Showing 25–36 之 64 結果

Defrost Low Temperature Thermal Cutoff Switch

Defrost Thermal Cutoff Switch Feature:1. Use the defrost temperature control switch + 熱熔斷器線束 : Refrigerators are generally equipped with a cooling regulator. Users can adjust the temperature inside the refrigerator by turning the knob of the cooling regulator. Generally speaking, the temperature adjustment range is 1℃-7℃, and users can adjust it freely according to their needs.

除霜溫度開關 + 熱熔斷器線束

冰箱除霜熱敏掣 + 電纜: 除霜溫控器透過溫度傳感器檢測環境溫度. 呢啲傳感器將檢測到嘅溫度值轉換為電信號, 然後將其傳遞到控制電路進行處理.

碟片3/4″ Snap Disc限位溫度控制掣, Open on Rise 36T恒溫器

China Made to replace White Rodgers 3L01-250 3/4″ Snap Disc限位溫度控制掣 (艾默生3L02-200, 3L05系列, 3L01-180系列, ), 切入- 115 F度, 斷流器 – 130 F度 (Open on Rise).

Disc Self Hold Thermal CUT OUT & Resistor Combination

The KSD301 / KSD302 series self-hold thermal cut-outs have an internal heater to stop them from auto-resetting. This means they can be located remotely and reset by switching off the applied voltage. KSD series 1/2″ , 3/4”disc manual-reset thermal cutouts offer extra thermal protection where auto-resetting devices are not desirable.

德國McCormick Thermik S06 120.05 150.05 125.05 電機恒溫器掣

產品系列: ST06電機恒溫掣替代德國麥考密克Thermik S06 S06 120.05 150.05 125.05
電氣參數: 6,3 一個~ 25 一個
常閉;
自動重置;
帶連接綫;
常閉;
自動重置;
帶連接綫;
聚酯薄膜 – Nomex絕緣紙;

風筒SEKI ST-12微動式熱敏掣

風筒嘅過熱保護SEKI ST-12係一種溫度控制器,使用雙金屬片作為溫度傳感元件. 防止風筒長時間運行時電熱絲過熱和燒壞.

大電流, 大功率雙金屬卡扣盤式恆溫器

大電流, 大功率雙金屬卡扣式恆溫器和溫度開關. YAXUN生產嘅溫控器性能穩定,電流大. 現時, 係國內通過50A、60A電流獲得TUV同UL安全認證嘅企業.

JUC-31F/KSD-01F/67F040溫度掣TO220雙金屬片熱控溫控器

JUC-31F/KSD-01F/67F040 Temperature Switch (Normally Opened) TO220 plug-in bimetal thermal Control Thermostat for Testers Cooling Air Conditioning. JUC 31F Series TO-220 PCB-Bimetal Disc Thermostat meets RoHs standards. As a snap action SPST bimetallic thermostat, it gives accurate regulation for one device.

klixon 3MP+PTC過載保護器,用于電機斷電復位

3MP+PTC電流過載保護器 (具有關機復位功能)
PTC自持功能: 当過載跳掣時, 切斷電源後可自動開啟.
具有延時保護功能. 它採用美國德州儀器KLIXON ®嘅專有技術生產.

KSD301 10A 250V常閉 / NO恒溫器溫度開關熱控掣

KSD301數控 / NO(常開/常閉)熱控制開關電氣額定值 : 16一個125V交流電 (電阻負載). 10一個250V交流恒溫器. 16一個250V交流電. 工作溫度 : 50 ~ 230°C (UL. 銅205°C). 雙金屬反應,自動重置ThermoStar, 塑料恒溫器外殼, 固定保護支架.

KSD301 250V 10A N.C / N.O Thermostat Temperature Control Switch

KSD301 series snap-action bimetal thermostat is a kind of miniature hermetically sealed bimetal thermostat. (1/2″ 碟片). Widely used for temperature control or protection for household electric appliances. Crafted from high-quality alloy, this switch is built to withstand the rigors of daily use and maintain its performance over time. 它採用單刀單擲結構,可在電阻負載下工作. KSD301 bimetal thermostat is in wide use in a great variety of compact type home electrical appliances.

KSD301 Bimetal Sensor Thermal Switch, Custom Bimetal Sensor Thermostat

The main principle of KSD 301 series Auto / Manual Reset thermostat is that one function of bimetal discs is snap action under the change of sensing temperature. The snap action of disc can push the action of the contacts through the inside structure, and then caused on of off the circuit finally.