Termiskt motorskydd

En temperaturkontrollbrytare som använder en bimetallplåt som ett temperaturavkännande element:
Termiskt motorskydd KSD9700, 8AM, 3MP, 6AP, 5AP, 2MP-seriens produkter är en termostat som använder en bimetallplåt som ett temperaturavkännande element. När den elektriska apparaten fungerar normalt, bimetallstycket är i ett fritt tillstånd och kontakterna är i ett stängt/öppet tillstånd. When the temperature rises to the operating temperature value, the bimetallic element is heated and generates internal stress to act quickly, opening/closing the contacts, cutting off/connecting the circuit, spelar därmed en termisk skyddsroll. When the temperature drops to the reset temperature, the contacts automatically close/open and return to normal working conditions. Widely used in household appliance motors and electrical equipment, such as washing machine motors, air conditioning fan motors, transformatorer, ballaster, elektriska värmeapparater, etc.

The motor thermal protector product is a thermostat that uses a bimetallic sheet as a temperature sensing element. När den elektriska apparaten fungerar normalt, the bimetallic sheet is in a free state and the contacts are in a closed/open state. When the temperature rises to the action temperature value When the bimetal element is heated, it generates internal stress and acts quickly to open/close the contacts and cut off/connect the circuit, thus playing a thermal protection role.

Försiktighetsåtgärder
1. When using contact temperature sensing installation, the product should be close to the installation surface of the controlled appliance.
2. Do not collapse or deform the plastic or metal casing during installation to avoid affecting performance.
3. For metal-cased products with an insulating jacket, do not remove the insulating jacket or crush it during installation to avoid leakage and ensure safe use.
4. When the product is used in a circuit with a current of no more than 5A, a copper core cross-section of 0.4-0.75㎜2 should be used to connect it.
5. The product should be stored in a ventilated, clean, dry place with a relative humidity less than 90% and an ambient temperature below 40°C, without corrosive gases.

Electrical Specifications
25amps/15 volts DC, 15amps/30 volts DC

Technical Parameters
Operating temperature range: 50℃-180℃. Any temperature within the range can be provided according to customer requirements.
Temperature tolerance: ±5℃, ±8℃
Select the control overload current trip range 1~25A
Escape time: 4~10s
Application scope:
Power tools, mixers, submersible pumps, high-pressure cleaners, oil pump motors, large wiper motors
Washing machines, dammsugare, ballaster, transformatorer