produktkategori
Produkttaggar
bepansrade termoelement sensor
blad Säkringshållare
Säkring för bilblad
Bilsäkring
Keramisk rörsäkring
Strömbrytare
Skivtermostater
Ds18b20 temperatursensor
elektrisk säkring
Snabb/långsam säkring
Säkringsboxhållare
Glasrörssäkring
Inline säkringshållare
Limit Snap Disc-termostat
Mini effektbrytare
Motor överbelastningsskydd
Termiskt motorskydd
NTC-sensor
NTC termistorsensor
PCB-monterad säkringshållare
PPTC återställbar säkring
PT100 Temperaturgivare
PTC termistor
sensorkontaktnät
Sensorsonder & Kablar
Slow Blow Micro Fuse
Ytmonterade säkringar
Temp Cutoff Link
Temperaturkontrollbrytare
Temperatursäkring
Temperatursensor
Temperaturgivare kabel
Temperatursensorsond
temp switch
Termisk avstängning
Termisk brytare
Termisk säkring
termiskt skydd
Termobrytare
Termistorsensorsond
Disc Self Hold Thermal CUT OUT & Resistor Combination
The KSD301 / KSD302 series self-hold thermal cut-outs have an internal heater to stop them from auto-resetting. This means they can be located remotely and reset by switching off the applied voltage. KSD series 1/2″ , 3/4”disc manual-reset thermal cutouts offer extra thermal protection where auto-resetting devices are not desirable.
Kategorier: Termobrytare, termostat
Taggar: Skivtermostater, Temp Cutoff Link, temp switch, Temperaturkontrollbrytare, Termisk brytare, Termisk avstängning, termiskt skydd, Termobrytare
KSD301 / KSD302 thermostat disc self hold thermal cut out is a safety device that prevents a heater from overheating or faulting:
How thermostat disc self hold thermal cut out works?
When the temperature reaches a predetermined level, the thermostat opens, and the contacts remain open. The only way to reset the device is to remove power from the circuit.
thermostat disc self hold thermal cut out Benefits:
A self hold thermal cut out offers extra safety compared to an automatic reset device, and it works similarly to a manual reset device without the need for a push button.
Types of self hold thermal cut outs
Some types of self hold thermal cut outs include:
KSD301 / KSD302: A combination of a thermostat and a resistor, where the resistor is located below the thermostat’s contact arm.
KSD301 / KSD302 EAW SO: Similar to an auto-reset type, but with an internal heating resistor that prevents the bimetal disc from auto-resetting.
KSD302-T: A 1/2” disc PTC thermal cut-out that features easy mounting, rapid heat transmission, high durability, and high precision.
FEATURES
Recognized UL component, tested to UL standard 873
Available with surface, air sensing, well or cavity type mountings
High switching current 25~60 AMP/240 volts
Reliable temperature performance over the life of the device
Ultimate safety device in critical applications
Also available for 115VAC, 24VAC/DC, 48VAC/DC, applications
Various mounting configurations along with different terminations available
CODE | OPEN TEMP | RESET TEMP | CODE | OPEN TEMP | RESET TEMP | |
45 | 45±5°C | ≥33°C | 140 | 140±5°C | 100±15°C | |
50 | 50±5°C | ≥35°C | 145 | 145±5°C | 100±15°C | |
55 | 55±5°C | 42±6°C | 150 | 150±5°C | 105±15°C | |
60 | 60±5°C | 45±8°C | 155 | 155±5°C | 110±15°C | |
65 | 65±5°C | 48±10°C | 160 | 160±5°C | 115±15°C | |
70 | 70±5°C | 50±12°C | 165 | 165±5°C | 120±15°C | |
75 | 75±5°C | 53±14°C | 170 | 170±3°C | 155±5°C | |
80 | 80±5°C | 55±15°C | 175 | 175±5°C | 130±15°C | |
85 | 85±5°C | 60±15°C | 180 | 180±5°C | 135±15°C | |
90 | 90±5°C | 65±15°C | 185 | 185±5°C | 140±15°C | |
95 | 95±5°C | 70±15°C | 190 | 190±5°C | 145±15°C | |
100 | 100±5°C | 70±15°C | 195 | 195±5°C | 150±15°C | |
105 | 105±5°C | 75±15°C | 200 | 200±5°C | 155±15°C | |
110 | 110±5°C | 75±15°C | 205 | 205±5°C | 160±15°C | |
115 | 115±5°C | 80±15°C | 210 | 210±5°C | 165±15°C | |
120 | 120±5°C | 85±15°C | 215 | 215±5°C | 170±15°C | |
125 | 125±5°C | 85±15°C | 220 | 220±5°C | 175±15°C | |
130 | 130±5°C | 90±15°C | 225 | 225±5°C | 180±15°C | |
135 | 135±5°C | 95±15°C | 230 | 230±5°C | 185±15°C |
Kontakta oss
Väntar på ditt mejl, vi kommer att svara dig inom 12 timmar med värdefull information du behövde.
RELATERADE PRODUKTER
China Temp Control Disc 3/4″ Limit Snap Thermostat With High Current
These precision custom 3/4″ bimetal Limit Snap Disc Thermostats can be used in high current applications; carrying up to AC 110V/400V, 15A-60A amps-240 Volts, for over 100,000 cycles. A 3/4″ bimetal thermodisc at the heart of our thermostat is set to a precise temperature range within -5°~393°F (-20°-200°C). Product certification: TUV, CE, UL, CUL, CQC.
TO-220 PCB-Bimetal Disc Small Thermal Protection Thermostat
JUC 31F / ST01 B U8 Series TO-220 PCB-Bimetal Disc Thermostat: A snap action SPST bimetallic thermostat that meets RoHs standards.
JUC 31F / ST01 B U8, 6700 Series TO-220 Subminiature Thermostat: A subminiature bimetal disc thermostat with a contact resistance of 50 milliohms max. It has a switch capability of up to 2 amp for 48 VDC or 120 VAC for 30,000 cycles.