English
العربية
Български
粤语
中文(简体)
中文(漢字)
Nederlands
Suomi
Français
Deutsch
Ελληνικά
Magyar
Italiano
日本語
한국어
Polski
Português
Română
Русский
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Tiếng Việt
Postări recente
TAMURA NEC Microtemp Thermal Fuse TF Cutoff pentru încălzitor uscător
Oprire termică (TCO) este o componentă de protecție împotriva supraîncălzirii. When the temperature inside the device or system exceeds the preset safety value, the TCO disconnects the circuit to prevent damage to the device or fire. This type of fuse is often used in electronic equipment, automobiles, and industrial equipment to provide additional safety. This article summarizes the working principle, structural characteristics, process flow, selection parameters, and design considerations of the thermal fuse.
TAMURA / SETĂ Tipul Pin Up de Siguranță Termică
Notes on the installation of thermal fuse:
1. When using lead bending, it should be bent from a part more than 6 mm from the root; When bending, do not damage the roots and leads, and do not pull, press, or twist the leads forcibly.
2. When the thermal fuse is fixed by screws, riveting or binding posts, it should be able to prevent mechanical creep and poor contact.
3. The connecting parts should be able to work reliably within the working range of the electrical product without displacement due to vibration and shock.
4. When welding the lead wire, the heating humidity should be limited to a minimum, and no high temperature should be applied to the thermal fuse; Do not forcibly pull, press, or twist thermal fuses and leads; After welding, it should be cooled for more than 30 seconds immediately.
5. The thermal fuse can only be used under the conditions of the specified rated voltage, current and specified temperature. Pay particular attention to the maximum continuous temperature that the thermal link can withstand.
Note: Nominal current, lead length and temperature can be Designed according to customer requirements.
N-F Series
Thermal Fuse Features
Fusing temperature thermal fuse accurate, high withstand voltage, small size, and temperature resistance.
Belonging unrecoverable type thermal fuses. Temperature fuse melting off, even if the surrounding temperature falls, it will not be turned on.
Use insulating housing.
No lead (Pb) and cadmium (Cd), and comply with RoHS.
REACH does not contain the specified 46 categories SVHC (SVHC).
Thermal Fuse Size
TAMURA Thermal Fuse
| Cable length | Dimensions (mm) | ||||
| A | B | C | D | E | |
| Standard N-F | 4.1±0.1 | 5.2±0.1 | 2.0±0.1 | 0.53±0.05 | 36±3.0 |
| Long N-F(L) | 4.1±0.1 | 5.2±0.1 | 2.0±0.1 | 0.53±0.05 | 68±3.0 |
| Model | Rated temperature Tf（℃） |
Operating temperature （℃） |
Curent nominal （A） |
Tensiune nominală (V) |
maintaining the temperature Th（℃） |
Maximum temperature limit Tm（℃） |
| N06F | 65 | 61±3 | 1.0 | AC250 | 50 | 200 |
| N0F | 76 | 72±3 | 1.0 | AC250 | 50 | 200 |
| N1F | 86 | 81±2 | 1.0 | AC250 | 60 | 200 |
| N2F | 102 | 98±3 | 1.0 | AC250 | 75 | 200 |
| N3F | 115 | 111±2 | 1.0 | AC250 | 95 | 200 |
| N4F | 127 | 123±2 | 1.0 | AC250 | 105 | 200 |
| N13F | 133 | 129±3 | 1.0 | AC250 | 105 | 200 |
| N5F | 136 | 131±2 | 1.0 | AC250 | 100 | 200 |
| N6F | 139 | 134±2 | 1.0 | AC250 | 110 | 200 |
| N7F |
Contactaţi-ne
Aștept e-mailul dvs, vă vom răspunde în termen 12 ore cu informații valoroase de care aveai nevoie.
PRODUSE ASEMANATOARE
Custom Assembled Thermal cut-off fuse Connector Harness Assembly
Thermal cut-off fuse connector cables are specially used in the wiring harnesses of irons, smart toilets, frigidere, aer conditionat, washing machines, heat guns, mașini de gătit orez, electric kettles, aspiratoare, etc. Without thermal fuse connector harnesses, there is no circuit protection function for home appliances.
SET Square TCO Thermal Fuse use Flat iron
A piece of fusible alloy wire is connected between the two pins of the thermal fuse, which is covered by a special transparent resin square shell. Current can flow from one pin to another. When the temperature around the thermal fuse rises to its set operating temperature, its fusible alloy wire melts and shrinks into a spherical shape, and is attached to the ends of the two pins with the help of surface tension and special resin. In this way, the circuit is permanently cut off.
Tamura/NEC SF metal casing 15A Temperature fuse
The working principle of the AUPO / Tamura / NEC SF thermal fuse is based on the thermal expansion and conductive properties of the material. When the temperature in the circuit rises to the rated trigger temperature of the fuse, the metal material of the fuse will expand due to heat. When this expansion reaches a certain degree, it will cause the resistance inside the fuse to rise sharply.
Thermik Protector termic rotund rezistent la presiune S01
Comutatorul de temperatură (protector termic) produs de compania THERMIK se caracterizează prin dimensiunile reduse, rezistență la stres mecanic extrem de mare, rezistență ridicată la șoc, si stabilitate excelenta. Termistorul PTC se caracterizează prin dimensiuni reduse, raspuns rapid, 4 straturi de protectie, și 3 capete legate în serie. Poate fi îngropat în bobina trifazată a motorului și poate proteja diferite temperaturi.