เทอร์โมสตัทดิสก์สแน็ป Bimetal

เทอร์โมสตัทดิสก์สแน็ป Bimetal ( ชุดสวิตช์ตัดความร้อน, ชุดสวิตช์ความร้อนแผ่นดิสก์ snap) ป้องกันไม่ให้เครื่องเป่าร้อนเกินไปเมื่อสวิตช์ความร้อนที่มีขีดจำกัดสูงของเครื่องเป่าล้มเหลวในสภาวะวงจรปิด.

เทอร์โมสตัทดิสก์สแน็ป Bimetal ( ชุดสวิตช์ตัดความร้อน, ชุดสวิตช์ความร้อนแผ่นดิสก์ snap) ป้องกันไม่ให้เครื่องเป่าร้อนเกินไปเมื่อสวิตช์ความร้อนที่มีขีดจำกัดสูงของเครื่องเป่าล้มเหลวในสภาวะวงจรปิด. This part Cut-Off Circuit when the heater housing does not have adequate airflow through it; this is normally caused by restriction in the exhaust vent, plugged lint screen, or broken blower wheel. If this part fails, the dryer may not produce any heat. This kit includes one snap disc Thermal switch with a limit of 250 องศาฟาเรนไฮต์, and one thermal cut-off fuse. jumper wires, and new female spade terminals Wire harness . Both components are mounted on the heater housing, and measure approximately 2 inches long and 1.5 inches wide each. This Thermal Cut-Off comes in silver and is constructed of metal.

พารามิเตอร์ทางเทคนิค
1. พารามิเตอร์ทางไฟฟ้า: 1) ซีคิวซี, วีดีอี, แอล, ค.ศ? AC250V 50 ~60เฮิร์ต5A / 10ก / 15ก (โหลดตัวต้านทาน)
2) UL AC 125V 50Hz 15A (โหลดตัวต้านทาน)
2. ช่วงอุณหภูมิในการทำงาน: 0 - 240 ° C (ไม่จำเป็น), ความแม่นยำของอุณหภูมิ: ± 2 ± 3 ± 5 ± 10 ° C
3. The difference between recovery and action temperature: 8 - 100 ℃ (ไม่จำเป็น)
4. วิธีการเดินสายไฟ: plug-in terminal 250 # (optional bend 0 - 90 °); plug-in terminal 187 # (optional bend 0 - 90 °, ความหนา 0.5, 0.8มม. ไม่จำเป็น)
5. Service life: ≥100,000 times
6. ความแรงทางไฟฟ้า: ไฟ AC 50Hz 1800V นาน 1 นาที, ไม่มีการสั่นไหว, ไม่มีรายละเอียด
7. ความต้านทานต่อการสัมผัส: ≤50mΩ
8. ความต้านทานฉนวน: ≥100MΩ
9. แบบฟอร์มการติดต่อ: ปกติปิดครับ: อุณหภูมิที่เพิ่มขึ้น, contact open, temperature drop, contact open;
Normally open: Temperature rises, contacts turn on, อุณหภูมิลดลง, contacts turn off
10. Enclosure protection level: ไอพี00
11. วิธีการต่อสายดิน: Connected to the grounded metal parts of the device through the thermostat metal case.
12. วิธีการติดตั้ง: It can be directly reinforced by the mother.
13.Temperature working range: -25 ℃ ∽ + 240 ℃ + 1 ℃ ∽2 ℃
คุณสมบัติ
It has the characteristics of stable performance, ความแม่นยำสูง, ขนาดเล็ก, น้ำหนักเบา, ความน่าเชื่อถือสูง, ชีวิตที่ยืนยาว, and little concern for radio.

 Bimetal thermal protection

Bimetal thermal protection

Reset Snap Disc Thermostat

Reset Snap Disc Thermostat

สวิตช์ตัดความร้อนของเครื่องเป่า

สวิตช์ตัดความร้อนของเครื่องเป่า

ติดต่อเรา

กำลังรออีเมลของคุณ, เราจะตอบกลับคุณภายใน 12 ชั่วโมงด้วยข้อมูลอันมีค่าที่คุณต้องการ.

สินค้าที่เกี่ยวข้อง

ขอใบเสนอราคา

กรอกแบบฟอร์มขอใบเสนอราคาของเราแล้วเราจะตอบกลับข้อความของคุณโดยเร็วที่สุด!