Bimetalni grelni termostat KST za stikalo za nadzor temperature električnega grelnika

Bi-Meta termostat KST Stikalo za nadzor temperature z nastavitvijo temperature 60°C~250°C nosilnost 16A/250VAC. Bimetalni linijski napetostni termostat je zasnovan za uravnavanje natančne temperature v komerciali, industrijski, in kmetijske nastavitve. Pogosto se uporablja v električnih grelnikih, Električni likalnik, Cvrtnik, Kuhalnik riža, Toaster, Cvrtnik na maščobi, Topla električna luč, Pečica in tako naprej.

Name:	Adjustable Bimetal Thermostat KST 10A 16A 250V	Model:	KST- A，B，C，D，R
Agency Approvals:	UL&CUL ,TUV, CQC	Operating Temperature:	260℃ Max
Tolerance:	±5 ℃，±10 ℃ (customizable)	Reset Temp:	10℃ To 30℃ (customizable)
Contact Resistance:	Less Than 50mΩ	Hi-Pot Test:	1500vac 0.5mA 1min
Endurance:	100,000 Cikli	Insulation Resistance:	> 10MΩ
Ratings:	125V~ 15A 250V~ 16A	Vrsta:	Adjustable
Visoka svetloba:	KST A Bimetal Temperature Switch, CQC UL TUV 10A / 16A Bimetal Thermostat

Temperaturno stikalo Bimetalni grelni termostat za toaster, Cvrtnik na maščobi, Topla električna luč

Adjustable KST Bimetal Thermostat Switch For Electric Iron, Kuhalnik riža

Description Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Rice Cooker
KST series adjustable thermostat is designed for High- power loading appliance with maximum current of 16A. Thermostat is operating by sensing ambient heat and the heat transmit through the metal mounting plate. It has various mounting design customized for different appliance upon requirements. Widely used in fan heater, pečica, and convection heater.

Features Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
* Stable performance
* Nastavljiva temperatura
* High temperature control accuracy
* High reliability
* Long life
* Less interference with radio.

Dimensions Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer (mm)

1	Metal Bracket
2	Block Plate
3	Ceramic Tube
4	Turning Shaft
5	Stud Screw
6	Terminal Tab
7	Upper Spring Sheet/Connect Sheet
8	Lower Spring Sheet/Calefaction Sheet/Mica Washer
9	Thin Ceramic Pin/Calefaction Sheet
10	Bi-metal
11	Fixed Contact
12	Moving Contact
13	Contact Plate
14	Ceramic Pin
15	Rivet
16	Keramika
17	Mounting Plate

Applications Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
KST series temperature switch, KST – A, KST – B – C, KST – D and KST – R.
KST series temperature switch is mainly applied to grill, električni likalnik, fan heater, oil heater, simmer pot,
frying pan and protection circuits.

Standard Ratings Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer

Custom size Of The Adjustable Bimetal Thermostat KST 10A /16A 250V

UL&CUL	125V AC 15A
TUV	250V AC 10A/16A
CQC	250V AC 10A
Operating Life:
UL&CUL	100000 cycle
TUV	100000 cycle
CQC	10000 cycle
Maks. Ambient Temperature	T250 oC
Temperature Control Range	60~250°C
Temperature Control Precision	+ 10 oC
ON~OFF Difference	10~40 oC,
length of tune up shaft	can design depending on demand
Hi-pot	2000V AC 1 minute
Odobritev	UL&CUL TUV CQC ROHS

PRODUCT ADVANTAGES Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
● The structure and size of the mounting plate can be changed according to the actual situation of the customer;
● The terminal can be screwed or fast-connected according to customer’s requirements. The position of the terminal can also be changed according to the actual situation.
● The dimensions in parentheses are variable according to the actual situation. The drawings are for reference only.

INSTALLATION AND DIRECTION FOR USE Of The Adjustable Bimetal Thermostat KST 10A 16A 250V For Fryer
1. Grounding method: Connected to the grounding metal parts of the equipment through the metal casing of the thermostat.
2. The thermostat shall be operated in a general indoor environment where the relative humidity of the air is not more than 90%, no corrosive gas, no flammable gas and conductive dust.
3. When the temperature controller is in contact with the temperature, the cover should be placed close to the heat-generating part of the controlled appliance, and the thermal surface of the cover should be coated with thermal grease or other similar heat-conducting medium.
4. When the temperature controller is exposed to liquid or steam, it is recommended to use a stainless steel cover and a reliable leak-proof measure to prevent liquid from seeping into the insulation of the thermostat.
5. It is not possible to collapse or deform the top of the cover to avoid changes in operating temperature or other properties.
6. Do not allow liquid to penetrate inside the thermostat! The housing must be protected from excessive forces to prevent cracking; the housing should be kept clean to prevent contamination of conductive materials to prevent short-circuit breakdown due to reduced insulation.
7. The terminal cannot be bent during use, otherwise the reliability of the electrical connection will be affected.