Ksd9700 Termostat N.C 5A / 10En bimetall temperaturkontrollbrytare

KSD-9700 serie 5A, 10A, 16A, 20A, 25A, 40A, AC 250V 50～60Hz termostat termiskt skydd åtgärdsbrytare består av skålform högkänsligt bimetallelement, rörligt kontakthuvud, statiskt kontaktstycke, stryksulan, yttre hölje, Ghermal resistent bly och så vidare. The bimetal disc is in free state and the contacts are closed when the electrical appliance is working in normal condition. When the ambient temperature raises to the preset operating temperature, the contacts open as the bimetal disc deforms to jump when being heated, then the circuit is cut off to control the temperature .Then the contacts will close automatically to cut on the circuit when the electrical appliance is cooled down to the reset temperature. The bimetallic element restores to its primary state and contact point is closed . The electric appliance restores its work. The product has many advantages such as small in resistor, puick in temperature feeling, fast in action. Safe and reliable. compact and so on. This product is widely used in home appliance’s motor and electrical equipment, such as air conditioner motor, transformator, thermal appliances, etc.

KSD9700 Bimetallisk termisk skyddsbrytare

KSD9700 5A 10A 250V termisk avstängningstermostat

KSD9700 Temperature Switch 5A 250V N.O. N.C

Specifikationer
Märkspänning: AC 250V 50～60Hz
Märkström: 5A, 10A, 16A, 20A, 25A, 40A of Resistive Load
Switch Type and Number of poles: 1 pole opener
IP-Protection Degree: IP00
Action Type: 1A
Operation Cycles: 10000 cykel
Insulation material PTI value : 175V
Resistance of Contact: ≤ 50mΩ (original state)
Resistance of Insulated : >100MΩ(DC500V normality)
Test Voltage : ≥ 1250V/1min(nomality)
1 or 2 Temperaturkontrollbrytare
Modell : KSD9700
Material : Metal case
Kontakt : NC(Normal Closed)/INGA(Normal Open)
Temperature : 15°C~155°C
Nominell effekt : 250V 5A
Lead Wire Length : 7.3cm / 2.9″
Huvuddimension : 20 x 7.5 x 3.5mm/0.78″ x 0.3″ x 0.14″(L*W*T)

Precautions for use:
1. Do not deform or collapse the casing during installation!
2, this product is not suitable for use in the air temperature, only for contact temperature!
(Can be fixed by tie wire, iron wire, fixing seat or 704 silicone rubber)
3, the metal case is charged, not suitable for working in water.
The plastic case should not be immersed in the insulating seal when it is placed in the water.
4. When the product is installed, the temperature control switch should be close to the mounting surface of the controlled appliance.