溫度傳感器
China Supplier of Automotive Exhaust Temperature Sensor
The EGT sensor is responsible for reading the temperatures of the aftertreatment system components such as inlet DOC, inlet DPF, outlet DPF, inlet SCR, outlet SCR, 等。, and sending this information back to the ECM to maintain proper temperatures that control the aftertreatment system to reduce the harmful emissions.
Customize the Function of Automotive Intake Air Temperature Sensor
To customize the function of an automotive intake air temperature (IAT) sensor, you can modify the sensor’s signal output to the Engine Control Unit (ECU). This is typically achieved by adding resistance in series or parallel with the sensor, effectively altering the voltage signal the ECU receives. This can be done using a potentiometer (variable resistor) or a fixed resistor. Changing the IAT signal can influence the ECU’s decisions regarding fuel delivery and ignition timing, potentially affecting engine performance.
DALLAS DS18B20溫度傳感器探頭
超細尺寸, 超低硬件使費, 抗干擾能力強, 高精度, 強大嘅附加功能令DS18B20更受歡迎. DS18B20嘅優勢係我哋學習單片機技術和開發溫度相關小產品嘅最佳選擇. 瞭解工作原理和應用可以拓寬您的微控制器開發思路.
Defrost temperature sensor for car air conditioner and refrigerator
Refrigerator Defrost Sensor monitors the refrigerator temperature and signals the main control board to begin the defrost cycle. Temperature Sensor for Defrost Termination 2M · Sensor Type: NTC 10K, 10000Ω @ 25°C · Range: -40÷120°C · Accuracy: ±0.3°C @ 25°C · Sheath: Ø 6 x30,Ø 5 x 200. Refrigerator Defrost Sensor with Thermal Fuse & thermostat switch Sensing temperature function.
數字DS18B20溫度傳感器電纜組件
Our digital temperature sensor adopts waterproof design, high quality stainless steel tube packaging, moisture-proof and rust-proof, suitable for a variety of narrow space equipment digital temperature measurement and control field. A waterproof DS18B20 compatible 1-Wire temperature sensor with a 3m (10 ft) cable and a temperature range of -55 – +125°C (cable max. temperature 85°C).
Digital DS18B20 Temperature Sensor Module Kit Waterproof 100CM Sensor Cable
The China Custom Digital temperature sensors come with the original DS18B20, high quality in a stainless steel housing (6 * 30毫米) and 3m #24 30# 2651, UL4411認證 28# Silicone cable (120 英寸) in length.
DS18B20數字溫度傳感器探頭 – 可編程序
This is custom 1-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. 溫度傳感器支持 “1-線” 接口 (1-線), and the measurement temperature range is -55℃~+125℃.
DS18B20傳感器探頭和電纜
DS18B20溫度傳感器特性: 防水, 防腐.
包裝細節: 可根據需要定製. MAXIM原包裝進口; TO-92封裝; 大量庫存. 並提供DS18B20數字溫度傳感器,採用不銹鋼管防水封裝.
Ds18b20傳感器探頭嘅功能同應用
What sensor is ds18b20?
DS18B20 is a commonly used digital temperature sensor, which outputs a digital signal with the characteristics of small size, low hardware overhead, 抗干擾能力強,精度高. The DS18B20 digital temperature sensor is easy to wire and can be used in a variety of occasions after packaging, such as pipeline type, 螺紋型, 磁鐵吸附型, stainless steel packaging type, and various models, 包括LTM8877, LTM8874, 等.
Ds18b20 temperature sensor wiring harness
DS18B20 sensor wiring harness is a commonly used digital temperature sensor. The output is a digital signal, which has the characteristics of small size, low hardware overhead, 抗干擾能力強, and high accuracy. DS18B20 digital temperature sensor is easy to connect, and it can be applied to many occasions after being packaged, such as pipe type, screw type, magnet type, and stainless steel package type. There are various models, 包括LTM8877, LTM8874 and so on.
Electric Vehicle (EV) Battery Temperature Sensor Supplier
Battery temperature sensors have three main technical characteristics: the most mainstream is NTC thermistor (負溫度系數); the second is thin film platinum resistor (PT100/PT200); and there are emerging passive wireless sensors. It is necessary to focus on comparing their performance differences and application scenarios.