
⑸ dry worries small radio
⑹ no arc

●KSD301, KSD302, KSD303 series Limit Snap Thermal Switch Notice
⑴ grounding: The thermostat metal cover metal parts connected to the equipment grounding.
⑵ when using contact temperature installation should be charged with snapping the metal to cover up the installation of surface equipment, to ensure that the temperature effect, should be coated with thermal grease or other properties like heat transfer medium in surface temperature.
⑶ not install when the top cover surface collapsed, loose or deformed, so as not to affect performance.
⑷ not allow liquid to penetrate the internal temperature, not cause the shell cracks, not free to change the shape of the external terminals.
⑸ product in less than 5A current of the circuit used, should be selected cross-section of 0.5 5-1㎜2 copper wires; not more than 10A current in the circuit, chose the copper wires cross-section 0.75-1.5㎜2 .
⑹ product should be less than 90% relative humidity, ambient temperature below 40 ℃ ventilated, limpar, dry, non-corrosive gases stored in the warehouse.
⑺ use can not bend the terminals, otherwise it will affect the reliability of the electrical connections.

KSD301 OPEN TEMP&RESET TEMP

CODE	OPEN TEMP	RESET TEMP	CODE	OPEN TEMP	RESET TEMP
45	45±5°C	≥33°C	140	140±5°C	100±15°C
50	50±5°C	≥35°C	145	145±5°C	100±15°C
55	55±5°C	42±6°C	150	150±5°C	105±15°C
60	60±5°C	45±8°C	155	155±5°C	110±15°C
65	65±5°C	48±10°C	160	160±5°C	115±15°C
70	70±5°C	50±12°C	165	165±5°C	120±15°C
75	75±5°C	53±14°C	170	170±3°C	155±5°C
80	80±5°C	55±15°C	175	175±5°C	130±15°C
85	85±5°C	60±15°C	180	180±5°C	135±15°C
90	90±5°C	65±15°C	185	185±5°C	140±15°C
95	95±5°C	70±15°C	190	190±5°C	145±15°C
100	100±5°C	70±15°C	195	195±5°C	150±15°C
105	105±5°C	75±15°C	200	200±5°C	155±15°C
110	110±5°C	75±15°C	205	205±5°C	160±15°C
115	115±5°C	80±15°C	210	210±5°C	165±15°C
120	120±5°C	85±15°C	215	215±5°C	170±15°C
125	125±5°C	85±15°C	220	220±5°C	175±15°C
130	130±5°C	90±15°C	225	225±5°C	180±15°C
135	135±5°C	95±15°C	230	230±5°C	185±15°C