Bimetal snap disc thermostat

The Bimetal snap disc thermostat ( Thermal Cut-Off switches Kit, snap disc Thermal switch Kit) prevents the dryer from overheating when the dryer high limit Thermal switch fails in a closed circuit condition.

The Bimetal snap disc thermostat ( Thermal Cut-Off switches Kit, snap disc Thermal switch Kit) prevents the dryer from overheating when the dryer high limit Thermal switch fails in a closed circuit condition. This part Cut-Off Circuit when the heater housing does not have adequate airflow through it; this is normally caused by restriction in the exhaust vent, plugged lint screen, or broken blower wheel. If this part fails, the dryer may not produce any heat. This kit includes one snap disc Thermal switch with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse. jumper wires, and new female spade terminals Wire harness . Both components are mounted on the heater housing, and measure approximately 2 inches long and 1.5 inches wide each. This Thermal Cut-Off comes in silver and is constructed of metal.

Technical Parameters
1. Electrical parameters: 1) CQC, VDE, UL, CUL? AC250V 50 ~ 60Hz 5A / 10A / 15A (resistive load)
2) UL AC 125V 50Hz 15A (resistive load)
2. Operating temperature range: 0 ~ 240 ° C (optional), temperature accuracy: ± 2 ± 3 ± 5 ± 10 ° C
3. The difference between recovery and action temperature: 8 ~ 100 (optional)
4. Wiring method: plug-in terminal 250 # (optional bend 0 ~ 90 °); plug-in terminal 187 # (optional bend 0 ~ 90 °, thickness 0.5, 0.8mm optional)
5. Service life: ≥100,000 times
6. Electrical strength: AC 50Hz 1800V for 1min, no flicker, no breakdown
7. Contact resistance: ≤50mΩ
8. Insulation resistance: ≥100MΩ
9. Contact form: Normally closed: temperature rise, contact open, temperature drop, contact open;
Normally open: Temperature rises, contacts turn on, temperature drops, contacts turn off
10. Enclosure protection level: IP00
11. Grounding method: Connected to the grounded metal parts of the device through the thermostat metal case.
12. Installation method: It can be directly reinforced by the mother.
13.Temperature working range: -25 ℃ ∽ + 240 + 1 ℃ ∽2 ℃
Features
It has the characteristics of stable performance, high accuracy, small size, light weight, high reliability, long life, and little concern for radio.

 Bimetal thermal protection

Bimetal thermal protection

Reset Snap Disc Thermostat

Reset Snap Disc Thermostat

dryer Thermal Cut-Off switches

dryer Thermal Cut-Off switches

Kontaktirajte nas

Čakam na vašo e-pošto, vam bomo odgovorili v roku 12 ure z dragocenimi informacijami, ki jih potrebujete.

PORODNI IZDELKI

Zahtevajte ponudbo

Izpolnite obrazec za povpraševanje po ponudbi in na vaše sporočilo bomo odgovorili v najkrajšem možnem času!