Категории продуктов
- термистор 1
- Держатель предохранителя для монтажа на печатной плате 27
- Жгут проводов 1
- Держатели лопастных предохранителей 17
- термостат 34
- Электрический предохранитель 14
- Thermal Circuit Breaker 20
- Держатель блока предохранителей 36
- Датчик температуры 30
- Термовыключатель 58
- Автомобильный предохранитель 19
- Закрепить предохранители 7
- термопредохранитель 29
- предохранители для поверхностного монтажа 12
Теги продукта
бронированный датчик термопары
держатель предохранителя лезвия
Автомобильный предохранитель ножа
Автомобильный предохранитель
Керамический трубчатый предохранитель
Автоматический выключатель
Дисковые термостаты
Датчик температуры DS18b20
электрический предохранитель
Быстродействующий/медленно срабатывающий предохранитель
Держатель блока предохранителей
Предохранитель стеклянной трубки
Встроенный держатель предохранителя
Limit Snap Disc Thermostat
Mini Circuit Breakers
Защита двигателя от перегрузки
Тепловая защита двигателя
датчик NTC
Термисторный датчик NTC
Держатель предохранителя для монтажа на печатной плате
Восстанавливающийся предохранитель PPTC
PT100 Датчик температуры
ПТК-термистор
жгут разъемов датчика
Сенсорные зонды & Кабели
Микропредохранитель с медленным срабатыванием
Предохранители для поверхностного монтажа
Ссылка на отключение температуры
Переключатель контроля температуры
Температурный предохранитель
Датчик температуры
Кабель датчика температуры
Датчик температуры
переключатель температуры
Термическое отключение
Тепловой выключатель
Тепловой предохранитель
тепловой протектор
Термовыключатель
Термисторный датчик
Hair dryer SEKI ST-12 snap action thermal switch
The overheating protection SEKI ST-12 of the hair dryer is a temperature controller using a bimetal as a temperature sensing component. Prevent overheating and burnout of the heating wire when the hair dryer is running for a long time.
Категория: Термовыключатель
Теги: Переключатель контроля температуры, Тепловой выключатель, Термовыключатель
The overheating protection SEKI ST-12 of the hair dryer is a temperature controller using a bimetal as a temperature sensing component. Prevent overheating and burnout of the heating wire when the hair dryer is running for a long time.
When the hair dryer works normally, the bimetal is in a free state and the contacts are in a closed / open state. When the temperature reaches the operating temperature, the bimetal will quickly act upon the internal stress caused by the heat, opening / closing the contact and cutting / connecting the circuit, thereby controlling the temperature. When the appliance cools down to the reset temperature, the contacts are automatically closed / opened to resume normal working conditions.
The following points should be noted when installing anti-overheating protection SEKI ST-12:
1. When using contact temperature-type installation, the metal cover should be close to the installation surface of the controlled appliance. In order to ensure the effect of temperature sensing, the surface of temperature sensing should be coated with thermal grease or other thermally conductive medium with similar properties.
2. Do not collapse, loosen or deform the top of the cover during installation, so as not to affect the performance.
3. Do not allow liquid to penetrate into the thermostat, do not make the shell crack, and do not change the shape of the external terminal at will.
4. The product is used in a circuit with a current not greater than 5A, and the copper core cross section should be selected as 0. 5-1㎜2 wire connection; For use in circuits with a current not greater than 10A, the copper core cross section should be 0.75-1.5㎜2 wire connection.
5. The product should be stored in a warehouse with a relative humidity of less than 90%, an ambient temperature below 40 ° C, ventilated, clean, dry and non-corrosive gas
product description
model:
ST-12 series temperature switch Scope
⑴ hair dryer,
⑵ curlers,
⑶ oven,
⑷ electric heaters,
⑸ popcorn machine,Overheating protection SEKI ST-12
⑹ tableware dryer temperature protection, and other products.
● ST-12 Series Temperature Switch Description:
ST-12 Series Temperature Switch Technical Data
Rated temperature Off temperature Rated temperature Off temperature
55℃ 55±5℃ 105℃ 105±5℃
60℃ 60±5℃ 110℃ 110±5℃
65℃ 65±5℃ 115℃ 115±5℃
70℃ 70±5℃ 120℃ 120±5℃
75℃ 75±5℃ 125℃ 125±5℃
80℃ 80±5℃ 130℃ 130±5℃
85℃ 85±5℃ 135℃ 135±5℃
90℃ 90±5℃ 140℃ 140±5℃
95℃ 95±5℃ 145℃ 145±5℃
100℃ 100±5℃ 150℃ 150±5℃
Reset temperature: When below 75 ℃, operating temperature, operating temperature reset temperature of minus 20 ℃ ± 15 ℃
When the operating temperature at 75 ℃ ~ 100 ℃, operating temperature reset temperature of minus 30 ℃ ± 15 ℃
When the operation temperature above 100 ℃, operating temperature reset temperature is minus 40 ℃ ± 15 ℃
Rated voltage (V) Rated Current (A)
10125250571015
By certified
⑴ the thermal protection adapted for relative humidity less than 90℅, non-flammable gas and conductive dust exist in general indoor environment.
⑵ thermal protector in the installation process, do not pull pressure shrapnel thermal sensor in order to avoid poor contact, inaccurate temperature.
⑶ prevent dangerous over-temperature components under fault conditions to avoid accidents.
Связаться с нами
Жду вашего письма, мы ответим вам в течение 12 часы с ценной информацией, которая вам нужна.
СОПУТСТВУЮЩИЕ ПРОДУКТЫ
17am Temperature control + PTC Motor protection switch
Customize the parameters and cables of the 17AM-D+PTC thermal protector, and also process the wire harness to add a thermal fuse. 17AM-D+PTC thermal protector (Texas Instruments KLIXON) is a current-sensitive, temperature-sensing protection device connected in series with the motor coil. The protector changes depending on the coil temperature and motor current.
17am thermal protector switch
17am thermal protector (KLIXON) working principle: 17am Motor Thermal Protector 17am019-031 60-160 Celsius Degree Normally Closed. The working principle of the TI 17AM thermal protector is based on bimetal technology. When the temperature or current increases, the heat generated is transferred to the bimetal strip.
CREEP ACTION THERMOSTAT, MOTOR PROTECTOR
VA1/VAA1 replaces the PEPI creep action thermostat bimetal thermal protector with higher current sensitivity:
[The PEPI CREEP ACTION THERMOSTAT] VAA1 adopts bimetallic control, and the inside is a low-resistance circuit with gold-plated contacts. Constant temperature control design and small size. It is suitable for electric blankets, electric heating pads and all kinds of small household appliances that require constant temperature function.
TB02-BB8D Smallest Battery Thermal switch
The TB02 series thermal protector is a miniature thermal protector independently developed and produced by YAXUN, and has won the world record certificate. It is divided into two forms: pure temperature type and overheating and overcurrent dual protection type. It has high reliability and repeatability.
Three Phase thermal switch
HCET three-phase motor protector temperature switch/current 20A/strong reliability. The HC25 series high-current temperature control switch adopts a pure temperature design to ensure an internal low-resistance circuit. It is suitable for large current circuits such as high-power motors, water pumps, and transformers.