English
العربية
Български
粤语
中文(简体)
中文(漢字)
Nederlands
Suomi
Français
Deutsch
Ελληνικά
Magyar
Italiano
日本語
한국어
Polski
Português
Română
Русский
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Tiếng Việt
Termična varovalka
LEV, BARVILO, Panasonic, Termična varovalka SWC Limiter
Taljeni material, uporabljen v LEAO, BARVILO, Panasonic, Termične varovalke SWC igrajo ključno vlogo pri delovanju toplotnih varovalk in so ena osrednjih komponent celotne naprave.. Glede na značilnosti materiala taline, lahko jih razdelimo v dve kategoriji: nizko tališče in visoko tališče.
Naprave za toplotno ločitev mehanske odpornosti (Serija DF SF 10amp)
Naknadno, napetost med kontaktoma termičnega izklopa in enosmernim tokokrogom se poveča, da se zagotovi odklop enosmernega tokokroga. S pričujočim izumom, težava, da termični izklop v enosmernem tokokrogu ne more učinkovito prekiniti tokokroga, je rešen, in učinek izboljšanja varnosti tokokroga je dosežen.
Metal Thermal Fuse for Limit Temperature Protection
Metal thermal fuse link (thermal cut off ) consists of a sliding contact, a spring, and an electrically nonconductive thermal pellet. Before the limit thermal fuse is activated, current flows from the left lead to the sliding contact and through the metal housing to the right lead. Metal Shell Thermal Fuse Cutoff 250VAC 10A Temperature Fuse link TF 72-250℃ (192℃).
Modeli in aplikacije toplotne izklopne povezovalne varovalke
A thermal fuse is also known as a tmperature fuse, thermal link, thermal cut-out (TCO), or one shot. It is a temperature sensing circuit cut-off device (China custom metal, keramika, square shell thermal fuse). A limitor thermal fuse can sense the overheating generated by abnormal operation of electrical and electronic products, s čimer prekinete tokokrog, da preprečite požar.
Motor Aupo Axial Thermal Cutoff
rf 250v 10a, 250v / 20A 216 Celzija Temperatura izklopa tokokroga Termična varovalka Keramika AUPO, RY, RH, BARVILO, SEFUSE, NASTAVI, Emerson, NEC
SET Square TCO Thermal Fuse use Flat iron
A piece of fusible alloy wire is connected between the two pins of the thermal fuse, which is covered by a special transparent resin square shell. Current can flow from one pin to another. When the temperature around the thermal fuse rises to its set operating temperature, its fusible alloy wire melts and shrinks into a spherical shape, and is attached to the ends of the two pins with the help of surface tension and special resin. Na ta način, tokokrog je trajno prekinjen.
Set square Thermal Limit Cutoffs Fuse use for Coffee maker
NASTAVI / sedi / RY / Uchibashi The thermal fuse is a thermal protection device designed for electronic equipment to provide overheating protection. It adopts a tubular structure, and the spiral melt material is an alloy, which has the characteristics of fast melting. The model of this fuse is BF216, which is small in size and suitable for a variety of electronic equipment.
Tamura/NEC SF metal casing 15A Temperature fuse
The working principle of the AUPO / Tamura / NEC SF thermal fuse is based on the thermal expansion and conductive properties of the material. When the temperature in the circuit rises to the rated trigger temperature of the fuse, the metal material of the fuse will expand due to heat. When this expansion reaches a certain degree, it will cause the resistance inside the fuse to rise sharply.
Razlika med termično varovalko in termičnim izklopnim stikalom
A “thermal fuse link (Fusible alloy wire and Organic thermal fuse )” is essentially a one-time fusible cut off, heat-sensitive component that permanently breaks a circuit when it reaches a specific temperature. while a “thermal cutoff switch” is a bimetallic strip device that can potentially cut off itself after reaching a high temperature, allowing the circuit to reconnect once the temperature drops below a set point.