When selecting a thermistor, it is indeed necessary to comprehensively consider many key parameters and packaging (epoxy resin Encapsulation, Glass Bead Encapsulation, thin film Encapsulation, SMD Encapsulation, stainless steel probe sensor Encapsulation, injection molding coating). Let me tell you in detail:
The resistance range of thermistors is wide, and the resistance of NTC thermistors can range from tens of ohms to ten thousand ohms, and even special devices can be customized according to needs. Commonly used resistance values are 2.5Ω, 5Åh, 10Åh, etc., and common resistance errors are ±15%, ±20%, ±30%, etc. The resistance range of PTC thermistors is usually from 1KΩ to hundreds of KΩ.
Reasonable arrangement of temperature sensors: The location and arrangement of temperature sensors will also affect the response time. If the contact area between the sensor and the object being measured is large, the heat exchange will be faster and the response time will naturally be shorter. Dock, please note that too large a contact area may also lead to increased measurement errors, so we have to make a trade-off based on the actual situation.
As a component that can change the resistance value according to temperature changes, thermistors have a wide range of applications (such as temperature measurement, temperaturkontroll, temperature compensation, temperature alarm, battery thermal protection). Let me share with you several application cases of thermistors:
The connection method of the NTC thermistor temperature sensor needs to be determined according to the actual application scenario and measurement requirements. During the wiring process, be sure to pay attention to the pin polarity, wire selection, temperaturintervall, filtering and decoupling, grounding treatment, and verification and calibration to ensure the accuracy and reliability of the measurement.
The main difference between a Pt100 and a Pt1000 sensor is their nominal resistance at 0°C, with a Pt100 having a resistance of 100 ohms and a Pt1000 having a resistance of 1000 ohms, meaning the Pt1000 has a significantly higher resistance, making it more suitable for applications where precise temperature measurement is needed with minimal influence from lead wire resistance, especially in 2-wire circuit configurations;
PT100, the full name of platinum thermal resistor, is a resistive temperature sensor made of platinum (Pt), and its resistance value changes with temperature. De 100 after PT means that its resistance value is 100 ohms at 0℃, and its resistance value is about 138.5 ohms at 100℃.
This article explores 2-, 3-, and 4-wire configurations for resistance temperature detectors (FoTU:er), focusing on how environmental factors, accuracy requirements, cost, and wire configuration affect selection. The 4-wire configuration is complex but offers the highest accuracy, while the 2-wire configuration has advantages in lower-accuracy applications. Choosing a configuration requires a combination of application requirements and practical conditions.
An RTD (Resistance Temperature Detector) is a sensor whose resistance changes as its temperature changes. The resistance increases as the temperature of the sensor increases. The resistance vs temperature relationship is well known and is repeatable over time.
The main difference between an RTD and a Pt100 is the material used for the sensing element: PT100 is a specific type of RTD thermal resistor, and its name comes from “Platinum” (platinum) och “100” (100 ohm vid 0°C). It is the most commonly used RTD sensor and is widely used in industrial process control, laboratory measurement and other fields that require high-precision temperature monitoring. The advantages of PT100 include:
English
العربية
Български
粤语
中文(简体)
中文(漢字)
Nederlands
Suomi
Français
Deutsch
Ελληνικά
Magyar
Italiano
日本語
한국어
Polski
Português
Română
Русский
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Tiếng Việt