溫度傳感器
Production of platinum temperature sensor
STT-M series temperature sensors Probe are packaged with magnetic bodies. For paramagnetic metal surfaces, it can be easily sucked to the surface for temperature measurement and can be easily installed and removed. It is suitable for the detection of the key point temperature of large equipment before leaving the factory, and other occasions where the temperature detection point needs to be replaced frequently, so as to improve the efficiency of temperature detection
PT100型 / PT1000 RTD帶過程連接嘅溫度傳感器探頭
China-made PT100/PT1000 platinum thermal resistor temperature sensor. The localization process of PT100/PT1000 platinum thermal resistor temperature sensor is accelerating as the international situation is pressing. It came into being to cooperate with many companies to fully localize platinum thermal resistors.
PT100 RTD傳感器探頭 & 電纜
PT100熱電阻採集糢塊可以透過隔離嘅 485 通訊接口. RS-485允許高達 32 PT100熱阻採集糢塊將懸掛喺同一總線上. 然而, if Link-Max’s RS-485 repeater is used, 為止 256 PT100熱阻採集糢塊可以連接到同一網絡, 最大通信距離為1200m.
PT100焗爐用溫度傳感器燒烤探頭 / 燒烤 / 烤肉 / 油炸 / 吸煙者
PT100 BBQ probe Meat thermometer provides an instant readout of inner food temperature during a cooking cycle without opening the Oven / 燒烤 / 油炸 / 吸煙者; Temperature Range: 14 自 450 華度; -10 自 232 degrees Celsius; Probe cord heat resistant up to 700 華度
Pt100 temperature sensor for military equipment
Aerospace: In the aerospace field, PT100 sensors are used to measure the temperature of liquid oxygen and liquid hydrogen combustion chambers, turbine engines, fuel cells, 等. of aircraft and spacecraft. High precision, high reliability and strong stability are required.
RTD PT100 Temperature Sensor Probe with Cable
What is a Platinum thermal resistance sensor?
An RTD (Resistance Temperature Detector) is a Platinum thermal resistance whose resistance changes with changes in temperature. Its resistance increases as the sensor temperature increases. The relationship between resistance and temperature is well known and repeatable over time. RTD is a passive device. It does not produce output by itself. External electronics can be used to measure the sensor resistance by passing a small current through the sensor to produce a voltage. Typically 1 mA or less measurement current, maximum 5 馬, without risk of self-heating.
SHIBAURA熱敏電阻傳感器組件 – 探針
KG3熱敏電阻 (公斤3, KG3B-35型, KG3B-41型, KG3T-43型, KG3T-45型, KG3T-51型); KG2熱敏電阻 (KG2, KG2B-35型, KG2B-41型, KG2T-43型, KG2T-45型, KG2T-51型); RB1熱敏電阻系列 (RB1-N, RB1-S1系列, RB1-S3系列); PL熱敏電阻系列 (PL系列, PL2, PL3系列); NSIII-U1熱敏電阻 (NSIII.-U1); NSII-E3熱敏電阻 (NSII-E3系列); ADVANCED NSII-E1熱敏電阻 (NSII-E1型);
Stainless Steel NTC Thermistor Probe B3950 10K in water dispenser
The NTC temperature sensor 1% B3950 10K, 5 x 25mm with XH2.54 Connector in a water dispenser is a device used to measure the temperature of water. This sensor is usually a temperature sensor that converts the temperature information of the water into an electrical signal.
Surface Mount Temperature Sensor Probe for Rice Cooker
NTC Temperature Sensor Probe use in Rice Cooker top Cover, Commercial Cover Rice Cooker Top, Cover Temp Measuring Accessories 23.62 x 0.39 x 0.39 英寸; 0.48 ounces. 爱普科斯( EPCOS ) / AVX / SEMITEC / 斯荏 / 三菱 / OHIZUMI NTC熱敏電阻傳感器, Surface Mount Temperature Sensor. Rice cooker top lids temperature sensor– fast response time for immediate adjustments to heating power: with a quick response time, this probe allows for immediate adjustments to the heating power in order to maintain the desired temperature.
溫度探頭, 溫度傳感器類型 & 應用
溫度探頭係一種用于測量溫度嘅設備, 通常由敏感元件和測量電路組成. 敏感元件可以係熱電偶 (PT100, PT1000系列), A熱敏電阻 (NTC, PTC), 半導體 (DS18B20數字化), 等。, 它可以把溫度變化轉換為電信號. 然後它被放大, 過濾, 轉換, 並由測量電路處理, 最後輸出與溫度成正比嘅電信號.