中國自動復位酚醛溫控器

An automatic reset phenolic 1/2″ Disc Insulated Thermostat, SPST is a temperature-regulating device that can open or close its electrical contacts based on changes in temperature:

Automatic Reset Phenolic Thermostat

KSD301帶管夾嘅酚醛溫控器

45AMP thermostat circuit breaker for quick-heat electric water heater

運作方式
The Phenolic thermostat’s bimetal disc changes temperature, and the electrical contacts automatically return to their original state when the temperature reaches the specified reset point.

應用
Automatic reset phenolic thermostats can be used for heating or cooling applications. 例如, a thermostat can be set to break the contacts when the temperature rises for heating, or when it falls for cooling.

Select Automatic Reset Phenolic Thermostat
選擇不同型號同品牌嘅Automatic Reset Phenolic恒溫器. 喺中國供應和生產嘅酚醛溫控器已透過UL, TUV公司, CE, CCC同環境認證. 包括:
霍尼韦尔: 出售3450HR04550008, 專為汽車使用而設計嘅酚醛恒溫器 ;
Senasys提供各種自動復位卡盘恒溫器, 包括 15 Amp同 25 Amp選項 ;
NGT自動復位恒溫器, 包括TYPE 11N / 11S同TYPE 50N / 50S.

Features Of Automatic Reset Thermostat

1) Contact Type: Single Pole Single Throw
2) Terminal Strength
這 250 terminal can withstand 10kg in the axial direction and 5kg in the radial direction, and the 187 terminal can withstand 8kg in the axial direction and 4kg in the radial direction for 10sec without causing functional problems.
3) Appearance
No rust, cracks, deformation and stains.
4) Shapes
Shape and size, according to customer samples or figure.

bimetallic strip Automatic Reset Thermostat

380V Electric Boiler, Electric Water Heater Limiter Thermostat

Bimetallic strip HI-power and Hi Amp thermostat for electric boiler

Structure Of Automatic Reset Thermostat

1) Bimetal momentary Automatic Reset Thermostat
When the temperature reaches the temperature range specified by the user, the temperature sensing surface feels the temperature change, and then transmits the temperature change to the bimetal strip to play the function of on/off. The temperature control switch is composed of a temperature sensing part, a switch part, a base part, an operation part and an electrical connection part.
2) Temperature sensing part
This part is composed of a bimetallic sheet and a metal aluminum cover for sensing temperature, which is used for sensing temperature.
3) Switch section
The function of this part is to turn on and off the current, and it consists of fixed contacts, moving contacts, fixed connection plates, spring sheets and rivets.
4) Base part
This part is used for insulation protection, supporting the temperature sensing part and the switch part.
5) Operation Section
This part is composed of a guide frame and an action rod, and its function is to transmit the mechanical movement of the bimetal to the switch part.
6) Electrical connection part
This part consists of the connection of external terminals and internal rivets.

Electrical properties Of Automatic Reset Thermostat 10A 250V
額定: (電阻負載)

Parameters Of Automatic Reset Thermostat

Dimension Of Automatic Reset Thermostat 10A 250V

Material Description:
Temperature sensing part: aluminum/aluminum alloy
Main body: Black A5 high temperature bakelite
Terminals: 6.3 flat/copper or iron/nickel plated
接觸: Silver Cadmium Oxide Composite/10A
Mounting Bracket: Active Mounting Ring

Uses: Temperature control or dry-burn protection

Sectional view Of Automatic Reset Thermostat

Automatic Reset Phenolic 45 Amp Thermostat Dimensions

Product technical specifications
1. The unmarked tolerance dimensions are according to GB1804-2000.m level;
2. 聯繫表格: normally closed;
Switch Type: Single Pole Single Throw (S.P.S.T);
3. Reset method: 自動重置;
4. The temperature value marked on the drawing is measured at an ambient temperature of 25°C.
If the ambient temperature changes, the product temperature value needs to be corrected;
5. 0FF: 120±3℃, ON: 110±5°C;
6. 電氣強度: 2000V/S 0.5mA without breakdown;
7. 絕緣電阻: ≥10MΩ;
8. Rated voltage/current: AC 250V 10A (電阻負載);
9. Limit temperature of installation surface: 140攝氏度;
10. Product service life: ≥100,000次
11. 產品認證: CQC質素控制, TUV公司, CB, CE, KC