Categorii de produse
- Siguranta electrica 14
- Întrerupător termic 20
- Suport cutie siguranțe 36
- Senzor de temperatura 67
- Comutator termic 64
- Siguranță auto 19
- Siguranțe înșurubate 7
- siguranță termica 32
- siguranțe de suprafață 12
- termistor 22
- Suport pentru siguranțe montat pe PCB 27
- Ham de cabluri 6
- Suporturi pentru siguranțe cu lame 17
- termostat 46
Etichete de produs
Postări recente
NTC Sensor for Thermostat Temperature Controller air Conditioner, Refrigerator
Custom 5K 10K 15K 20K 25k 50K 100K NTC thermistor sensors ( rubber head copper head sensor probe Kit ) are used to measure the temperature of the HVAC, Freezer, evaporator and of the conditioned interior. An air-conditioning installation can also serve for heating in winter.
Custom 5K 10K 15K 20K 25k 50K 100K NTC thermistor sensors ( rubber head copper head sensor probe Kit ) are used to measure the temperature of the HVAC, Freezer, evaporator and of the conditioned interior. An air-conditioning installation can also serve for heating in winter.
1. The resistance of different types of NTC temperature sensor is different, but how to judge the quality of the temperature sensor? Very simple, it is to measure its voltage online, the normal voltage at 25 degrees is generally between + 2 ~ + 2.5V .
2. Because the human body temperature is constant, the on-circuit voltage is not constant (approximately 2.17V) when holding the temperature-sensing head for a while.
3. Unplug the NTC temperature-sensing head, and measure the resistance of the two pins of the socket on the line. The resistance value is basically the model value of the temperature-sensing head at 25 ℃ (this method is inaccurate after actual inspection). If the resistance is about 8K, the model value of the NTC sensor temperature head is generally 10K; if it is a 4.7K resistance, it is a 5K temperature head; and so on. Cu toate acestea, for some large air conditioners, the resistance value of the NTC temperature sensor of the control board of the inverter air conditioner external unit is 3 times the lower bias resistance, adică, the resistance value measured by the above method multiplied by 3 is the resistance value of the NTC sensor at 25 ° C.
4. The model value of the NTC temperature sensor is its resistance value at 25 ℃, usually 5K, 10K, 15K, 20K, 25k, 50K, 100K which are generally negative temperature coefficient, adică, cu atât temperatura este mai mare, the more the resistance value small.
5. În general vorbind, the temperature of the internal machine tube and the room temperature resistance are the same.
Descriere
TYPE: | NTC thermistor sensors probe | B25/50: | 3950K, 3977K, 3435K |
Sensor Head: | O Ring, Fork Metal, Injected Tube, NPT, M16, tainless Steel Tube | Sârmă: | CL2 PT4,#24 2466,#28 1332 |
Utilizare: | Senzor de temperatura, Instant Water Heaters, water heater, air conditioner, frigider, water fountain, induction cooker, coffee maker | Pn (rated Power): | 50mw |
Lumină înaltă: | EPCOS / AVX / SEMITEC /SUBARA / MITSUBISHI / OHIZUMI NTC thermistor Sensor, 3977K NTC Temperature Sensor, Thermistor Water Temperature Probe |
Custom NTC thermistor sensors probe Wire 3M~10M Theory Signal Output Origin.
Specification Name | Scope | Detection Condition |
R25(nominal resistance value) | 1k, 2k, 2.7k, 3k, 5k, 10k, 15k, 20k, 30k, 40k, 47k, 50k, 100k, 200k (EPCOS / AVX / SEMITEC /SUBARA / MITSUBISHI / OHIZUMI NTC thermistor) | Constant temperature 25℃±0.05℃ |
R25 Permissible variance(%) | ±1,±2, ±3, ±5, ±10 | Constant temperature 25℃±0.05℃ |
B25/50 or B25/85(material coefficient)(thermal-sensitivity index) | 2500~5000K | Constant temperature 25℃±0.05℃
Constant temperature 85℃±0.05℃ |
B25/50 Value permissible variance(%) | ±1,±2 | Constant temperature 25℃±0.05℃
Constant temperature 50℃±0.05℃ |
∫(dissipation coefficient) | ≥0.8mw/℃ | Static in the air |
T(thermal time constant) | ≤25S | Static in the air |
Ta(Temperatura de lucru) | -30℃~+120℃ | |
Pn (rated power) | 50mw | within working temperature |
Case and head | Fork head, O ring head,drops of water head, Metal case, Thread copper case, injection head, tainless Steel Tube, or according to client’s drawing | |
Fir de plumb | #24 30# 2651, UL4411 28#, double wired conductor and so on, sau conform cererii clientului. | |
Terminal | Can be riveted according to the requirements of various terminals |

The sensor’s connection terminal and housing size and lead length can be customized according to customer requirements
Services
1. Your inquiry will be replied within 24 ore;
2. Well-trained and experienced staff are always at your service.
3. Unique design products and many private mold product are waiting for your choice.
4. Strictly protect your private information and your ideas of design.
FAQ
Q1. Can I have a sample order for NTC, PT100,PT1000, RTD-uri, and Ds18b20 SENSOR?
A: Da, we welcome sample order to test and check quality. Mixed samples are acceptable.
Contactaţi-ne
Aștept e-mailul dvs, vă vom răspunde în termen 12 ore cu informații valoroase de care aveai nevoie.