The main difference between a Pt100 and a Pt1000 sensor is their nominal resistance at 0°C, with a Pt100 having a resistance of 100 ohms and a Pt1000 having a resistance of 1000 ohms, meaning the Pt1000 has a significantly higher resistance, making it more suitable for applications where precise temperature measurement is needed with minimal influence from lead wire resistance, especially in 2-wire circuit configurations;
PT100, the full name of platinum thermal resistor, is a resistive temperature sensor made of platinum (Pt), and its resistance value changes with temperature. The 100 after PT means that its resistance value is 100 ohms at 0℃, and its resistance value is about 138.5 ohms at 100℃.
This article explores 2-, 3-, and 4-wire configurations for resistance temperature detectors (RTDs), focusing on how environmental factors, accuracy requirements, cost, and wire configuration affect selection. The 4-wire configuration is complex but offers the highest accuracy, while the 2-wire configuration has advantages in lower-accuracy applications. Choosing a configuration requires a combination of application requirements and practical conditions.
An RTD (Resistance Temperature Detector) is a sensor whose resistance changes as its temperature changes. The resistance increases as the temperature of the sensor increases. The resistance vs temperature relationship is well known and is repeatable over time.
The main difference between an RTD and a Pt100 is the material used for the sensing element: PT100 is a specific type of RTD thermal resistor, and its name comes from “Platinum” (platinum) and “100” (100 ohms at 0°C). It is the most commonly used RTD sensor and is widely used in industrial process control, laboratory measurement and other fields that require high-precision temperature monitoring. The advantages of PT100 include:
The thermal resistance formula is in the form of Rt=Ro(1+A*t+B*t*t);Rt=Ro[1+A*t+B*t*t+C(t-100)*t*t*t], t represents Celsius temperature, Ro is the resistance value at zero degrees Celsius, A, B, C are all specified coefficients, for Pt100, Ro is equal to 100℃.
A PT100 sensor acquires temperature by measuring the change in its electrical resistance, which directly correlates to the temperature it is exposed to; as the temperature increases, the resistance of the platinum element within the sensor also increases, allowing for a precise calculation of the temperature based on this resistance change; essentially, the “100” in PT100 signifies that the sensor has a resistance of 100 ohms at 0°C, and this value changes predictably with temperature fluctuations.
Platinum resistors are widely used in the medium temperature range (-200～650℃). At present, there are standard temperature measuring thermal resistors made of metal platinum on the market, such as Pt100, Pt500, Pt1000, etc.
The temperature measurement range of the commonly used platinum resistance Pt100 sensor probes is -200～850℃, and the temperature measurement ranges of Pt500, Pt1000 sensor probes, etc. are successively reduced. Pt1000, temperature measurement range is -200～420℃. According to the IEC751 international standard, the temperature characteristics of the platinum resistor Pt1000 meet the following requirements:
Comparison between PT100 temperature sensor probe and DS18B20 module
1) Basic principle of signal acquisition
① The resistance of PT100 changes proportionally with the temperature (the higher the temperature, the greater the resistance), but the resistance change is very small, about 0.385 Ω / degree;
English
العربية
Български
粤语
中文(简体)
中文(漢字)
Nederlands
Suomi
Français
Deutsch
Ελληνικά
Magyar
Italiano
日本語
한국어
Polski
Português
Română
Русский
Slovenščina
Español
Svenska
ภาษาไทย
Türkçe
Tiếng Việt